This master thesis was carried out at Scania in Södertälje, Sweden. It investigates the possibility of changing a connector interface that is used when there is a need for splicing the wheel speed sensor and thereby determine the consequences.The problems that exist with the current connector interface occur during assembly, as more time is required to complete a connection in a reliable manner. A complete connection requires joining the male and female connector, insert the connection into a protective retainer and then strap a cable tie on each end of the retainer. This process makes it more time consuming and it requires 20-30 seconds to complete the connection. Solving this problem would save time and enable easier assembly, therefore resulting in economical benefits.This thesis was accomplished through discussions with different sections at Scania, studying available documentations, observations during assembly, writing a requirement specification and contacting suppliers.The aforementioned methods resulted in four connector suggestions, the DT and DTMH connector from Deutsch, MCON connector from TE connectivity and MLK connector from Kostal, each of them compliant with the set demands of the surrounding environment.

BackgroundToday a common approach to solve a complicated problem is to assemble a temporary workforce in order to solve the problem by working together within a project. One of the difficulties with working in projects is to maintain the planned budget. Working hours and costs are often exceeded. Many companies presume that any certain project will succeed, a presumption that leads companies not to anticipate risks involved in a project. In companies today there is seldom time for evaluation or moderation of a project, in order to have time for evaluation there is a great need for an adequate planning of the project.IntentThe intention with this study is to create a model for planning, budgeting and evaluation of projects within consultancy companies.MethodWith the help of interviews and discussions within the group Hamnar och Byggkonstruktioner at Sweco has evidence to present a proposal on planning, budgeting and monitoring been developed.ResultsA model has been developed to ease for consultancy companies to plan, budget, monitor and evaluate projects.

In support to a decision to be made by the Swedish central competent authority on a minimal amount of straw for conventional growing-finishing pigs, a study using 168 pigs provided 7 different amounts of straw (20, 40, 60, 80, 100, 200 or 300 grams/pig/day) was performed. The straw was provided either once or four times per day. Detailed behaviour observations were made using focal animal sampling and continuous recording for one hour between 9 and 10 am and again between 3 and 4 pm. The data analysis is presented in three ways: broken stick model, polynomial trend line and logarithmic trend line. No method was suitable on its own but the use of all the methods simultaneously was found to portray the data in the best way.No significant differences were found when comparing pens provided with straw once or four times per day.

På Sveriges fastighetsmarknad har man de senaste åren kunnat urskilja ett allt högre fokus påmiljön från dess aktörer. Miljödebatten i Sverige har snabbt fått fäste och allt fler företag förstårvärdet av att fokusera på sådana frågor.Att utvecklingen fortsätter att gå framåt är viktigt då fastigheter och dess tillhörande byggnaderstår för nästan en tredjedel av världens utsläpp av växthusgaser och bara byggandet och driftenstår för cirka fyrtio procent av den globala förbrukningen av råvaror och energi. Prioritering avmiljöfrågor blir således viktiga vid fastighetsförvaltande och nyproduktion.Tidigare forskning visar att det finns en mängd incitament för att bygga och förvalta grönt. Ävenhyresgästerna har incitament för att hyra gröna lokaler. Vidare visar internationella studier att detinte alltid krävs stora åtgärder för att uppnå bra resultat vad gäller fastigheters energiförbrukningoch hållbarhet över tid.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

AbstractThe concept project is today used in several contexts and has different meaning in different contexts. Lately, projects have been seen as a form of organization and more companies convert from traditional organizing to organizing in a project form. The purpose and focus of today?s project is not only to increase quality and competence development for management but also to integrate different actors in order to e.g. increase customer value.LänsTeknikCentrum AB (LTC) in Jönköping is running different projects in order to support companies in Jönköping County.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

In several cases, systems that have been developed have been very time consuming and cost a lot of money, but they still do not fulfil the users requirements and requests. To make new systems better, you have to find a way to communicate that allows the developers to understand the needs of the user. The aim for our thesis is to highlight the importance of communication in system development. To investigate this we have choosen to do a study of the real-estate system. The work methods that have been used include mock-ups and informal conversations with the user, who is employed by the Church of Sweden in Ronneby.

BackgroundToday a common approach to solve a complicated problem is to assemble a temporary workforce in order to solve the problem by working together within a project. One of the difficulties with working in projects is to maintain the planned budget. Working hours and costs are often exceeded. Many companies presume that any certain project will succeed, a presumption that leads companies not to anticipate risks involved in a project. In companies today there is seldom time for evaluation or moderation of a project, in order to have time for evaluation there is a great need for an adequate planning of the project.IntentThe intention with this study is to create a model for planning, budgeting and evaluation of projects within consultancy companies.MethodWith the help of interviews and discussions within the group Hamnar och Byggkonstruktioner at Sweco has evidence to present a proposal on planning, budgeting and monitoring been developed.ResultsA model has been developed to ease for consultancy companies to plan, budget, monitor and evaluate projects.

SecRePac is a household appliance that simplifies sorting of packaging such as milk, juice and yogurt containers. By shredding the packages SecRePac reduces its volume uptake both in the home and at the recycling station. This leads to minimization of both transports to the recycling stations and truck transport for emptying the containers at the recycling station.The greenhouse effect deteriorates and becomes worse and worse leading to extreme climate changes and natural disasters such as floods as an example. Carbon dioxide emissions are the major reason for this and at least 30 percent of all these emissions come directly from transports. In the EU carbon emissions has decreased in the past few years.

This thesis deals with the numerical 3D simulation of a four stroke, spark-ignited, internalcombustion engine, which is mounted on a high performance motorcycle. The work, carried outin collaboration with Politecnico di Milano and MV Agusta, focuses on the simulation of theintake, compression and expansion stroke, including combustion simulation, using an opensource CFD code.Simulation of internal combustion engines offers a great challenge in the field of CFD research.Moving boundaries of the solution domain, caused by the motion of the piston and valves, leadsto deformation of the computational grid, with decreasing quality of the solution as result. Basedon this, a previously developed mesh motion strategy was employed where a number of meshesare used to cover the whole simulation cycle. Within each mesh interval the internal cell pointsof the mesh are moved to account for the boundary motion of the piston and valves. This strategywas previously applied to simplified geometries as well as real engine geometries.

In this report a study is carried out with the aim to identify added values of EPC projects implemented in schools in order to increase the interest of EPC projects on the market. The report examines how the planned maintenance, supervision, maintenance and corrective maintenance is affected, how insurance premiums and terms are affected, the indoor environment and how the tasks of the operating staff is changing. A literature study of energy savings, energy use in schools, maintenance and insurance as well as how energy efficiency improvements are related to the Swedish environmental objectives has been made. Visits were carried out in Ludvika, interviews were also carried out with operation technicians and local strategists in Ludvika as well as employees of insurance companies.Schools often have neglected maintenance and problems with ventilation and indoor environment. Schools also have a large energy saving potential due to their low utilization, mainly because they are empty parts of the year.

The usage of internet is growing significantly every year in today?s society and whether you like or not, the internet has an influence in your life. It is therefore important to find out how people are affected by its use. We have through our study interviewed a number of people that uses internet on a day to day basis, who have agreed to live without internet access for a period of time. We started out by interviewing these people about their internet usage and what it means to them, then proceeded with their non-internet access period.

Oilseed rape constitutes a good break crop within a cereal dominated cropping system. The normal sowing time for winter rape in Sweden is August. It's a time in the cropping year characterized by a heavy work load, such as harvest and soil management. In addition, it is often a period with large precipitation. Thus, it is sometimes problematic for the farmer to do the sowing of winter rape at the optimal time.