This report describes the design and implementation of a multi-master, packet based protocol for small and tiny microcontrollers where resources are limited. The protocol was named "Tiny Controller Network" or TCN for short. The protocol is meant mainly as a control bus for automation and sensor acquisition applications but due to its flexibility can also be used for other purposes as well. It borrows some of its functionality and design ideas from the well known CAN bus and Modbus but also has a number of major differences like the use of standard hardware and time synchronisation. One of the key aspects during the design was the use of very little system resources and common on-chip hardware peripherals like a UART.

Compared to all existing ethnic groups in Sweden, the integration of Somali women has failed the most within the aspect of employment. This bachelor?s thesis investigates the obstacles in the integration of Somali women by focusing on one case, a project named ?Kvinnokraft?, partly financed by the European Socialfund.By interviewing eight key actors, opinions about obstacles in the project have been identified. A theoretical framework that incorporates integration, project research, multi-level governance and intersectionality contributes to explaining difficulties in integrating Somali women.The empirical findings show that there are individual, social and institutional holdbacks. Stereotypical perceptions were common amongst officials, which contributes to a creation of an inferior position in the structures of the society for Somali women.

A method for measuring the total impulse from a multi hole diesel injector, introduced inprevious thesis work, ?Development of a method and a device for measuring the momentumrate of fuel sprays?, by Mikael Lindström, has been further developed and tested. The conceptis to simultaneously deflect all sprays from a multi hole diesel injector by using a bell shapeddeflector. The fuel sprays are deflected straight down from their initial umbrella angle, andthe resulting deflection force is measured in a thin strained section of the load cell. The strainis given by three strain gauges, with quarter-bridge circuitry for each gauge.

Multi-Channel Network (MCN) a?r mediefo?retag som jobbar pa? plattformen Youtube. Deras affa?rside? ga?r ut pa? att para ihop Youtubeprofiler med fo?retag som vill annonsera pa? Youtube. I nula?get finns det tva? MCN fo?retag i Sverige, Splay och United Screens.

BACKGROUND: Project based structures has become more and more common in the organizations of today. As the project based structures are given a more central role in the organizations the interdependencies between the projects are getting more attention. These structures need a new type of control to meet the unique challenges that arise. The researchthat has been done has been concentrated around the project form and the projects internal control, the area of multi-project management is therefore relatively unexplored. The few existing studies on the subject focus on projects in the construction industry why research inmore complex fields of business have been requested.PURPOSE: The purpose of this thesis is to explore and analyze how knowledge intense multi-project organizations manage their project activities, and to determine how different organizational characteristics affect the need for management control systems.METHODOLOGY: The empirical data has been collected through interviews with personnel in BT Products R&D, Gambro R&D and AstraZeneca Development.

Future climate changes may lead to an interest of alternative and foreign forest tree species in order to spread the risks in forestry. Douglas fir, Sitka spruce, Freemont cottonwood and hybrid aspen are examples of popular foreign tree species that along with western red cedar could have a future in the Swedish forests.Södra Skogsägarna and SLU have collaboration in establishment of foreign species in Swedish forests.The purpose of this study was to analyze and present the establishment of western red cedar, and to survey and illustrate injuries of freeze drying and other damages like deer browsing, vegetation and insect attacks. The study included four different provenances, and spruce as a reference, planted in two locations ? Asa and Släne.Western red cedar is despite its name a conifer of the cupressaceae family with defined secondary characteristic and gets along well with an overstory. Western red cedar grows often in mixed stands with similar conifers and its natural habitat is within and in the area near to British Columbia.The study included two series of field inventories, one made in the summer and one in the autumn 2013, three growing seasons after plantation.

The forestry companies? operational planning process is these days dependent on reliable, efficient and user-friendly computer-based support systems. This study is an evaluation of Holmen Skog's current computer-based systems. The aim of this study is to: ? investigate the work pattern of the production managers when using the information system to plan the harvesting operation; ? investigate the efficiency and user friendliness of the information system with the different work patterns and to find the strengths, weaknesses and bottlenecks in the current system; ? find out if the type of object, the volume, the area of the harvesting object affects the time and work pattern; ? examine how this type of study is met by the employees and what factors that is critical to avoid feelings of intrusion. The conclusions of the study were: ? there is a large variation between the work patterns of the production managers and the time spend to perform the operational planning; ? the mainframe computer system used by Holmen Skog is clear, has short response times, is robust and conveys relevant information; ? the computer systems are however divided in many subsystems.

The construction and use of buildings in the EU accounts for half of the EU?s extracted materials and energy consumptions, and a third of greenhouse gas emissions. In the past decade, the construction sector has responded to such concerns by focusing on post production energy efficiency. However, new findings indicate that upstream construction processes influence emissions significantly ? necessitating a shift in focus to include material choices and building processes.

In January 2007 the Öresund committy changed its statutes to become a more politically oriented lobby organization. This change can be interpreted as one part of a continuously evolving process where the Öresund region is emancipating itself from the national states in a multi-level European environment. By focusing on this latest development the thesis puts forward the importance of political institutions, as well as politicians and civil servants as actors in them, as crucial factors in the process where the region is gaining political power. The thesis shows how the political cross-border cooperation in the Öresund region is being institutionalized which affects its power relations to other levels in the multi-level system, predominantly the national states. In other words, there is a connection between power and institutionalization.The Öresund committee has by gaining better access to policymaking agendas on the national levels proven that the organizational change has already started to bear fruit.

Stronger demand has been put on forestry to show environmental considerations during harvesting. This is especially for crossings of brooks with sensitive elements and great care should be observed when they are to be crossed during harvesting by logging machines. For that reason Hultdins has constructed a portable bridge that can be used for those occasions. The bridge has been developed in accordance with wishes from SCA forest, since they have a great deal of brooks in their forests and in private forests from where they buy part of their wood supply. The aim for this report is to investigate if this portable bridge can be of interest for the forestry market. The research has been made at SCA skog in Medelpad and Norrskog in Medelpad.

This paper examines how pupils with a non-Swedish background, in a secondary school in Stockholm?s suburban, Sweden, interpret and absorb the contents of school-room classes. It also examines whether the interpretations are influenced by a power-relation between teacher and pupils. The pupil?s interpretations, including their values and perceptions as regards to the content, are central to our study.Firstly, classes on world conflicts and corporal punishment for children were observed and these observations were the foundation to this study.

The background to the study is that within the next ten years about 50 new multi-purposeindoor arenas will be built. These are used for various events such as sports, concerts, etc. In order to achieve a high level of security in the case of danger alarm signals and alarmmessages must be heard well by the visitors. ÅF-Ingemansson wanted to show builders the importance of good speech perception and that it is not observed in arenas today. They conducted technical tests on two large multi purpose indoor arenas to develop parameters that affect speech perception in the arena.To get a subjective view of how these arenas are experienced a survey was created.

Det har blivit mer och mer vanligt med ny, datoriserad teknik i hemmen. Fler människor har ett allt stressigare liv och inte längre samma tid att ta hand om det egna hemmet. Behovet av en hjälpande hand med hushållsarbete har blivit allt större. Tänk själv att komma hem från jobbet eller skolan och så har golvet blivit skinande rent utan att Ni knappt har behövt göra någonting! Det finns idag flera olika robotar på marknaden för detta ändamål. En av dessa är den autonoma dammsugaren, som är det vi inriktat vår uppsats på.

This report describes the design and implementation of a multi-master, packet based protocol for small and tiny microcontrollers where resources are limited. The protocol was named "Tiny Controller Network" or TCN for short. The protocol is meant mainly as a control bus for automation and sensor acquisition applications but due to its flexibility can also be used for other purposes as well. It borrows some of its functionality and design ideas from the well known CAN bus and Modbus but also has a number of major differences like the use of standard hardware and time synchronisation. One of the key aspects during the design was the use of very little system resources and common on-chip hardware peripherals like a UART.

The sites I visit turned into routines a long time ago. Everywhere someone has decided what should be there and what will not fit. I retreat into my daydreams, away from everyday life. A longing for something different, something wonderful. I decided to go where I've never been, searching for something unknown.