Sök:

Sökresultat:

1895 Uppsatser om Occupant load factor - Sida 15 av 127

Metodik för utmattningsberäkning av svets i vibrationsmiljö

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

Små barn behöver stor yta. Om inredningens roll i skapandet av en användarvänlig barnavdelning.

The aim of this study is to examine how important a factor the environment and the interior is to the creation of a user-friendly children?s library. In this study, environment is taken to mean the furnishing and the equipment in the children?s area at the library. The environment plays an important role in society today and because of that this is a current topic.

Direct-EGR tillämpat på HCCI

The Homogeneous Charge Compression Ignition (HCCI) engine is promising in terms of lowNOx, low particulates and high efficiency. Due to its homogeneous charge, where thecombustion starts almost simultaneously from a number of points in the combustion chamber,only lean mixtures are possible to burn because of the resulting rapid combustion, which is muchfaster than the combustion in an SI-engine or a diesel engine. When richer mixtures are used thecombustion will start earlier and also be more violent.To phase the combustion later and lower the combustion speed, external cooled EGR can beused. The EGR-system used in this thesis uses a divided exhaust channel where one channel andits corresponding valve are used only for transporting EGR back to the intake system.Consequently the EGR-valve is connected to the intake pressure. This system is called Direct-EGR (D-EGR).Engine tests verified that the CA50 indeed is phased later when cooled EGR is used.

Självgående fordon hos Sandvik do Brasil

At the plant of Sandvik do Brasil in São Paulo there is a need for improving the transport of inserts between the plant building and the stock building. The idea is to install a system with an Automated Guided Vehicle (AGV) to take care of this transportation. The purpose of this report is to present which demands there are on the system and to find the best solution according to the demands.To conclude this work a study was made of the plant and the AGV technology was examined. Several providers of AGV solutions were contacted to get information about prices and detailed solutions.The conclusion was that the most suitable system for this application is a small unit load vehicle using inductive wire as guiding system..

 Den första inblicken i regionala företagarföreningar :  En fallstudie av Örebro Promotion

Many studies have been conducted of different types of business networks in recent years. Despite this, there is a lack of research concerning industry-transcending formal networks which are limited to a specific region. We have conducted a case study of Örebro Promotion, which is an industry-transcending network including over 500 members. Örebro is a medium-sized city in the middle of Sweden. The purpose with our study is to create an understanding of why enterprises choose to be a part of the network and what they feel is the gain of their membership.

Variationer i kostnader för specialiserad sjukvård - En analys av demografi, socioekonomi och hälsans inverkan på kostnaderna för specialistvård i Västra Götalandsregionen

Abstract. Aim: The aim of this study is to determine certain health, demographic and socioeconomic factors that affect the costs for specialized health care between the municipalities within the Västra Götaland region. Method: The method is explorative and analytical. The costs for specialized health care was divided into three different subgroups; independent somatic specialized health care, specialized health care provided by private practices or outside the region and psychiatric specialized health care. The data was age-standardized.

Lastfördelning och effektmätning med Arduino och PLC

Detta arbete var beställt av Sjöfartshögskolan i Kalmar. Skolan ville ha en enhet som kunde mäta aktiv-, reaktiv- och skenbar effekt, ström, spänning, frekvens och cos? på en generator och som kommunicerade vidare dessa värden till en PLC. Detta för att kunna lastfördela lasten mellan ett antal generatorer i kursen Tillämpad elteknik 15 hp där studenterna bygger en generatorinstallation med tre generatorer. Ett funktionsblock för lastfördelning skulle också programmeras.

JB-TOTALSONDERING : Jämförande sonderingar och utvärdering av egenskaper i isälvsavlagringar kring Igelstaviken

The main purpose of this thesis has been to find a way to evaluate the soil parameters for the Total sounding method (TS), such as the inner friction angles and settlement modules. This study only includes an analysis of soil profiles from the Stockholm region. The chosen location for the study is a proposed residential area east of Igelstaviken in Södertälje. Presently, the subject plot is located in a residential area and is also adjacent to a school area.Total sounding is originally a Norwegian soil testing method. The differences between the sounding methods (weight-, ram-, CPT-sounding) are for instance how the sound is driven into the ground and what kind of parameters that are registered.

Lågoffsetkomparator

Detecting small signals with a comparator demands that the total voltage offset is lower than the actual signal. The total offset includes the voltage offset in the comparator and the voltage offset that is created by the offset currents that flows thru the load at the comparators input. The goal with this comparator that has been developed has been that it will have a total voltage offset at maximum 500 uV. The comparator does not need to be extremely fast or does not need to operate in a big frequency area. To have all the flexibility that is needed a full custom technique is used.

GIS och statistik vid dräneringsområdesvis kväveläckagebeskrivning i Halland

The last decades have shown increased nitrogen leeching from soil to water recipients. This is inSweden mainly due to over-manuring of agriculture land, effectivization of drainage systems and thedeclining extent of wetlands. The accumulated amount of nitrogen in water doesn?t only make itunsuitable for use by humans and cattle, but also decreases the biological diversity as well as negativelyaffect tourism and fish industry. In the most severe cases shallow maritime grounds can be completelydepleted of oxygen due to decomposition of the increased amount algae and plankton growth.This study have the aim to describe and quantify the nitrogen leeching from the Genevad drainagebasin, located in southern Halland, Sweden.

Pedagogisk dokumentation : Förskollärares attityder till pedagogisk dokumentation i förskolan och ramfaktorers påverkan

In the Swedish Curriculum (Lpfö 1998, revised 2010) pedagogogical documentation constitute a big part. It is important that the childrens development and learning are documentated properly, both for the child itself, but also as an quality review and evaluation of the work that is made at the Preschool.In this study we have examined preschool teacher?s attitudes towards pedagogical documentation and how they work with it and use it in the daily work at the Preschool.We have also examined their own abilities to implement pedagogical documentation. For whom is the documentation made for? We also wanted to see if the children had any opportunity to influence the work.We have used a qualitative method and our study is based on six semi-structured interviews with six preschool teachers.

Arbetshälsa en helhet - En kvalitativ studie om delaktighet

Background/Literature: Workplace environment has a significant influence on the livelihood of many in today?s world. In Sweden one million employees feel the effects of ill-health due to a dissatisfactory workplace environment. Consequently there has been a recent focus on the promotion of health in the workplace with an emphasis on physical activities. However scientific research has shown that psychological and social aspects need to be addressed in addition to the physical aspects.

Aktivering av en dissolvingmassa med enzymer före en konventionell viskosprocess

In conventional viscose manufacturing, a large amount of carbondisulfide is consumed. This amount has to be decreased to keep the production cost down and to reduce the environmental impact. The purpose with this work was to show if an enzyme treatment of a dissolving pulp could increase the degree of substitution in the viscose so that the amount of carbon disulfide consumed in the process could be decreased. Previous investigations by Kvarnlöf (2007), Engström et.al. (2006) and Henriksson et.al.

UTVECKLA OCH ANALYSERA INSTRUKTIONER MED COGNITIVE LOAD THEORY: ANIMATION VS STATISKA BILDER

Undersökningen ämnade se vilka fördelar och nackdelar som finns med animerade instruktioner jämfört med bildinstruktioner. För att göra detta så fick ett antal personer testa att vika origami med hjälp av antingen bildinstruktioner eller animerade instruktioner. Resultatet baserades på aspekterna tid, resultat samt utveckling. Undersökningen visade att animerade instruktioner hade mycket högre läsbarhet än bildinstruktioner men att det var svårt att se huruvida personer blev bättre på att vika origami..

Investigation of tissue factor mRNA levels in human platelets using real-time PCR

Tissue factor (TF), a 47 kDa glycoprotein, is the initiator of the extrinsic pathway of blood coagulation and consequently of the upmost importance when damage to blood vessel occurs. The source of TF in circulation has been investigated. However, the source of TF is still not clear. One theory is that platelets express and increases the expression of TF after stimulation and the aim of our report was to investigate whether platelets really are a source for TF in circulation.Using specific primers for TF mRNA, platelets in plasma from healthy volunteers and from patients suffering from cardiac infarction were analyzed by using real-time polymerase chain reaction (PCR). Gel electrophoresis was performed after amplification of TF mRNA to verify the results.The samples were negative for TF when using real-time PCR and the few positive all had cycle threshold (Ct) values above 35.

<- Föregående sida 15 Nästa sida ->