This report treats a Master Thesis performed at Scania CV AB. The task was to create a computer model of a hydraulic actuator system in the software AVL Hydsim. The system consists of two spring-loaded masses with surrounding hydraulic components. The purpose of the model is to study phenomenon and problems in the system, as well as to be a support in the development of the system. It is not supposed to be used to study absolute values in its current form.

The impact of computer programs in safety-critical systems has increased in the past decades and computer-based systems can now be found in a wide range of applications. A new approach for developing dependable systems is documenting all design rationale that affects safety using Intent Specifications. A recent approach for developing complex systems efficiently and in an upgradeable manner is Component-Based System Engineering. In this thesis, these approaches are combined in the development and upgrade of a Remote Robot Control Unit by using the tool SpecTRM. The case study showed that Intent Specifications and CBSE could successfully be combined.

When protection zones for wells are delineated, it is important to acquire good knowledge about possible travel time from different points in the catchment area to the well. Often, simple analytical methods are used for estimating travel times and the assumption is made that the hydraulic conductivity is relatively homogenous within the aquifer. Nevertheless, many aquifers are strongly heterogeneous which may lead to differences between estimates and actual travel times. As a part of the process to develop improved methods for delineating protection zones for groundwater supply wells, a tracer experiment was performed in a glaciofluvial esker formation in Järlåsa. On the basis of the experiment, a numerical flow model was created for the test site.The purpose of this master?s thesis was to apply the flow model to an aquifer where the hydraulic conductivity shows great variability and should be described by a stochastic distribution.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

In this essay we strive to examine how the social work in Sweden will be affected if the Swedish welfare model goes through fundamental changes. The study illuminates the close connection between the Swedish collective bargaining model and the Swedish welfare system. The questions we present in this essay, and hopefully answer satisfactory, are: is the Swedish welfare model subject to thorough changes? How will such a change alter the social work in Sweden?, is the Swedish collective bargaining model in a state of modification? Would a modification in the collective bargaining model have effects on the Swedish welfare model?We have used a qualitative method in collecting empirical material. We interviewed three representatives, who worked for Confederation of Swedish Enterprise, IF Metall and The Swedish Municipal Workers respectively.

In this master thesis work, a new method called MultiScat, is compared with the conventional method with alfa-correction, for computing concentrations from intensities in X-ray spectrometric analysis. The conventional model is a linear model, which only takes the photoelectric effect into consideration. It doesn't consider Rayleigh and Compton scattering even though it has a great impact on the measured intensities. Here MultiScat differs a lot. MultiScat is based on a solution of the Boltzmann transport equation.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

AbstractThe purpose of this study is to find out how pupils give expression of a water cycle model and if the model causes any misunderstanding. Two problems constitute the starting point for this investigation. The first question is: how do the pupils explain the water cycle with the help of the jar model (can of glass). The other question is: can the children see any similarities between the can of glass and our earth. Qualitative semi structured interviews with seven pupils in the ages of 8-9 have been used to show the pupils? own thoughts and how they express them.

We have by Statistics Sweden (SCB) been given the task of using different dynamic regression models in order to forecast service price index for sea transport. The aim is to see whether these models provide better forecasts than those previously used. This essay aim to identify, estimate and evaluate the selected prediction models. Through our data material we were given access to 28 sightings of sea transport index during the period of 2004 q1 to 2010 q4. We have chosen to evaluate three different transfer function models, one ARIMA model and one naive forecasting model. The input variables we decided to test in our transfer function models were the price of petroleum products, the port activity in Swedish ports and the lending rate of Swedish Central bank. The results of our study suggest that transfer function models generally provide better models than the ARIMA model and the naive forecast model.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

The purpose of this thesis has been to build a parameterized model of a prototype motor in the program Solidworks, to use in future optimization of aspects of effectiveness and weight. The result were two models. The first model were one minor part of the whole design in 2D, to be able to optimize and study the minor part with a faster loss simulation. The second model was the whole design in 3D. The whole model were done with the three programs Solidworks, Comsol and Matlab.

Sydkraft Vattenkraft AB owns and operates the Traryd hydropower plant, located in the river Lagan in the southern part of Sweden. The gravity dam is classed according to RIDAS guidelines (Hydropower Industry Dam Safety Guidelines) as a class 1B dam. This means that the dam must discharge a class 1-flow which has a return period of 10 000 years. The inflow into the dam has been calculated in an earlier report to 495 m3/s, with a waterline at an elevation of 126, 3 meters above sea level. The gravity dam has a discharge system with two rectangular weirs, which results in a smaller discharge than the necessary 495 m3/s.

Background: In 1998 it was stated that Swedish municipalities would report the pension liabilities according to the mixed model where the pension liabilities before 1998 was moved from the balance sheet. The mixed model has been criticized by economists for not showing the total pension liabilities. To remove some of the liabilities in the municipalities balance sheets means that the solvency improves. Some municipalities have decided to go against the municipal accounting law and recognize all of the pension liability as a liability according to the full funding model. When two accounting models are being used the comparison of the municipalities' financial statements is much harder.Purpose: The main purpose of this study was to study the reason why some municipalities apply full funding model rather than the mixed model.

The purpose of our essay is to examine if variation exists in the way that auditors try their independence, this so called analysis-model. We will suggest some factors that influence the way auditors practise the analysis-model. The institutional theory predicts no differencies since the normative pressure could be expected to be severe. But we found that among other things people?s qualifications, personalities and audit firm?s size and age influence the way auditors try their independence.