The purpose of this study is to increase the understanding of activities, flows and waste in a company's production process. By performing a value stream analysis, Non-value adding activities are identified in a production process and then the suggested improvements that can reduce lead times will be stated. The value-stream mapping identifies the flow of information and the flow of material in a production process and this provides the basis for the identification of Non-value adding activities.We conducted the study at Lammhults Möbel AB in Lammhult Sweden, where the production flow of Spira-21 has been investigated. This to identify any Non-value adding activities that affect the flow negative and consumes time and money in a non-value adding way.A reasonable approach for the project was taken by studying the methodologies and theories. We conducted interviews and site surveys at Lammhults Möbel AB where the flow of information and material in the production process were investigated.

The objective of this thesis is to map the resources and methods used at the department OPPC, at AstraZeneca, and derived from that give suggestions on possible solutions that will increase their productivity.Mapping of the product flow, as well as gathering of process data, has mainly been done using observations, but consultation with the process technicians has also played a great role. Further have theoretical methods been used, based on literature studies, within the areas of Lean production and statistics.The work has incrementally gone forward since the steps taken has been restricted by the irregularity of production which led to the need of creating a fictive production flow. This has affected the lead-time calculations in the way that they are meant to give an indication, rather than an absolute truth, on how different methods described shall be used.The current state analysis showed multiple areas of improvement when defining capacity as value adding time in relation to total throughput time. Using the "standard scenario" as a basis showed that the actual production flow only constituted 50% of the total project time. Further it showed that the workflow contained more Non-value adding activities than value adding activities, which is a result of how the work is distributed within the department as well as in the different projects.

Increased competition in the IT industry has sparked a need for developing faster innovation processes with more predictable output. One of the biggest issues when it comes to achieving a faster flow through the innovation process lies in managing its high degree of variation. Proposing a solution to this problem, Lean Software Development (LSD), was developed to provide a framework for how IT companies should organize its software development process to achieve increased speed and quality. This study examines to which extent LSD, as a set of values, principles, methods and tools, can be used to improve flow efficiency in the innovation process. A case study of a multinational IT company was made by conducting ten semi-structured interviews with current employees.

The manufactory industry, due to decline in profit margins, is seeking new business opportunities by moving towards servitization and value-adding services in after-sales. We have therefore conducted a case study to investigate a manufacturing company in their current transformation towards servitization. By studying the management perspective, we aimed to understand how Information Technology, by adding value, could play a role in the transformation process. This study shows that information technology can take an integrating role, by supporting new value-adding services to provider and customer, as well as a co-creating role, where both provider and customer benefits by learning from each other, in the changing work process initiated by new services. The study has also shown that Information Technology, together with organization, information and people, are crucial components in the manufactory industry?s transformation towards servitization.  Furthermore, the study has also shown that the value chain has the potential to drastically change due to the value-adding that the information technology brings to the progress of servitization..

The objective of this study is to examine how Lean can make the utilization of inventory more effective and, from a Lean perspective, examine how the value-adding activities related to inventory can increase. To examine this, a case study was perfomed at Svenska Fönster. The conclusions of this study are that Lean can advantageously be applied on inventory to increase the efficiency. .

The objective of this study is to examine how Lean can make the utilization of inventory more effective and, from a Lean perspective, examine how the value-adding activities related to inventory can increase. To examine this, a case study was perfomed at Svenska Fönster. The conclusions of this study are that Lean can advantageously be applied on inventory to increase the efficiency. .

An ever-increasing population, urbanization and visions towards sustainable cities clarifies the need of densification. When densifying existing urban areas adding storeys could serve as a residential densification, which would also meet the market demand for centrally located apartments. An increased understanding of the potential of vertical densification gives way to the aim of this thesis to increase the amount of centrally located housing.This thesis provides knowledge of adding storeys and how property owners can identify opportunities in their existing building stock.The first question, What kind of residential densification takes place in Sweden today? highlights ways of residential densification; development of brownfields, infill and adding storeys, where adding storeys is what this thesis then focuses on. The result came through a literature review that also clarified important factors when adding storeys.

Title: Process description of round timber transports ? a case study at Tra?frakt Go?taland ABAuthors: Karl ? Johan Tern, Christian Johansson and Andreas IvarssonTutor: Anders JerrelingExaminer: Fredrik KarlssonBackground: Today the profitability of forest haulers is unsatisfactory. Negotiations on prices are more about the relative strength of the negotiation parties rather than a discussion about actual costs. Adding extensive changes in the forest haulers cost structure has led to insufficient knowledge of whether the negotiated prices really correspond to their costs.Methodology: We decided to carry out a case study at Tra?frakt Go?taland AB, a special interest organisation whose members represent the majority of forest haulers in Go?taland.Purpose: To describe the processes and underlying activities of round timber transports.

Title: Process description of round timber transports ? a case study at Tra?frakt Go?taland ABAuthors: Karl ? Johan Tern, Christian Johansson and Andreas IvarssonTutor: Anders JerrelingExaminer: Fredrik KarlssonBackground: Today the profitability of forest haulers is unsatisfactory. Negotiations on prices are more about the relative strength of the negotiation parties rather than a discussion about actual costs. Adding extensive changes in the forest haulers cost structure has led to insufficient knowledge of whether the negotiated prices really correspond to their costs.Methodology: We decided to carry out a case study at Tra?frakt Go?taland AB, a special interest organisation whose members represent the majority of forest haulers in Go?taland.Purpose: To describe the processes and underlying activities of round timber transports.

Title: Process description of round timber transports ? a case study at Tra?frakt Go?taland ABAuthors: Karl ? Johan Tern, Christian Johansson and Andreas IvarssonTutor: Anders JerrelingExaminer: Fredrik KarlssonBackground: Today the profitability of forest haulers is unsatisfactory. Negotiations on prices are more about the relative strength of the negotiation parties rather than a discussion about actual costs. Adding extensive changes in the forest haulers cost structure has led to insufficient knowledge of whether the negotiated prices really correspond to their costs.Methodology: We decided to carry out a case study at Tra?frakt Go?taland AB, a special interest organisation whose members represent the majority of forest haulers in Go?taland.Purpose: To describe the processes and underlying activities of round timber transports.

The object of this examination project is to produce a method of work sampling at Rapid Granulator AB. The aim is to perform the method at the company and evaluate if it is executable. The study is delimited to the basic construction of the 45-series in the assembly hall.Preparations to produce the method of the work sampling resulted in definitions of activities, a form and a product tree. Several days were spent studying the assembling to learn and understand the entirety.The work sampling result showed a large amount of no value adding time that was used in the assembling. Some of the activities could be reduced and we observed some problems during the assembly process.

Saab Component Maintenance in Linköping, Sweden, offers maintenance, repair andoverhaul (MRO) services for civilian and military aircraft components. Lately, thedepartment has struggled with slow throughput rates, despite various counteractingattempts. Studies show, that large parts of the delays derive from the logisticsdepartment where goods arrive and dispatch. Therefore, Saab wants to carry out anextensive analysis of the department in order to further investigate what is causing itsslow throughput rates.The thesis begins with extensive mapping over Component Maintenances whole valuestream to find out how departments interact with each other and which roleindividual departments have in the total supply chain. Out of 13 000 different partnumbers, components were divided into five product families.

Sport is the biggest movement in Sweden and among youth is seen as the most important and one of the most prestigious leisure-time activities. Riksidrottsförbundet (RF) is the main organization of the Swedish sport movement. It receives funding from the government in order to represent and develop the Swedish sports clubs. The government?s choice to support sport within RF happens at the expense of other sports, for example skateboarding.

The objective of this study is to examine how Lean can make the utilization of inventory more effective and, from a Lean perspective, examine how the value-adding activities related to inventory can increase. To examine this, a case study was perfomed at Svenska Fönster. The conclusions of this study are that Lean can advantageously be applied on inventory to increase the efficiency. .

A large proportion of businesses around the world is today ISO 9001 certified and is consequently conducting internal audits on a regular basis. It has however not been possible to conclude that internal audits always add value to the organisation, despite the large utilisation of this tool. Some authors, e.g. Alic & Rusjan (2010) and Wealleans (2000), mean that there are possibilities that internal audits may be used as a value-adding improvement tool. This has led to the emergence of this master?s thesis.The purpose of the case study was therefore formulated to examine how internal quality audits can be made more effective and used as an improvement tool.