The overall goal of this diploma work is to produce a design of a 5 GHz radio frontend using Agilent Advanced Design System (ADS) and then build a working prototype. Using this prototype to determine if RF circuits at 5 GHz can be successfully produced using distributed components on a laminate substrate. The design process for the radio front-end consists of two stages. In the first stage the distributed components are designed and simulated, and in the second stage all components are merged into a PCB. This PCB is then manufactured and assembled.

Marinediesel has, to meet there customers needs for a suitable sterndrive to powerboats, developed a prototype. The prototype is currently in the testing phase. The opportunity to test the sterndrive under load inside the workshop has not previously been possible. Until now the drive has been tested in a test bench without any load on the propeller axle. The prototype has also been tested under real conditions mounted on a boat.The idea with my thesis was to create a test bench that can run around the clock in order to be able to test things like wear and service intervals and other things that require that the test interval is long.

The purpose of this paper is to study how the TV program Border Security: Australia?s FrontLine (Gränsbevakarna Australien) can be seen to reproduce networks of human and non-human actors. The aim is thus to investigate how boundaries between nations are upheld and how people, as a consequence, are discoursively categorized and what preconditions this create for people?sidentity- and meaning-making practices.The theoretical and methodical framework is built upon Bruno Latour?s work on Actor-Network-Theory, and discourse analysis inspired by Michel Foucault. The empirical material consists of two episodes of the TV program.

When several production units provide a district heating network, water is pumped from different directions. When the flows from the plants finally meet in the network, the water can be completely still. These places are called zero flow zones. In district heating networks with several plants, which also have different supply temperatures, large and frequent temperature fluctuations can occur when the zero flow zones move. This may cause wear on the pipes, a phenomenon called low cycle fatigue.For this reason it is important to examine where and when zero flow zones that cause temperature changes occur.

ÅF Test Center in Borlänge had a need to expand their capacity for compressive and tensile strength tests. They wanted to do this by using a hydraulic cylinder, which they already possessed, to apply the force with. This required a load receiving structure. The aim of this work was to design and dimensioning a test bench for a cylinder marked NIKE 300 tons. The work would result in a completed design proposal on a test bench which could manage to run the compressive and tensile strength tests of up to 3000 kN.

Harmonics are a well-known problem that has to be dealt with in the design of thegenerator. Internationally accepted standards limits the amount of harmonics allowedin the no-load voltage. These limits can be difficult to fulfill with integral slot winding,where the number of slots per pole and phase is an integer. The presence of thedamper winding often makes the problem with harmonics even worse and harmonicswith frequencies of order 6q±1 arise with significant amplitude. How the damperwinding is designed affect the content of harmonics in the no-load voltage and the aimwith these ? has been to investigate in which extent design of the damper windingaffects the contents of harmonics.Simulations with the 2-D finite element method have showed that if the damper barsis centered in the pole shoe, the amplitude of the harmonics of order 6q±1dependsboth on the ratio between the stator slot pitch and damper bars slot pitch and if thedamper bars are connected between the poles or not.If the damper bars is displaced with ¼ stator slot pitch alternately, the amplitude ofthe harmonics of order 6q±1 is reduced and the influence of the ratio between thestator slot pitch and the damper bars slot pitch will vanish.

I dagens samhälle har många kundföretag problem med datalagringen vilket beror på att behovet av att lagra data började öka kraftigt under 2000-talet och har fortsatt öka sedan dess. När kundföretagen började använda sig av virtualisering så expanderade även datastorleken. I samband med att datastorleken växte ville företagen att data inte skulle lagras lokalt utan att den skulle vara lagrad på en central plats som en serverhall och vara överskådlig.Studien utfördes på tre sätt, först undersöktes vilka datalagringslösningar som fanns och det skedde genom litteraturstudier. Därefter kontaktades företag som använde olika lösningar för datalagring. Nästa steg var att kontakta de leverantörer som kundföretag använde sig av och som levererade lösningarna.Under arbetets gång upptäcktes olika lösningar på problematiken med ett ökat datalagringsbehov.

ABSTRACTBackground: Children and adolescents growing up in families where parents have serious problems are exposed to an increased risk of developing poor mental or physical health themselves. In a support group work they can meet other children in the same situation, receive help and support to process their emotions and manage their everyday life.Aim: To investigate if support group work at Trappan can reduce the psychological problems load and increase the experience of life quality, hopefulness and optimism in children and adolescents growing up in families where either addiction or mental illness occur in one of the parents. The purpose was also to investigate if there was any difference between these both child groups regarding psychological problems load, experience of life quality, hopefulness and optimism before and after support group participation.Method: Questionnaire study on children and adolescents of parents with addiction or mental illness. The children participated in support group work at Trappan. The measuring?s were conducted before and after support group participation.Results: In both groups an increased life quality in connection to finished support group participation was observed.

The calf extrator?s function has been studied, through measuring traction and how this varies in different situations, in comparison with corresponding manual traction situations. This was done against the background that excessive force at assisted calvings at dystocia can mean life threatening damages on the calf such as grave acidosis, vertebral fractures, femur fractures and rib fractures. The calf extractor has earlier been measured to pull with greater force than the established maximum force of ?two strong men?.

The aim of this study was to examine the current and historic mercury(Hg) load of the lake Storjuktan due to its recent exposure to a local potential source of Hg in form of the Sulphide mine Blaikengruvan(2006) and an earlier potential sources of Hg-load, the damming of the lake(1960s). Sediments were extracted using a HTH-sampler, freeze-dried, and analyzed for tot-Hg, LOI and activity of 210Pb and compared to samples extracted prior to the opening of the mine(2006). Constant initial concentration (CIC)-dating model was used for dating the samples. Low levels of Hg (100ng/g) were found throughout the lakes sediment. The highest levels of Hg(220ng/g) was detected at a depth of 4-5cm dating back to the mid 1970:s, suggesting that increased levels of atmospheric Hg rather than damming of the lake has caused the increase of Hg.

The thesis was done in collaboration with EAB situated in Smålandsstenar. In the initial discussion faze on doing a thesis with them there was a need to analyze and ensure the strength of an existing product, cantilever racks. This included performing FEM calculations on a model and comparing the results with physical tests.EAB has two models of cantilever racks, a light duty and a heavy duty. Within the heavy duty model series there are five product variants that differ in both size and load capacity. We will be working with the product variant with a load capacity of 1000 kg/arm which is the variant that is in the middle of the series.When we started work on the thesis we did a literature study and couldn?t find any well defined methodology that integrates both product development and computer aided design analysis.

Background: Today many companies are competing to get space in our minds. Companies spend a tremendous amount of money on building strong brands. It is not just about making us aware of their logo, today it?s more about giving the brand a ?soul? and to load it with different values. Due to today?s globalization there is also interesting to look at it from a cultural perspective.

Because social media is personal and reaches users directly, it has become an important means of communication for companies trying to reach out to their audience (Nygren & Wadbring, 2013). Especially the possibility of interactivity has been discussed as social media's big advantage. But how much two-way communication is actually possible on social media? This is a quantitative study that focuses on how Swedish Facebook users in the ages of 16-25 interact with companies on the social network. The aim was to contribute with increased information and knowledge about how the users mentioned above interact with the companies as well as how the users perceive the companies communication and presence on Facebook.

Society and technology develop together in interaction processes. Because of the development of information technology, the Industrial society has been left behind in favor of a society where information is the key production factor, i.e. the Information society. In the Information society, social functions and processes are organized in networks. These networks integrate geographically separate markets to parts of a complex global economic system.

Traffic accidents where wild animals are involved represents between 60 and 80 percent of all reported accidents, depending on location in Sweden. In a country like Sweden, with a lot of forest, there is always risk of a collision with a wild animal. Imagine if you, as a road user, had the possibility to receive warnings when the risk of an accident according to statistics is extra high.Wildlife Detection Network is a wildlife warning system with an information service, which makes the whole concept unique. When an animal is approaching the road, it is registered by sensors, and warning lights along the road are lit to inform drivers of the potential danger. In conclusion, this is a direct warning to all drivers on the road where the system is placed.When an animal is registered by the sensors, information containing time, date, weather circumstances and coordinates are sent to a database.