Active sensors are used a lot in the society and industry, for example to gain better control over processes or to get proximity sensing features in different products. Within industry there is great interest in developing safe automation products that can be controlled with high accuracy but still at a low cost.The goal of this project is to develop a prototype of a non-contact rangefinder that measures distance using infrared light. The sensor is to be used for various applications in industries with relatively high accuracy and be compact, but at a low cost. By implementing a rangefinder into a product, more accurate detections of an object?s presence can be done.In this project a new distance sensor, EPC600 from ESPROS, was used.

When Vladimir Putin in the year 2000 came to power in Russia many believed that the Russian civil society were weak and had very little influence and with Putin people say that the situation have deteriorated. The purpose of this paper is to establish what kind of relationship exists between the Russian state and the civil society and to analyze this from a top-down perspective. We are looking at Russia during Putins first term in office from the year 2000 until 2004. In order to establish the relationship we have used John S. Dryzeks theory of inclusive and exclusive state and whether it?s active or passive in this process.

The efficiency of the harvesters work is more often reviewed, than the work of the forwarders. In a local Stora Enso office the differences between the harvesters reported volume of timber, and the actual volume delivered to the industry had been noticed. Therefore, the decision was made to do a review on the forwarders work. The review was conducted together with a worker from Vmf Qbera, who is working daily with wood measurement, in order to get a valid evaluation of the logs. Eight sites were included in the survey, and on each site 50 logs were marked. Approximately one third of the marked logs were pulpwood, and the remaining logs marked were timber.

The subject of this study is the ?work strategy? (arbetslinjen); the idea that work and active measures are preferred over cash benefits. The aim of the study is to investigate why the work strategy, which has been almost undisputed for nearly a century, has had widely changing contents over the years, what measures have been taken and which groups have been included. It also attempts to find out whether there is a correlation between unemployment rates, society and the different aspects of the work strategy. The study is conducted as an idea analysis, mainly of dissertations on the work strategy and public inquiries, and covers five time periods from the 1920?s until today.

The aim of this study is to investigate how new knowledge, discovered and translated by the archaeologist, is transferred to the public by examining the question posed to the archaeologist by ?la?nsstyrelsen,? the county administration office.Since there can be no mediation of knowledge without an understanding of its perception, I pay a visit to the cognitive sciences in order to answer what knowledge is and how it functions in regards to contract archaeological results.I argue that the current structure of mediation, in regards to archaeological knowledge, is in need of the same quality control that is demanded by the contractors in regards to standard archaeological procedures. When presenting archaeology to the public, consideration needs to be paid to the different targets groups of society. The importance of national directions rather than regional translations for mediation of archaeology is stressed by the author. This needs to be carried out through a change of the questions posed to the contracted archaeologists by the county administration in their ?fo?rfra?gningsunderlag,? the order specification for archaeological investigations. .

The aim of this study was to describe and scrutinise the position of the Swedish government on whether children should participate directly or through a representative in judicial proceedings.The main questions for this study were to find out (1) what position the Swedish government has on the subject, (2) how the position is justified, and (3) what view on children the position reflects.A qualitative design was used in the study and in order to describe the position a descriptive method was used. In the second part of the study a critical approach was used to examine and analyse the position.The main conclusions were that the position is ambiguous but that it mainly reflects, with a few exceptions, that it is better for children to be represented than to participate directly in judicial proceedings. The arguments that are given as basis for the position are short and lack both the objective and subjective grounds needed to decide the best interest of the child. The analysis of the position showed that it mainly reflects a view on children as objects and when the statement reflects a view on children as subjects, it relates to age and maturity in the child..

This study is about youths, democracy and school. It seeks to describe and problemize the school's role in the democratic society. Firstly, using Social Representations Theory, 44 upper secondary shool pupils? representations, or conceptions, of democracy are described and discussed. These representations are then analyzed in relation to the school's role in the democratic society, as it is described by different researchers.The results show that many of the youths have a rather simplistic and abstract view of democracy, describing it only in terms of general principles and the main features of the representative democracy, such as voting in national elections.

This report is an outcome of a master degree project at Linköpings University in co-operation with Micronic Laser Systems AB. The purpose with this master degree project was to investigate how to implement a receiver in a data transfer system. The system consists of several data channels, where every channel consists of three parts: driver, transmission lines and receiver. The driver send low amplitude differential signals via the transmission lines to the receiver that amplifies and converts it to a single-ended signal. The receiver has to be fast and be able to feed an output signal with high voltage swing.

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

AbstractCompanies in the Swedish process industry has for a long time spent a lot of capital in high-tech development, which have given them increased ability to compete with high quality and excellent technical knowledge, which has given them greater opportunities to grow on the market. But it?s not enough to achieve success with new products and service; it must also be consistent what market wants and preferably something exceptional. The purpose of this study was to determine the factors that are predominantly success factors and how they may affect the sales target of a new product, in this case Frövi White. Another objective of the study was to examine how Korsnäs Frövi communicates and transforms information as requests and demands from customers into refined material. To obtain relevant information to the study several interviews with respondents from most of the value chain in Korsnäs Frövi has been carry out.

In today?s fashion market there are a great number of actors that offer a huge selection ofproducts. The fashion world today covers the whole world and a result of this, the competitionamong fashion companies are enormous, leading to a tough climate for companies in today?sfashion industry. There is an overproduction of goods on the market and companies mustcompete for customers because of today's homogeneous goods and prices.

AbstractAuthors: Åsa Höjer, Karl WijkmarkTitle: The intercultural communicator. A study of cultures? influence on communication.Level: BA Thesis in Media and Communication StudiesLocation: University on KalmarLanguage: SwedishNumber of pages: 67Date of seminar: 2009-01-15Advisor: Jens CavallinKey words: Intercultural communication, culture, Hofstede´s cultural dimensions, anxiety and uncertainty, self-confidence, high and low context, verbal and nonverbal communication, Telenor, Pakistan, Scandinavia.Case company: TelenorPurpose: The purpose of this study is to investigate what cultural differences, regarding communication, that are present between Scandinavia and Pakistan. Furthermore the purpose is to illustrate which factors that are important for personnel working for Telenor, that are about to work in a foreign culture, in order to create effective intercultural communication.Methodology: The following study is a case study that has used a qualitative methodology with interviews conducted via e-mail. To be able to interpret and understand human experiences and situations a hermeneutical approach has been taken.

This thesis aims to examine how teachers who teach the Swedish subject, uses film in their education. The survey was given to 30 of these teachers in Nykoping, half which are working in junior high schools, and half which are working in high schools. One importantcondition to this works implementation, is the existence of the widen text concept that points to that all media is a concept that can be read and analysed. This is the attitude that The National Agency for Education aims at in different govern documents. The National Agency for education also request teachers to give the students tools to the media literacy that the society demands.

This study was performed to investigate the bacteriological quality of French cheeses made from raw milk. Fifty cheeses of this type were purchased from Swedish retail premises. The methods described by the Nordic Committee on Food Analysis (NMKL) were used to determine the number of Enterobacteriaceae, presumptive Escherichia coli, coagulase positive staphylococci and Listeria monocytogenes. In 32 cheeses (64%) the number of bacteria mentioned above exceeded the determined maximum value. Thirty samples (60%) showed high counts of Enterobacteriaceae.

This report discusses developing a software log tool for analysis of industrial processes. The target was to develop software that can help electro Engineers for monitor and fault finding in industrial processes. The tool is called PLS (Process log server), and is developed in Visual Studio.NET Framework 2005. PLS works as a client with Beijer Electronics OPC Server. The program is able to read data from PLC (Programmable Logic Controller), trough the OPC Server.