The aim of this thesis was to investigate if the robotized welding method FSW (Friction Stir Welding) could be applied for joining a rotating structure in an aero engine at Volvo Aero Corporation. FSW is expected to introduce less defects than today?s welding methods and could therefore be suitable for critical aero components. The material is the Nickel based alloy Inconel 718, however a material experimentation is outside the scope of this report.The main goal of this study is to verify if the ESAB ROSIO robot based FSW-system has a suitable work space to be able to weld the rotating structure, and if the welding tool has accessibility to the joints. The FSW-process needs a rigid fixture, and a number of fix-ture concepts are presented based on a proposed weld sequence.

De sulfidgruvor belägna i Långbantrakten som studien behandlar ligger i den västra delen av Bergslagen utanför Filipstad i Värmlands län. Opaka mineral (malm) från två mindre mineraliseringar, Näset och Getberget, har studerats med malmmikroskop och mikrosond för att beskriva mineralogin i området. Båda områdena domineras av olika (Cu-Fe-Pb-Zn)-sulfider, i Näset av kopparkis (CuFeS2), blyglans (PbS) och zinkblände ((Zn,Fe)S) och i Getberget av blyglans, zinkblände, kubanit (CuFe2S3) och magnetkis (Fe1-xS). I Näset finns en del mindre frekventa mineral, två olika faser av Co-pentlandit (en Nickelrik och en utan Nickel), gedigen Sb och Bi, (Ni-Co)-sulfid, breithauptit (NiSb) och magnetkis. Kubanit är även ett viktigt mineral som speglar mineraliseringens bildning.

Biogasprocessen är en komplex anaerob nedbrytningskedja där olika mikroorganismer är inblandade. Vanligast är att biogas produceras i mesofil rötning (cirka 38 oC), men även termofil rötning används (> 50 oC).Svensk Biogas i Norrköping använder återstoden av etanoldestillationen hos en närliggande etanolproducent (drankvatten) som substrat. Substratets höga temperatur vid leverans motiverar termofilt rötningsförsök av drankvatten.Försöket genomfördes i 55 oC med två kontinuerligt omrörda tankreaktorer (CSTR) och en termofil ymp. Biogasproduktion av drankvatten undersöktes. Sätt att hantera och motverka höga ammoniumhalter, samt effekter av näringslösningstillsats undersöktes.

The thesis evaluates a new kind of bearing arrangement in a traction motor that ABB hasdeveloped. Since the arrangement is designed in a new and innovative way it needs to beevaluated to see if it is safe to use. In today?s traction motors, bearings with a big internalclearance (C4-clearance) are used. The basic idea of the new arrangement is to reduce the fitsbetween the bearing and shaft/house.

Knuthöjdsmossens naturreservat är beläget i Hällefors, Örebro län och är känd för sina unika gölar, fauna och dess sanddyna. Strax intill Knuthöjdsmossens Naturreservat finns en nerlagd industrideponi som var i bruk i början av 1800 talet fram till 1983 vid namnet avfallsupplaget Piteå. Det avfall som deponerades bestod av restprodukter, industriavfall, byggavfall, grovsopor, järnspår och slipspån. Mellan åren 1994-2009 har Bergslagens kommunalteknik utfört ytvattenprovtagningar i området, de har dock upphört, men det finns ett intresse om att återuppta provtagningarna, därtill syftet med denna uppsats; en förstudie om vilken miljöpåverkan avfallsupplaget Piteå har på området Knuthöjdsmossen. Metallkoncentrationer från ytvattenproverna från åren 1994-2009 analyserades samt så insamlades kompletterande jordprover med en XRF-skanner.

This thesis examines the conditions for participation in the decision making process of a possible mine establishment in Storuman municipality in the north of Sweden. This is done through a case study where the main actors are the mining company Nickel Mountain AB, the municipality Storuman and the Sami village Vapsten. As a theoretical framework Cecilia Eriksson?s division of democratic theories is used as a starting point. Methods as described in deliberative democratic theory, such as discussion by effected community members, are seen as a method within the participatory democratic tradition, not a theory of its own.

Uppdragsgivaren Outotec Kil AB marknadsför, konstruerar och levererar strippmaskiner för koppar och Nickel. En del av denna strippmaskin för koppar är en korrugeringspress som pressar tre stycken veck över plåten. Var tredje plåt pressas och sedan staplas ett antal plåtar ihop till en bunt som senare smälts ner. Anledning till att var tredje plåt korrugeras är för att ge ett mellanrum mellan plåtarna som ger en snabbare och effektivare nedsmältning.Nuvarande korrugeringspress pressar tre stycken veck över hela plåtytan med ett djup på 30mm, vilket kräver en stor presskraft. Den stora presskraften kräver en kraftig konstruktion och det har gett vissa problem: Dyr att tillverka på grund av dyra och tunga komponenter.  Stora hydraulcylindrar som kräver ett högt flöde.

AbstractThe research project Liberation, supported by the European Commission under the Environment and Sustainable Development Programme (Fifth RTD Framework Programme) aimed at developing a decision support system for ecological risk assessment of contaminated sites has proposed a tiered system including the triad method. This method integrates contaminant chemistry and bioavailability analyses with observed ecotoxicological effects in soil and groundwater. In this study the triad method was used to perform a risk characterization of a former surface treatment and metal industry, now used for the student union buildings of the Mälardalen University in Eskilstuna, Sweden. On the site, high concentrations of copper, zinc and Nickel have been detected in the soil in a preliminary investigation of contaminant levels with XRF. For performing the risk assessment of the site according to the triad method, contaminant bioavailability, soil metal concentrations and soil toxicity were determined and an ecological assessment was carried out on four selected soil samples (one reference soil and three samples with low (B), medium (C) and high (D) contaminant levels). Contaminant bioavailability was measured through leaching (ISO TC 190/S7) and biouptake tests (DGT).

Ensåsengruvan is a mine situated within Ljusdals municipality in central Sweden. Themine was in use from 1984 to 1991 and has since been undergoing a remediation program. Mine tailings from sulfide rich ore is a potential environmental hazard due to its tendency to cause acid waters and heavy metal leakage. Lake Ensjön is situated one kilometer from the mine area. Due to the hydrological conditions it was not expected to receive inflowing water from the mining area.

Highly polluted urban storm water from e.g. highways can contain large amounts of heavy metals that may cause harm if they are discharged into recipients. To remove the heavy metals a possible low-cost method that does not require much maintenance, could be the use of reactive filters with filter materials consisting of industrial residues or other cheap mineral based materials. Dissolved metal ions are removed by reactive filters through the processes of ions binding to active sites on the surface of the filter materials, or by formation of insoluble precipitates.The ability of CaO-treated granulated blast-furnace slag, iron oxide coated sand, olivine and nepheline to remove seven heavy metals (Cr, Cd, Cu, Ni, Zn, Pb and Hg) from urban storm water was studied. Initially batch experiments were performed where the effect of pH, dissolved organic carbon (DOC) and dissolved ions on the adsorption efficiency was studied.

Four different kinds of filter-materials with reactive surfaces have been studied concerning their capacity to absorb heavy metals in leachate from a municipal waste deposit. The heavy metals studied were: lead, cadmium, copper, mercury, chromium, Nickel and zinc. The leachate contains high levels of dissolved organic carbon (DOC) and has a high pH-value along with a high buffer capacity. These characteristics of the leachate make it difficult to remove pollutants and require efficient filters. The filters that were examined in the report are blast-furnace slag with CaO, sand covered with iron oxides, olivine and nepheline.

This master thesis encompasses an inventory of the older industrial community of Gimo. Investigations of the contamination situation for each industrial area were done. A risk classification according to the Swedish Environmental Protection Agency?s ?Method of Surveying Contaminated Sites?, phase one, followed. The risk classification was done on areas of Iron Work, a rockwool industry and a landfill. Gimo have had iron manufacturing from 1615 until 1945. Gimo have had two blast-furnaces and two smithies periodically.

Field balances based on supply and removal of trace elements from the topsoil have been calculatedfor farms specialized in crop, dairy and pig production in Sweden. Today's field balances have beencompared with the field balances of 1990 in order to examine if, and then how, the situation haschanged. Studied trace elements are arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu),mercury (Hg), manganese (Mn), Nickel (Ni), lead (Pb) and zinc (Zn).The balance calculations show that the stores of Cu and Zn are depleted with an average rate of -15% and -6 % over a 100-years period on crop farms when only commercial fertilizers are being used.The concentrations of Hg and Pb tend to increase in the topsoil on crop farms with more than 3 % forHg and with 2 % for Pb in 100 years. There is today balance between supply and removal of the traceelements As, Cd, Cr, Mn and Ni. In the south of Sweden, on crop farms with sugar beets in the croprotation, one can see a decrease in the concentration of Cd in the top soil by -6 % over a period of100 years.

This work consists of a survey and risk classification of eleven metal industries including foundries, finishers and engineering industries in two industrial areas in Mora. The study follows a method called MIFO (Method of Surveying Contaminated Sites) composed by the Swedish Environmental Protection Agency. In the method assessments of the degree of hazard posed by the pollutants, the level of pollution, the conditions of dispersal, sensitivity and the degree to which the area is worthy to protect are made for each contaminated site (object). The assessment classify the objects into four risk classes in which risk class 1 denotes a very large risk, 2 large risk, 3 moderate risk and risk class 4 little risk. The work of surveying using MIFO is divided into two phases.

Flygmotorindustrin är en ledande industri i att utveckla och nyttja avancerade legeringar. Titanlegeringar har använts inom flygbranschen sedan 40-talet, men i andra branscher har de varit mindre vanliga. I dag ökar titananvändningen inom flera olika branscher samtidigt som flygbranschen är i en kraftig högkonjunktur. Efterfrågan är stor på nya flygplan och motorer för att minska vikt och bränsleförbrukning. Den ökade efterfrågan har bidragit till att priset på titanmetall har flerdubblats under en tvåårsperiod.