Increased competition in the IT industry has sparked a need for developing faster innovation processes with more predictable output. One of the biggest issues when it comes to achieving a faster flow through the innovation process lies in managing its high degree of variation. Proposing a solution to this problem, Lean Software Development (LSD), was developed to provide a framework for how IT companies should organize its software development process to achieve increased speed and quality. This study examines to which extent LSD, as a set of values, principles, methods and tools, can be used to improve flow efficiency in the innovation process. A case study of a multinational IT company was made by conducting ten semi-structured interviews with current employees.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

At the Department of Technology and Built environment at the University of Gävle there was an interest to study GNU Radio, which is an "open source radio project. The project is based on that most of the radio signal processing is made in an ordinary PC. The idea behind this degree project was that in a laptop there are several radio transmitters/receivers that takes space, generates heat and transmit in varied frequency band etcetera. All these radio transmitters/receivers could be replaced with a Software Defined Radio system. It means that one common, general radio hardware is used to different communications such as: WLAN, Bluetooth, GPRS, 3G etcetera. The waveform is generated in the software, which makes the system very flexible.

AbstractTitel: Hjälpen till ett drogfritt liv- En kvalitativ studie om återfall och återfallsprevention.Writers: Jonna Håkansson och Louise Hag.Keywords: Abuse, addiction, relapse, relapse prevention.   Abuse is a major problem and leads to negative consequences for the individual, such as illness, criminality and death. It?s also a big problem in the society, because the most common crimes are drug-related and the consequences lead to high economic costs. In order to overcome an addiction, treatment is often required.

Marknaden för mobila system har utvecklats enormt snabbt de senaste åren. Idag är det ett område med en allt större omsättning och det har vuxit fram som en helt ny gren inom Software Engineering. Utvecklare av mobila applikationer står ständigt inför en utmaning när det gäller att välja vilket mobilt system man ska satsa på när man utvecklar applikationer. Valet av system kan vara helt avgörande för om man hittar rätt målgrupp av konsumenter och därmed kan generera tillräckligt med omsättning för att driva lönsam utveckling av applikationer. Det räcker inte att enbart kolla på vilket system som har mest användare eller vilket system som genererar mest omsättning, utan man bör noggrant överväga de förhållande som gäller för just den applikation som ska utvecklas.

This report explains the need to develop a configuration manager that handles transmission equipment which exists in the Swedish Defence telecommunications network. The configuration module will display the configurations and compatibility among the equipment and their software which are all part of the network.Also included in this report are tools, methods and results for the development of a prototype for the configuration manager. The prototype consists fundamentally of a database assisted by a user friendly website.The transmission equipment handles a lot of important transmission of information and is in the hands of a department of SAAB, OFGCA, by orders from the Swedish Defence Materiel Administration (FMV). Within the work included in this order exists a continuous update of both software and hardware which the equipment consists of. Therefore it?s highly important that there is a monitoring of which of the software and hardware is compatible with one another, ensuring that the functions of the system work properly.The consistent updating has resulted in compatibility issues between components and because of this, a need for a configuration manager has arisen..

The majority of free content on the internet is financed by online advertising. A requirement for thismodel to work is that the visitors see the ads. The emergence of ad-blocking software has shifted thepower from the advertiser?s choice of publishing ads to the consumer?s choice of viewing ads. Weexamine the consumers? opinions regarding the use of ad-blocking software and compare them to theopinions of companies using online advertisement.

The report handles the transmission of signals from piezoresistive pressuresensors and thermocouple from a rotating object. This report also evaluates the possibility to collect data in a datalogger that rotates with the object. Telemetrics was previously used for signaltransmission in Finspång, therefore there has been no tests considering preassure measuring. One transmitting method handled in this report is transmission through a slipring connection. One test with a slipring connection was performed for transmitting signals from a piezoresistive preassuresensor.

Opcon Powerbox is a product developed by Opcon together with the underlying company SRM (Svenska Rotor Maskiner) where surplus heat from the industry is used through an Organic Rankine Cycle (ORC)?process to produce electricity. An ORC-process is a thermodynamic circle process in which a refrigerant is used as the working fluid. The refrigerant makes it possible for the circle process to operate at lower temperatures than the conventional Rankine process.In this master?s thesis a data analysis software for the Opcon Powerbox has been developed in which measurement data is retrieved and handled from the Opcon Powerbox.

Radio frequency identification (RFID) is a versatile wireless technology usedworldwide. The fields of applications are many and its popularity constantlygrows due to smaller in size, better and less expensive components. RFID isused to identify, track or share information about an object using radio waves.This master thesis describes the process of designing and implementing ahandheld UHF RFID reader. The goal was to, based on a UHF RFID-chipdesign a fully functional, small in size and power efficient device. Amicrocontroller provides the user interface and is also used to control theRFID-chip and a Bluetooth device.

Övergången från CATIA V4 till CATIA V5 innebär nya möjligheter för konstruktörerna på Scania att arbeta med Knowledge Based Engineering, KBE, för att effektivisera och kvalitets-säkra sitt arbete. Då CATIA V5 är en ny plattform som innehåller verktyg med samlingsnamnet knowledgware, för att bygga in kunskap i modeller ville Scania undersöka potentialen i att arbeta med KBE, och hur detta skulle kunna ske på Scania. Vid traditionell produktutveckling tas en helt ny artikel fram vid behov och ofta innebär detta att arbete som tidigare utförts, görs om igen. Syftet med arbetet är därför att undersöka huruvida KBE i CATIA V5 kan erbjuda möjligheter att återanvända kunskap från tidigare arbete och samtidigt kvalitetssäkra denna, samt utreda vilka knowledgewarelicenser som i så fall kan vara lämpliga för Scania.För att göra detta har en litteraturstudie genomförts för att undersöka vad som har gjorts inom området, och även en intervjustudie har utförts inom R&D på Scania. Vidare har sakkunniga på Linköpings Universitet och Tekniska Högskolan i Jönköping intervjuats.

The exclusion of visually impaired from the information flow presented to us through signs was what led me into this project. With a growing amount of information being presented to us on signs and digital information surface the need of communicating this information in a way that could be read by visually impaired is evident. Looking into different ways of communication, my goal was to create something that filled the need of the visually impaired without branding them as disabled. Having a close relative with bad eyesight is became evident on how much it limited her in her everyday life, not being able to navigate herself without the support of her husband. Through interviews with her and others with varying diagnoses I reached an insight in their situation. To my surprise they still favored a visual form of communication before an auditory or tactile form, because it?s easy to survey and quick to interpret.

This study deals with integration between core subjects and character subjects on the upper secondary schools Electrical Engineering Programme. The purpose is to investigate how four teachers define subject integration, which the advantages and disadvantages are according to them and what the purpose is whit integrate the core subjects and the character subjects.The finding in this study highlighted that between themselves the teachers had different definitions of subject integration. In order to start up with a integrated working model the teachers had to come up whit a mutual definition of subject integration..

Open source is growing outside the boundaries of hackers, amateurs and software development, creating a humongous potential in many different areas and aspects of society. The intrinsic and extrinsic motivations that drives open source have been in the subject of much research recently, but how they affect each other when paid and unpaid contributors come together is still hidden in obscurity. In this study I investigate how intrinsic and extrinsic motivation correlates with each other and how those correlations affect paid and unpaid open source software contributors. The literature synthesis is based on of systematic reviews through searches in library databases, identification of articles by searching on the Internet and by reading relevant books. My results indicate that intrinsic and extrinsic motivations continuously affect each other and that paid contributors are more vulnerable since their extrinsic motivation in terms of money is reached only when many other motivations are fulfilled.

The earmould acoustics affect the amplification that the hearing aid is programmed to give to its user. It is therefore important that the choices made for the earmould are correctly done. One choice is regarding the shape of the soundbore that affects the frequency response of the hearing aid above a certain cut-off frequency. The purpose of this project was to measure the frequency response when altering the shape of the soundbore in the earmould. Additionally, the aim was to examine how the frequency response is affected when the shape of the soundbore is not set or is not possible to set in the software when programming the hearing aid.