This master thesis is a part of the DySCAS project at ENEA. The purpose of this thesisproject is to add support for streaming media and USB support to the DySCAS demonstratorplatform.To achieve this, some of the widely used middlewares available today were studied. The onethat proved to be of most interest is CORBA. Although CORBA?s solution to streamingmedia couldn?t be used due to their use of object programming, the CORBA solution didprovide some interesting thoughts regarding how the USB devices should be handled, in thiscase their ?resource inspector? and ?trading service?.Ethernet was the chosen network to support streaming media.

Sitka spruce (Picea sitchensis) is not considered to be a native species to Swedish forests. It´s origin is the pacific coast of Northern America, an area that is dominated by a coastal climate which makes it likely to believe that it would be well suited for growing in the south-west of Sweden. This study aims to investigate the gain in production that can be reached by growing sitka spruce instead of Norway spruce (Picea abies) in the county of Halland. A regression model based on data from forest experiments was produced to explain the gain in production. This model was based on elevation and annual precipitation. The model was then used to create a map layer in arcGIS that shows the gain of volume in comparison to Norway spruce in percent. An analysis was carried out to find what share of the forestland in Halland county that fell into four different classes of production gain.

The essay depicts the opposite views of the director and an actor during the filming of a specific scene in a feature film. The actor feels that he is not being listened to. This leads to unforeseen consequences for the director, as the actor no longer wishes to take part in the marketing of the film prior to its opening night. Everything is seen from the director?s point of view, she is working in a film world dominated by men.Questions are being asked if the director?s instructions are clear enough or if the actor, fearing getting lost, is mixing up his own feelings with those of the character he is portraying? What happens to the collaboration and how does it affect the rest of the team and the completion of the production? The director is also the producer.

This report describes the design and implementation of a multi-master, packet based protocol for small and tiny microcontrollers where resources are limited. The protocol was named "Tiny Controller Network" or TCN for short. The protocol is meant mainly as a control bus for automation and sensor acquisition applications but due to its flexibility can also be used for other purposes as well. It borrows some of its functionality and design ideas from the well known CAN bus and Modbus but also has a number of major differences like the use of standard hardware and time synchronisation. One of the key aspects during the design was the use of very little system resources and common on-chip hardware peripherals like a UART.

AbstractConsider a ?uid being heated from below. The heating leads to an upward convectiveforce that is counteracted by the viscous forces of the ?uid. If the convectiveforce is large enough in comparison to the viscous forces the ?uid will be put in anunstable state.

The essay depicts the opposite views of the director and an actor during the filming of a specific scene in a feature film. The actor feels that he is not being listened to. This leads to unforeseen consequences for the director, as the actor no longer wishes to take part in the marketing of the film prior to its opening night. Everything is seen from the director?s point of view, she is working in a film world dominated by men.Questions are being asked if the director?s instructions are clear enough or if the actor, fearing getting lost, is mixing up his own feelings with those of the character he is portraying? What happens to the collaboration and how does it affect the rest of the team and the completion of the production? The director is also the producer.

AbstractConsider a ?uid being heated from below. The heating leads to an upward convectiveforce that is counteracted by the viscous forces of the ?uid. If the convectiveforce is large enough in comparison to the viscous forces the ?uid will be put in anunstable state.

The primary function of a mixer is to keep a fluid in constant motion. All mixing applicationsrequire varying degrees of small-scale turbulence and bulk flow. The performance of asubmersible mixer is measured by the thrust that it produces, while the strength of the bulkflow is dependent on the total amount of installed thrust.In a mixer, the fluid quickly flows past the propeller, and as a result, the current is mainlyaxial. The fluid will also obtain a rotating velocity, or a swirl, though this is significantly lessthan that of the propeller. During the process, the total amount of energy increases in the formof static pressure and kinetic energy.

This study presents results for observing forest changes in Sweden using multi-temporal L-band satellite data and is a part of the JAXA?s ALOS Kyoto and Carbon Initiative. An extensive dataset of images acquired by the Advanced Land Observing Satellite Phased Array type L-band Synthetic Aperture Radar (ALOS PALSAR) is investigated for clear-cut detection in boreal forests in northern Sweden (Lat. 64°14? N, Long.

Product development is a risky business; many products never yield profit, but it is also ne-cessary for a company?s survival in a competitive business where the costumers change their requests constantly. Consumer-led product development is developed from the wish to fill the consumer?s needs and expectations and thereby be more likely to succeed. Lindell?s Gårdsslakteri AB is a local slaughter and meat processor in Västergötland.

This report is focusing upon relining from a client?s point of view. Potential buyers are given a presentation of the different methods available today together with a general briefing describing the process. An important part of this report are the interviews that took place with already established customers. Property owners, managers, pipe cleaners, and project managers whom all been in contact with relining have answered the questions given along with their own thoughts and have also given recommendations of other persons to talk to.

The aim of this study was to examine the current and historic mercury(Hg) load of the lake Storjuktan due to its recent exposure to a local potential source of Hg in form of the Sulphide mine Blaikengruvan(2006) and an earlier potential sources of Hg-load, the damming of the lake(1960s). Sediments were extracted using a HTH-sampler, freeze-dried, and analyzed for tot-Hg, LOI and activity of 210Pb and compared to samples extracted prior to the opening of the mine(2006). Constant initial concentration (CIC)-dating model was used for dating the samples. Low levels of Hg (100ng/g) were found throughout the lakes sediment. The highest levels of Hg(220ng/g) was detected at a depth of 4-5cm dating back to the mid 1970:s, suggesting that increased levels of atmospheric Hg rather than damming of the lake has caused the increase of Hg.

The metal mining history goes thousands of years back. The downside of the mining industry is the large amount of tailings created during the mining operations. Drainage and leaching of heavy metals from these tailings may cause major environmental problems including acid mine drainage and leaching of heavy metals. This study examines a pond located near an old mining site, where part of the old mining facility has been recently (1990) restored. The objective was to assess eventual metal contamination from historical mining and the recently performed restoration using a sediment core as a natural archive of historical metal inputs to the pond.

Jönköping Energi AB (JEAB) is a local energy supplier for the county of Jönköping. JEAB also maintain the local Metropolitan Area Network (MAN). They have recently installed GPON in a portion of their network and have connected it to the MAN via an Extreme switch.However JEAB would prefer to use Cisco equipment instead of Extreme since the MAN comprises of Cisco hardware. They require a solution to connect GPON to the MAN with a recently purchased line card (Cisco 7600 ES20) which can be installed in a Cisco 6500 Catalyst switch. There is also a possible solution with an Alcatel-Lucent 7450 ESS-1 switch.

I was assigned to the thesis as part of a project GMA AB (Ground Machinery Applications AB) is running. The project aims to develop a new method for injection of drilled holes in rock walls. Currently, the injections usually involve cement but the basic idea of the project is to replace cement with a supplement called Silica sol.Silica sol is known as a gelling liquid. The gel time is controlled by a mixing of saline. Depending on the amount saline that gets mixed in, the gel time varies.