Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

The Swedish forest policies have earlier mainly been focused on two goals: production and environment. The production goal aims to benefit the economical gains from forestry while the environmental goal primarily aims to shield the ecological values of the forest. With the introduction of the Swedish environmental code and the environmental objectives it was made clear that the overall objective for Swedish community development, including the forestry sector, is sustainable development. Sustainable development includes supporting economic, ecologic as well as social values of which the latter seems to have been forgotten in the forestry sector. This was recently brought to attention to the sector and the debate how to handle the social values is now ongoing.The legislator has not been unaware of the social values since they have since long been at least somewhat included in the preliminary works.

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

Sweden is dependent on secure sea transport. Shorter disruption of imports of fuel and crude oil can be managed with an emergency stock, but a prolonged halt in imports creates problems. For industry, the vulnerability is greater. Fragmented production chains in combination with expenditure reductions in inventory causes a dependency on proper transport of intermediate goods in the manufacturing industry. A lengthy disruption thus involves disruption of production for both domestic consumption and for export goods containing imported parts.In order to secure shipping routes with a limited number of vessels, Mine Counter Measures (MCM) capacity is required, and according to the Armed Forces, developed with new sensors and autonomous vehicles.

The following is an examination of work and gender and how they interlocked in a Swedishbrewery between 1923 and 1939. Leaning on labor process theory and Marxist feminist theory,this paper examines what constituted women?s work in the brewery industry in this era, how women?s work changed with rationalization and economic recess, and how the all-femaleunion locale reacted to these changes. The events portrayed are related to earlier research ongender on the labor process, to the history of the Swedish labor movement in large, and to theevolution of the so-called ?Swedish model? with its relatively low level of conflicts on thelabor market.

In modern society globalisation is a fact within all industries, the textile industry included. Due to improvement in areas such as logistics and communication international trade have developed fast. As changes occur rapidly on the global market and companies must adjust and revise their processes in order to stay competitive.Because of the global price reduction consumers around the world expect low-price products, which mean that the companies have to find new ways to produce in a cost-efficient way. To maximize profit most of the textile production is situated in low-cost countries due to its labour-intensive character. It is crucial for fashion companies to allocate their activities in their value-chain effectively in order to reduce lead-times.

The trend towards increasingly large farming units raises questions regarding how to better monitor production. Larger units make the impact from possible errors more severe, which increases the pressure on management supervision. To cope with management issues, prevent errors and handle increased demands on traceability and documentation, the Real Time Location Systems (RTLS) concept is making its way into various parts of agriculture. In sectors outside agriculture, RTLS are already being used successfully to track and locate items through nodes at different levels of accuracy, such as room level or the relative or absolute position. Empirical data can be received in real time from the nodes.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

This academic essay explores the possibilities to knowledge of God in the thought of Thomas Aquinas. The essay takes its departure from question 12 in the Summa Theologiae, specifically articles 12 and 13 that deal with natural knowledge of God and supernatural knowledge, respectively. It also presents objections made by modern philosophers against these ways of knowledge along with a rebuttal of these objections. Lastly, a conclusion is offered and ends with a reflection on how Aquinas' teaching on human knowledge of God in earthly existence compares with his teaching on the knowledge human beings will have in heaven and what consequences that has for our present knowledge..

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

In agricultural educations you learn to use different economic planning tools, as basis for decision. The purpose and goal of this work has been to find out if economic planning tools are used by the farmers in Sweden. We choose to do an investigation through personal interviews, and used an inquiry to get as equivalent answers as possible from the farmers. This work contains a literature study with relevant facts about the questions that is brought up in the inquiry. This study of literature explains shortly some different calculation methods and bases for decision. It also contains useable information that is important to know before an investment. The questions that are asked to the farmers have focused on the use of calculation methods and economical planning tools.

Three main questions give the fundamental structure for this master thesis: 1) In what way is the notion of law being perceived in the following theologians respectively; David P. Scaer, Dietrich Bonhoeffer and Wolfhart Pannenberg? 2) In what way is the notion of law being perceived in the encyclical Veritatis Splendor? 3) Which similarities and divergences can be found in the respective expositions of the notion of law?For the purpose of comparison, I have employed four questions of analysis. These are: A) What is ?the law?? B) Is the law being effected, or is it working, in the world and if so - in what ways and for what purposes is it meant to serve? C) Does human beings have any capacities to understand and/or live in accordance to the law? D) Does the Gospel, perceived as the earthly life, actions, death and resurrection of Jesus Christ, effect any alteration with respect to the purpose, range, function or interpretation of the law?In order to better understand Roman-Catholic concepts of law, the treatise on law of Thomas Aquinas Summa Theologica is briefly presented.

At Uppsala university scientists have during the last years developed and built wave energy converters. This project is called "Lysekilsprojektet". The development has come so far that they are currently investigating how to gain profit in a mass production. For that reason they want to automate as many steps in the production as possible.The winding of the stator is one part that is being automated using industry robots. The stator is cable wound unlike many other generators.

Det här kandidatarbetet kommer framförallt att beröra filmtekniken, Matte Painting, men vi kommer även röra oss runt omkring ämnet och presentera andra delar från filmproduktionen och framförallt postproduktionen för att lättare kunna sätta Matte Painting i ett relevant sammanhang. Vi jämför Matte Painting med en teaterkuliss, en bakgrund som på nära håll eller ses från fel vinkel kan bryta illusionen av att det är en verklig miljö. Vi undersöker och presenterar hur man kan bygga upp en digitalt skapad Matte Painting som möjliggör att inte behöva åka land och rike runt efter den idealiska filmplatsen, utan kan spela in filmscenen i en studiomiljö. Vi analyserar existerande filmscener som har använt sig av Matte Painting, gör jämförelser mellan olika användningsområden för Matte Painting samt diskuterar fram en slutsats som besvarar vår frågeställning: ?Hur har utvecklingen av filmtekniken, Matte Painting, sett ut och hur kan man tillämpa en digital Matte Paint i postproduktion för att förstärka helhetsupplevelsen av en filmscen?? --- This thesis will primarily concern the film technique, Matte Painting, but we will also roam around the subject and introduce other elements of the film production, and above all post production for ease of putting Matte Painting in a relevant context.

The way we interact with computers will soon change dramatically. The input interfaces are becoming more and more intuitive and one of the latest technologies is a touch screen interface capable of dealing with multiple inputs simultaneously. The tools we use to communicate with the computer - such as the mouse and the keyboard, will slowly disappear and be replaced with tools more comfortable and more natural for the human being to use. The purpose of this project was to create a basic framework for future projects dealing with this interface, as well as creating some example programs. This report describes my work and my experiences with this new interface..