In 2006, Stora Enso Skog implemented an education program in water management for harvester operators, timber purchasers, cut block planners and supervisors. The focus of the program was creating stream crossings with minimal harm to the stream and the surrounding riparian area. This main purpose of this study was to determine the difference in work procedures before and after participating in the program. The methodology consisted of field studies and interviews with harvester operators and their supervisors. The field study looked at how the streams had been crossed concerning the number of crossings, visible damage to the stream and/or the riparian area made by the machines. Biological parameters such as the width and dept of the stream and amount of large woody debris in the stream were also measured. The field result from 30 harvesting sites showed no significant difference between sites that had been harvested before or after the education program. But the harvester operators and their supervisors experienced an increased concern for watersheds after the educational program.

Abstract   This degree project comprises 30 credits, i.e. 20 weeks of work. The work mainly deals with the energy balance for a multi-family house in Västerås and the requirements for energy conservation in the Swedish building code, BBR. Calculations of the energy balance are supplemented by a number of interviews. Energy conservation in general has become more important in recent years and the subject is in line with increased public awareness. This importance and attention is explained by environmental problems in general and global warming in particular, but also by rising energy prices.

Då IT idag spelar en central roll inom i stort sett varje organisation ökar även kravet på organisationen att förstå verksamheten och dess processer och vilka problem man försöker lösa med hjälp av IT. I denna studie kommer vi försöka identifiera de problem som är kopplade till kravhantering och kommunikation i ett multi-nationellt företag där kravinhämtningsprocessen sker kontinuerligt snarare än projektbaserad. Vi kommer också att försöka föreslå lösningar på de problem vi identifierar. Datainsamlingen har skett via enkäter och intervjuer. Enkäten skickades ut till slutanvändarna av systemen och intervjuerna riktades till fyra nyckelintressenter i kravhanteringsarbetet.

Migrationsverket är en myndighet som prövar ansökningar från personer som vill söka skydd, ha medborgarskap, studera eller vill jobba i Sverige. Då det på senare tid varit en stor ökning i dessa ansökningar har tiden för vilket ett beslut tar ökat. Varje typ av ansökning (exempelvis medborgarskap) är en process som består av flera steg. Hur beslutet går igenom dessa steg kallas för flöde. Migrationsverket vill därför öka sin flödeseffektivitet.

This paper is part of the research programme ViSuCity, a programme with the goal of creating more sustainable urban planning through the development of better visual tools, which ultimately means better communication between various parties of public planning. The paper concerns the implementation of MCE into a 3D program for visualization. Multi criteria evaluation (MCE) is a technique that has been developed during the last 20 years. It merges GIS with AHP, forming a decision making tool for localization of, for example, new buildings.The result is an automated tool that enables advanced analysis of geographic areas.The tool has a very high potential due to the completely automated MCE and it is adapted for people without a technical background, let alone formal training in MCE. It provides great opportunities to test different scenarios, something that should be an important advantage.

Det har blivit mer och mer vanligt med ny, datoriserad teknik i hemmen. Fler människor har ett allt stressigare liv och inte längre samma tid att ta hand om det egna hemmet. Behovet av en hjälpande hand med hushållsarbete har blivit allt större. Tänk själv att komma hem från jobbet eller skolan och så har golvet blivit skinande rent utan att Ni knappt har behövt göra någonting! Det finns idag flera olika robotar på marknaden för detta ändamål. En av dessa är den autonoma dammsugaren, som är det vi inriktat vår uppsats på.

Sitka spruce (Picea sitchensis) is a tree species that have its natural distribution along the West Coast of North America, from Alaska in the north to northern California in the south. Sitka spruce is a typical coastal tree species that can reach heights up to 85 meters and occurs in single pure as well as in mixed stands. The main purposes of this study were to describe the Sitka spruce growing characteristics and the volume production in comparison to spruce (Picea abies). The possibility to predict future volume production by using prognosis tools designed to be used on spruce were also studied. The material that has been used in this study are permanent sitka trials established by the Faculty of Forestry fixed Sitka trials and also material gathered in this study. A literature study was also carried out in order to determine the Sitka spruce growing characteristics. Sitka spruce has a high adaptation and a high volume production on a broad scale of soil types. The tree species is a pioneer species that has a fast early growth and in combination with sharp needles it is less susceptible to animal browsing than spruce. The factor that is the single most limiting factor for where the Sitka spruce can be planted is frost. This factor can be limited by using plant material with a well-suited provenance. According to the literature, the Sitka spruce has an average total volume production that is between 20-40% higher than spruce.

In order to reduce greenhouse gas emissions from human activities fossil fuels will have to be replaced with renewable energy alternatives, such as bioenergy. Sweden has a great potential to produce bioenergy derived from forest products and there is currently a great interest within Sweden in using stumps for bioenergy production. However, the environmental consequences of the method need to be investigated before stump removal can be performed on a large scale. Swedish forest soils contain large carbon pools and a different land use may change conditions so that soils that presently act as sinks of carbon could potentially turn into sources of carbon release instead. This study investigates the initial effects of stump harvesting on the emissions of three greenhouse gases, carbon dioxide, methane and nitrous oxide. The emissions were measured from the soil surface in a Norway spruce forest located in the southern part of Sweden.

This thesis is a part of the project "Sustainable harvesting and storage of sugar beets, more sugar to practice". The work has included a large part of practical experimental work with weight measurement, graduation and storage planning. The aim of the project is to be able to see whether the cultivars react differently in different storage conditions. The project has included storage under controlled conditions to give as accurate results as possible. To be able to mimic the farmers own preconditions the samples was harvested with a conventional Holmer.This project has two parts, one concerning the nature, time and temperature on storage where a number of different cultivars where investigated during three different recording times, two different temperatures and controlled in a controlled environment.

The aims of the silvicultural method natural regeneration of spruce (Picea abies L. Karst) in birch (Betula pendula and pubescens) shelterwoods are to establish a new stand of tree seedl-ings and to protect those from high groundwater levels, frost damages and grass competition during its first life years. The aim of this work has been to (i) describe how shelterwood and stand characteristics influ-ence the results from using natural regeneration of spruce protected by a shelterwood of birch, and to (ii) compare those regeneration results with planting of spruce after soil scarification in clear-cut areas. Totally 17 harvesting sites have been inventoried and 15 of those included natural regenera-tion in birch shelterwoods, and two were subjects to soil scarification and planting of spruce. The sites represented 7-10 year old final cuts and are located in the coastal (eastern) region of the province of Norrbotten in Sweden. In all areas shelterwood and stand characteristics, as well as the number of main crop seedlings and the height of the highest main crop spruce seedling, were estimated and registered in all areas.

The shooting sport is one of the most widespread sports in the world and it isbeing practice in most countries. Based on their own experiences, in competition -and hobby shooting, the client M4Solutions found a demand and need for ashooting target that is manufactured in Sweden.The purpose of the project has been to develop, with the help of Marcus Walldén,two shooting targets from idea to finished product. These two shooting targets,Plate Rack Target and Dueling Tree, would each be equipped with a mechanicalresetting system but will in the future have the ability to be provided with anelectronic resetting system.The project from the client was divided into two theses. One of these two, writtenby Marcus Walldén, focused on the tripod parts and the overall design work forboth Plate Rack Target and Dueling Tree. The thesis that is presented in thisreport have focused on resetting systems, the design of protective plates and otherperipherals for both shooting targets.This work has primarily been in CAD environment where design, constructionand development has been given free rein.

The question is who should govern and administrate a municipality owned urban forest? Should societies and the public be invited to participatory planning, who are the interested parties, could they be treated like a group and what are their opinions on administration and management? The study is carried out in a municipal owned forest Vitberget Skellefteå that is widely used by associations and individuals for recreation and training.This has led to several discussions in the local media about the management of the forest, especially in connection to harvesting. The work undertaken here has been to identify who has any interest in the management of the area. After identifying the interested parties, a selection of the societies, schools and pre-schools that actively uses the area as well as random individuals met in the area was interviewed. The questions asked can be divided into six main groups:? Communication with the municipality?s managers for the area? Interference from other activities? Views on forest management? Views on nature conservation? The uniqueness of Vitberget? Development opportunitiesThe crucial factors identified as being needed to succeed in managing an urban forest are long-term administration, information and communication.

Multilayered woodland types are an important part of the urban forest. The knowledge how to establish and maintain such plantations are not as deep as other knowledge fields concerning forestry. Therefore this study has looked upon how to achieve multilayered structures in young nature-like woodland plantations. As a theoretical base for the study three different major knowledge culture have been studied that concerns the subject, ecology, forestry and landscape management/design. This three theoretical framework concludes that many natural processes strive in the opposite direction of multilayered structures in their youth.

The industrialized timber housing process is capable nowadays to build multi-storeyhouses since fairly new changes in the Swedish regulations where made after theadmission of the European Union in 1994.The industrialized process moves parts of the construction process into a highlyeffective factory where 3D-volumes of the building are prefabricated beforetransportation to the building site for assemble.The assembly process is relatively effective compared to the completion of thebuilding service system and this is therefore the main focus in this thesis. This thesisattends problems with completion of the building service system, and thereforedemarcates from other aspects, such as technical and economic aspects, of thebuilding service system.The degree of completion of the flats differs from completion of the connectivepassages, for example hallways, in a way that suggests a need for further investigation.This thesis includes analysis of the possibilities to increase the prefabricatedconnective passages, to the extent of containing building service systems.An increase of the prefabrication of the building service system has a greatdevelopment potential, even though some restraining factors need to be solvedbefore implementation.This thesis was made in collaboration with two of Sweden?s leading companies on themarket of multi-storey industrialized timber housing, Moelven ByggModul AB andLindbäcks Bygg AB..

This thesis is built on a field study that was carried out in two seed-tree stands near by Götbrunna in Uppland, Sweden. The aim was to examine if scarification carried out in spring time could generate a more dense seedling establishment when using natural generation, than scarification carried out in autumn. It was also investigated whether there were differences in mortality the first season between the two plot-types. Plots were established block-wise with 50 blocks (pairs) on each site. The spring scarification was made with a hoe during 22-23 of April.