This thesis work aims to describe the prerequisites for a distributed treatment platform for real-time sharing of rounds performed by paediatric oncologists. The work started during the autumn 2004 and is directly aimed at improving the situation for the thirty or so specialist treating children with cancer. The work is not limited to the description of such a platform but also to select suitable software and hardware for the implementation of the platform and further more to coordinate the implementation. The production of several documents describing the platform is also part of this work. The work successfully led to the implementation of such a platform as described in the published article Barnradioterapi på distans Kristenssen et.

This thesis has been a part of Forsmarks Kraftgrupp AB's evaluation of a turbulencemodel used in simulation of turbulent flow called PRNS (Partially Resolved NumericalSimulation). This model has promising properties and may be of use in savingcomputational resources. The purpose of this thesis was to analyze this model andcompare it with industrially applied models such as k-omega SST and LES (Large EddySimulations).PRNS works as a hybrid of the k-omega SST and DNS (Direct Numerical Simulation)where a constant, RCP (Resolution Control Parameter) with a value between 0 and 1are selected. This constant is then used in the calculations and determines thebehavior of the simulation. When RCP is set to zero the equation are the same as fora DNS simulation and when RCP is set to one the equations for k-omega SST issolved.

Title:Chillchain for cut flowers ? how the distribution works.Author:Anna-Maja Svarén, student at Lund Institute of Technology, mechanical engineering.Supervisors:Annika Olsson, Department of Design Sciences.Bengt Sahlberg, Bioett AB.Problem:How does the distribution of cut flower works regarding temperature, losses, responsibility, complaints, packaging and weak points?Purpose:The purpose is to map the distribution of cut flowers, with focus on losses in the temperature, from farm to store. The goal is to identify weak points in the chillchain and to se how wrong temperatures affect the flowers. The results can be a help to secure the chillchain.Method:The work started with a problem; map the distribution of cut flowers with focus on temperature losses. Data was collected on the basis of this problem, then analysed, and finally conclusions were drawn.Conclusions:The affect handling and distribution has on a cut flower is very complex.

Today?s society is one where technological advances are made daily, which increases the need to stop and assess the risks against users? integrity when integrating new technology in contemporary systems all the greater. We have taken two technologies, Near Field Communication and Certified Wireless USB, whose envisioned area of use is to be integrated into mobile phones, and evaluated what security threats are revealed for the respective technologies. The threats against security have been identified through research of the standards and existing reports for each technology. Practical experiments have not been conducted on account of us not having access to any equipment to run such trials.

The division of Engineering Materials at Linköping University, department of Management and Engineering, conducted a research project concerning Fatigue life of thermal barrier coatings during 2009. During this project equipment to provoke these fatigue failure by rapidly heating and cooling test subjects in cycles, was ordered.Design and manufacturing of the equipment was handled internally at LIU.The equipment was built using a furnace that is lowered and raised over the table where the test subject is placed. To keep the temperature of the furnace a lid slides in place to close the downward facing opening of the furnace when it is in the raised position. On this door there is nozzle that is used to cooling of the test subject by air.To make sure that the equipment can work independently you need an automation controller that can evaluate if movement can occur without danger of collisions. The control system also needs to monitor that all elements are performed according to plan.This degree project is based on a modular system from OPTO 22 and includes the configuration of a PLC that will be supplied with logic and a user interface.The degree project resulted in a graphic interface in which a user can set desired values for different parameters and get information about current values for them.

Uppdraget som gavs av Brimer VA Produktion AB i Osby var att ?föra fram deras nya vattenledningssystem i ljuset?, göra en FEM-beräkning på en detalj i systemet och ta fram en ekonomisk samt teknisk jämförelse mot det traditionella vattenledningssystemet. Bästa lösningen på uppgiften var att visualisera vattenledningssystemet med hjälp av animerade filmer. Detta med tanke på att visualisering har ingått till stor del i utbildningen Virtuell Produktutveckling & Design..

Lawson Software, ett dotterbolag till Infor, är ett företag med mer än 4000 anställda i 40 länder. De levererar affärsystemlösningar och tjänster till företag inom hälsovård, tillverkning, distribution, underhåll och service.Grundsystemet i Lawsons affärssystem består av en mängd mindre applikationer som körs mot ett egenutvecklat system. Vad jag ska göra är att undersöka möjligheten att övervaka dessa applikationer genom en smartphone och bygga en prototyp för övervakningen i Java, för Android.Applikationen mottogs positivt av Lawson och det finns redan planer på vidare utveckling av den efter exjobbets avslut..

Grunden för examensarbetet är den tävling om nytt stadsbibliotek i Stockholm som Stockholms stad utlyste 2006. Det nuvarande stadsbiblioteket från 1928, ritat av Erik Gunnar Asplund, är en av Sveriges mest kända byggnader. Uppgiften har varit att rita en tillbyggnad som kan bilda en helhet tillsammans med det nuvarande biblioteket. Det har handlat om att först värdera det som finns idag och sedan tillföra något för framtiden..

The purpose of this thesis was to examine why so many CRM-projects didn`t reach the expected goals that companies management envisaged. The purpose was divided into two research questions. ? How should companies? management design the strategic projection of the CRM implementation? ? How will employees? attitude to changes influence the result of the CRM implementation? The case company was a Swedish technical consulting company: interviews were conducted with two represents from two different departments. The findings of the study were that management often strongly believes that software will sort out most of the upcoming problems and forget the factor that education of employees is at least equal important.

The market for biofuels from the forests have had a positive development and the job initiators for this master´s thesis wanted to examine the profitability of a method for harvesting forest fuel, which was unfamiliar to them. The method was the ?long tree tops-method?, here called the LT-method. The LT-method is characterised by the fact that timber is harvested as the only roundwood assortment while the rest of the stem, which in other cases would become pulpwood, is harvested as forest fuel together with the logging residues. The method is based on the assumption that advantages in handling of the forest fuel assortment such as increased load weights for forest hauling and truck transportation, should compensate for the lower price for pulpwood when sold as forest fuel. The aim of the study was to compare the profitability of the LT-method with the GROT-method (harvest of timber, pulpwood and logging residues) and conventional logging without any harvest of forest fuel, and aslo to try to identify factors affecting the profitability of the different methods.

An Android-application that is intended to be used during airsoftgames (a gamesimilar to paintball) has been developed. In this application, which is called TactiX,players can join different teams and see their team members on a map. Through theapplication players can interact with one another in a variety of ways. They can send text messages, give orders and send drawings to each other. Players can also make observations of enemy players on the map.

The idea for the thesis ?Construction and implementation of a mobile prototype; The Lovebomb? originates from doctoral candidates Rebecca Hansson and Tobias Skog from PLAY Research Group at the Interactive Institute in Gothenburg. The object of the master thesis is to construct two working LoveBomb prototypes, one mother console belonging to the LoveBomb and blueprints for both. The LoveBomb (the picture to the right shows a possible design) is intended to encourage people to express themselves emotionally when situated amongst strangers in public spaces. Two buttons control the device, which contains a radio transceiver.

Inspired by Kitaro Nishida?s concept of pure experience this thesis analyses Bergson?s concept of experience with the intention of showing how experience is related to duration and how this in turn destabilizes certain tendencies towards subjectivism that can be found in Bergson?s work. This is accomplished through a reading of Matter and memory, Creative Evolution and Introduction to metaphysics that tries to desintegrate both subject and object in favor of duration. The thesis arrives at describing the combination of duration and non-subjective and supra-individual experience as a polyrhythmic movement..

Inspired by Kitaro Nishida?s concept of pure experience this thesis analyses Bergson?s concept of experience with the intention of showing how experience is related to duration and how this in turn destabilizes certain tendencies towards subjectivism that can be found in Bergson?s work. This is accomplished through a reading of Matter and memory, Creative Evolution and Introduction to metaphysics that tries to desintegrate both subject and object in favor of duration. The thesis arrives at describing the combination of duration and non-subjective and supra-individual experience as a polyrhythmic movement..

Denna rapport beskriver utvecklingsprocessen av en programvara som jag har skapat för ett företag inom livsmedelsindustrin. Detta företag har tillverkat en ny produktgren och krävde ett verktyg för administrering av allt från produktion till leveranser. Då den befintliga programvaran inte var lämpad för denna uppgift, utvecklades en skräddarsydd lösning för just detta ändamål och med hänsyn till företagets kompetens och utrustning. Den som läser denna rapport bör ha grundläggande förståelse för programutveckling samt programmeringsspråket C#..