The district heating load is seasonally dependent, with a low load during periods of high ambient temperature. Thermal energy storage (TES) has the potential to shift heating loads from winter to summer, thus reducing cost and environmental impact of District Heat production. In this study, a concept of high temperature borehole thermal energy storage (HT-BTES) together with a pellet heating plant for temperature boost, is presented and evaluated by its technical limitations, its ability to supply heat, its function within the district heating system, as well as its environmental impact and economic viability in Gothenburg, Sweden, a city with access to high quantities of waste heat.The concept has proven potentially environmentally friendly and potentially profitable if its design is balanced to achieve a good enough supply temperature from the HT-BTES. The size of the heat storage, the distance between boreholes and low borehole thermal resistance are key parameters to achieve high temperature. Profitability increases if a location with lower temperature demand, as well as risk of future shortage of supply, can be met.

The objective of this thesis is to make a training material for KSU, which shows how radiation affects the different electronic components in a radiological environment.All electronic systems in the presence of high ionizing radiation can experience difficulties and be destroyed.This influence may compromise the control system and thus the safety of a nuclear reactor plant.To achieve this objective requires a description of electronic components and sensors, to better understand its function.This thesis will also show the possible solutions available that the author found interesting.Organizations such as NASA, CERN and ESA have worked to develop electronic components immune to radiation. Those organizations have also developed a test protocol that guarantees to a certain extent the security of electronic components in a radiological environment.Since we know how the material reacts with the radiation, it could develop a material that can be resistant to radiation or like CMOS technology has proposed, to reduce the component to avoid the storage of charge in the oxide.Another solution can be the GRAPHENE. Its features will revolutionize the electronics and provide answer to the radiation problems, Graphene will replace Silicium and the electronic components will only have a few nanometers dimensions so the oxide area also reduces, and in this way avoid the known problem of storage of charge..

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

To create multifunctional buffer strips along a watercourse in an economically sustainable way requires consideration of many different factors. In this plan we have selected pollutant reduction as the main purpose of the buffer strip. We have also strived to achieve minimal income loss due to reduced production, increased biological diversity, good game preservation that leads to higher income from hunting, aesthetical satisfaction and possibility to profit from available subsidies. This is done mainly to make landowners/farmers more interested in creating buffer strips along water courses.As sand is the dominant type of soil in the area, the water course is less affected by surface runoff compared to if the soil would be clay or some other finer texture. Game preservation and subsidies have therefore been the main factors when establishing the width of the strip, because these require wider buffer strips in some cases.

The work is performed at Forsmark Group AB as a final step in the Bachelor ofScience program in nuclear engineering at the University of Uppsala in 2013.The work is part of an ongoing process of streamlining project system model FKA.Streamlining the project model is an important aspect that affects all largecompanies that somehow have a project governing body when there is muchfinancial resources to save. Although the quality of the projects is positivelyaffected by efficiencyThe aim is to find possible common weaknesses and strengths of the project systemby interviewing a number of project managers, and using the systems in placeexamine the model.As part of the work also includes examining what project managers have to adjust tothe newly implemented system VPMM, and other newly introduced elements thathave been added to improve the efficiency in the futureProject System is a complex system that is influenced by many different parametersand participating individuals' attitude and personality. But then small changes in themodel could have major economic consequences.The thesis has generated results that show common weaknesses among the variousprojects and their project managers' general opinions about the project model. It alsopresents some possible solutions based on own thoughts and those interviewedobjects suggestions and comments..

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Background: The most energy efficient houses today are so called passive houses. These houses achieve high energy-efficiency partly by having well insulated walls. U-value describes the amount of heat transfered through a building element, the more insulation, the smaller U-value. A typical passive house wall have a U-value of 0.10 W/m2,°C. The passive houses are primarily made as small family houses and not as a block of apartments.

The aim of this Master?s thesis is to examine how six fantasynovels reflects or breaks the heteronormativity in society bylooking at how gender roles and sexuality are described.The theoretical framework is based on Judith Butler's theoryabout the heterosexual matrix which requires two separategenders and a compulsory heterosexuality and YvonneHirdman's two principles about dichotomy and hierarchy.The method used was idea analysis where dimensions basedon the theoretical framework were constructed. Thesedimensions were: behaviour, tasks, relationships and roles.The result shows that all of the books both breaks andreflects the society's values on gender and sexuality. Thereare some stereotypes present, for example that intuition isassociated with femininity and physical strength withmasculinity. However, the books also offer characters ofboth sexes that break the gender stereotypes, such asstrong women and emotional men.

The waste fractions offered to households in Sweden differ depending on where you live. The responsibility for the waste are grounded by the Swedish law where the municipality are responsible for the collection of household waste and FTI are responsible for collecting all packages and papers that the households sorts out. A new waste regulation is under consideration where the responsibility for the household waste may change. The bulky waste from households is collected at recycling centers where the households leave it in different containers for different fractions. These recycling centers are formed different and the fractions offered in them also differ depending on in what municipality they are located.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Most major companies today have a visual identity. It answers questions like: which font do I use? and when can I use the logo or not? Westinghouse Nuclear Fuel in Västerås have a visual identity but no guidelines for the employees to follow. Further-more, rollups and rollup handouts produced by Westinghouse are not mentioned in the visual identity. ?erefore the external information from Westinghouse is someti-mes, both by employees and customers, perceived as not uniform.

The rising demand for electricity and heat raises a big challange for the society and engineers. Many products have been introduced to the market to supply more energy to the energy systems. Absolicon AB is a Swedish company that develops and markets a combined heat and power generating product. The product, Absolicon X10, uses a parabolic trough to concentrate the radiation of the sun onto a receiver. The receiveris equipped with mono crystalline solar cells and is cooled by a circulating liquid media.

To create multifunctional buffer strips along a watercourse in an economically sustainable way requires consideration of many different factors. In this plan we have selected pollutant reduction as the main purpose of the buffer strip. We have also strived to achieve minimal income loss due to reduced production, increased biological diversity, good game preservation that leads to higher income from hunting, aesthetical satisfaction and possibility to profit from available subsidies. This is done mainly to make landowners/farmers more interested in creating buffer strips along water courses. As sand is the dominant type of soil in the area, the water course is less affected by surface runoff compared to if the soil would be clay or some other finer texture. Game preservation and subsidies have therefore been the main factors when establishing the width of the strip, because these require wider buffer strips in some cases.