The Pitted ware dwelling site Ajvide on the west coast of Gotland in the Baltic Sea is, because of its long continuity from the late Mesolithic to the middle of the Scandinavian Bronze Age, an interesting research object concerning Stone Age in the Baltic area. In this essay, a comparison between two activity areas on Ajvide have been carried out in the purpose of finding out what these areas may have been used for during the middle Neolithic.  It has been showed, through zooarchaeological analyses of animal bones, that the areas most likely are depositing sites for slaughters refuse and food debris. If it is a result of everyday or more ceremonial activities is left undetermined..

AbstractThe research project Liberation, supported by the European Commission under the Environment and Sustainable Development Programme (Fifth RTD Framework Programme) aimed at developing a decision support system for ecological risk assessment of contaminated sites has proposed a tiered system including the triad method. This method integrates contaminant chemistry and bioavailability analyses with observed ecotoxicological effects in soil and groundwater. In this study the triad method was used to perform a risk characterization of a former surface treatment and metal industry, now used for the student union buildings of the Mälardalen University in Eskilstuna, Sweden. On the site, high concentrations of copper, zinc and nickel have been detected in the soil in a preliminary investigation of contaminant levels with XRF. For performing the risk assessment of the site according to the triad method, contaminant bioavailability, soil metal concentrations and soil toxicity were determined and an ecological assessment was carried out on four selected soil samples (one reference soil and three samples with low (B), medium (C) and high (D) contaminant levels). Contaminant bioavailability was measured through leaching (ISO TC 190/S7) and biouptake tests (DGT).

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

Enaforsholms mountain garden is situated in the western parts of the Swedish province Jämtland. This means a maritime climate. After a donation made by wholesaler A. W. Bergsten the country estate became KSLA property in 1937.

Tidningskompaniet, a publishing agency in Göteborg, has during the spring of 2003 developed a customermagazine for Göteborgsvarvet, a Half Marathon Race in Göteborg. If realized the magazine shallbe distributed to former participants of the race twice a year and will be financed by adverts.As part of the editorial concept, development of a graphic profile will be made for the magazine. Thisdegree project will result in the production of a »dummy« magazine to be presented to the client and tobe used by the advertisement sales people in their work.The magazine, named »Varvet«, will convey the message that anyone can run Göteborgsvarvet. Theintention is to give the magazine a »youthful and sporty« image.The work in this degree project has comprised designing the magazine in co-operation with an editorialconcept developer and a project leader at Tidningskompaniet, and also the production of 18 magazinepages including prepress work. The magazine has been made into a strictly sectionized product,with a mix of short and long articles with lighter material and strict how-to-do-it guides.

This essay research the characteristics of the place-name Kiven?bben (with variation) in the Swedish region of V?sterg?tland, and its possible connection to the fortification term kiven?bb. The purpose is to deepen and nuance earlier brief reaserches made for the subject. The essay uses the theories of the urban planner Kevin Lynch to rule out if it is likely that the places with kiven?bb-names in V?sterg?tland were named after a fortification in the closest area.

In this paper I will attempt to recreate a prehistoric landscape surrounding the rock carving site of Släbro at Nyköping in Södermanlands län by using GIS. The main focus area is the river valley at Släbro and the six panels with rock carvings that have been dated to the Bronze Age. I?ll attempt to shed light on a long lost landscape. The shore line displacement have been extensive in this area a reconstruction will visualize the relationship between the panels, and their relationship to the surrounding landscape.

Population growth leads to an increased need for new buildings, both residential and commercial. The regulations of structural design also changes with time. From a sustainable community perspective it may be profitable if existing buildings, that no longer performs their original function, are reconditioned. Knowledge and understanding of the surroundings of the residence must be available. Regulations regarding accessibility to all has increased.

Today many companies and municipalities requires that their suppliers should have an environmental management system to work by. This might be one of the reasons to the increasing number of companies that today are implementing environmental management systems. Care of Haus is one of the companies that thinks that the benefits are bigger than the disadvantages, when it comes to environmental management systems, therefore they have made the choice to work with ISO 14001.The ISO 14001 standard is deified on the PDCA- cycle. PDCA stands for Plan, do check and act. Care of Haus choose to work with the ISO 14001 standard since it is a well-known standard for the companies that?s Care of Haus collaborates with and it is also well-known within their clienteleWithin this report an environmental investigation has been made.

This thesis is built on a field study that was carried out in two seed-tree stands near by Götbrunna in Uppland, Sweden. The aim was to examine if scarification carried out in spring time could generate a more dense seedling establishment when using natural generation, than scarification carried out in autumn. It was also investigated whether there were differences in mortality the first season between the two plot-types. Plots were established block-wise with 50 blocks (pairs) on each site. The spring scarification was made with a hoe during 22-23 of April.

This report concentrates on why more people do not choose an environmentally friendly car instead of a conventional car. To find this answer we have used theories that include decision - behavior and environment - philosophy. We have also made four surveys, which includes several interviews. The results of these interviews, together with the secondary data we have found, have been analyzed against the theories made by our choice. We have found that the stimulus that we have today isn?t enough to make more people choose an environmentally friendly car instead of a conventional car.

Fresh Kills park and the The High line park in New York, Downsview park outside Toronto the birch landscape at Shiphol Airport have something more in common than being big new park landscapes.They all include thoughts and images about ecology. These images are neither typically nature picturesque nor typically garden stylish. In Sweden we have the biotopes of Ankarparken, the new design of Kristinebergsparken. At Chelsea Flower Show in England Swedish nature put in a garden format is winning awards. There are some new ecological influence in the air.

This report presents the preliminary study and work for the development of a site structure for the upcoming reengineering of inter-tool Infopunkt. The report describes how I have conducted a study regarding the current inter-tool information center and its development potential. Thereafter compiling the information to develop a comprehensive design approach to create a sitemap. The sitemap illustrates a new updated page structure for Infopunkt and was the primary goal of the thesis. The sitemap I have developed will form the basis for the agency that will later on develop the new updated version of Infopunkt..

The thesis describes the following main question: Will the administrative labour during football tournaments be made easier with the help from a mobile web service or will it convey to unnecessary extra work? To be able to give a good and qualified answer to this question, the thesis will in the beginning describe how the technique for such a system might look like and also describe the existing administrative moments during a football tournament, this is too give the reader a deeper understanding for further reading. The thesis then goes on to describe a concrete system which is tested on three football tournaments. On the basis of the tests, interviews and through analysis of these the thesis will be able to answer our questions. The result which we present in the thesis have unfolded through testing of the system on three chosen football tournaments. The differences in way of labour pre and post the system have been analyzed and through interviews the value of these changes have been assessed. The results achieved in the thesis are as follows, the presented mobile web service does not only decrease the total work effort made by the tournament officials it also speeds up their work.

This thesis describes a further development of an existing prototype named Automatic pin bone remover. The further development was requested from the Swedish consulting firm ATM AB. The request of automatic pin bone removers is high and has the potential to be a worldwide leading product.The goal with the thesis work is to further develop an existing prototype. In order to achieve the goal a pre-study of the prototype had to be made in order to define a customer demand specification. The thesis work is then continued by a function analysis which differs from a conservative one.