This master thesis investigates the possibilities of using GPS-information from trains to create a model of a railway system, register the routes of the the trains and predict how the trains will travel in the railway system.The thesis work was done at Icomera AB which is a company that specializes in internet connected vehicle solutions.We describe how the GPS-information is sent from the trains in the form of samples and investigate limitations and possibilities with the available information. About three million samples from 83 SJ-trains were analysed and the samples were filtered with the intent of removing erroneous information. We here found that about 30 % of the samples from the trains were unreliable.A solution for how the samples from the trains can be used to create a model of the railway system traveled by the trains is presented. We use a large set of historical samples and use cluster nodes and Hermite curves to generate a graph that represent the railway system with stations, nodes and the railway itself. A fully automatic solution is not presented since it did not fit into the time frame of the thesis; instead we created a simple tool which can be used to manually finish the model of the railway system.Furthermore, we describe how the railway system and the samples from the train can be used to register the routes the trains travel.

With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

This thesis is an attempt to understand how the traditional female gender identity is constructed and what kind of structures that are maintaining it. I also study how this identity is reflected in young women's conception of themselves and in their views upon whether they should sign in to the military service or not.The theoretical framework that I use mainly consists of theories about gender construction, male dominance and the woman's role in the nation-state.The purpose of using this theoretical approach is to illustrate that the traditional female gender identity consists of characteristics that are in opposition to the male ones. The woman should be weaker, less aggressive and more caretaking than men- in sum she is defined as the Other. The structures that constructs this identity is the male dominance, also known as the gender system and the patriarchy.This traditional female gender identity and citizenship role that historically has been allotted to women in the nation-state is still today very vivant in Sweden and is reflected in the fact that the military service is optional for women. Certain parts of this identity is also reflected in the young women that I interview, in their sense of probably not fitting in to the military service, because of their sex and the characteristics discussed above, that are associated with it..

In today?s society it is not uncommon for people to move across borders. We are more likely to work and study in other countries, initiate cross-border relationships, acquire property in other states and change our residence. Therefore it is not uncommon for a per-son to leave inheritance in several states. The laws of succession differ between countries which creates an uncertainty among the devisors when planning their successions.

Context: During the 21st century several alarming reports have been published that deals with the depletion and pollutant of the earth by human interference. The earth is an ending resource and so are the mountains and bedrocks which are continuously mined in order to harvest its minerals. The idea behind Urban Mining is to (re)invent processes enabling further purpose for materials both from old deposits and new products providing secondary raw materials and energy. This thesis aims to investigate the challenges and opportunities of how firms and organizations can and will be able to strike a better balance between product-/service systems, economic growth and environmental stewardship in the context of Urban Mining as an approach. With the innovation of processes, technology, business- planning and creation in focus.Objective: How to future proof a business model for Urban Mining by the usage of business model design.Method: This thesis will be conducted using a case study approach, meaning that it will incorporate qualitative, exploratory and descriptive characteristics - aiming towards enabling both applied and fundamental research.Results: The result evaluates the business model element differences between traditional C&D industry and Urban Mining industry.

The thesis first objective was to develop field instructions for forest planning of native forests in Andean Patagonia, and the second objective was to test the plan on an actual property in the area. The thesis was limited to studies in the province of Rio Negro. Today, there are no official forest management plans for native forests in the Argentinean province of Rio Negro; thus, there is an obvious need for an official forest management plan with clear guidelines. To be granted permission to manage, i.e. through thinning, the native forests on a property it is required to have a forest management plan that is approved by the Forestry Board in the province in question (Thill, B.

SMC is in the process of developing a micro simulation model. The existing micro simulation model developed at Cornell University for US data, CorSim, is one of the fundamental parts for the new micro simulation at SMC. To develop the Swedish model, Swedish data on all individuals in Sweden during 11 years are also available. These data are organized in a database. This paper describes the process of rebuilding the database to a more useful structure.

This thesis evaluates the user board of the elememtary school in Veberöd, Sweden. In this process an evaluation model is developed. The model itself gets evaluated in a meta-evaluation to improve the model for future use.The starting point of the evaluation is the deliberative democracy theory. Although Sweden is a representative democracy an official desire exists to have a democracy with deliberative qualities. The evaluation model is constructed to fit this context and is therefore, not only, set out from classical goal-based evaluation but also from deliberative democratic evaluation.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

The credit rating industry is a complex and fascinating industry. Its history stretches back more than 150 years and has gradually increased in importance. During its history the dynamics of the industry have changed. The extended-principal-agent model was developed by synthesizing different principal-agent-relationships into one model. This model provides a holistic understanding of the credit rating industry and illustrates the interdependence between the different relationships.

After emergencies involving chemical spills it is of great importance that correct measures are taken with short notice, both for the security of people and in order to minimize future environmental consequences. The RIB-unit at the Swedish Rescue Services Agency initiated this study, the aim of which is to propose changes to the existing chemical transport calculation tool: Chemical Spill 3.4, included in RIB - Integrated Decision Support for Civil Protection, so that it can be used for decision support as well as in preventive work. A rough estimation of chemical transport in the subsurface is considered being of great importance when making decisions during emergency response operations.The proposition presented in this report is a non site specific chemical transport model which is designed to give a rough estimation of NAPL flow in homogenous isotropic soil shortly after an instantaneous release. The model can be used at two levels; both in situations without access to information on subsurface properties, and with more accuracy in situations with knowledge of the included parameters. For that reason the user can choose among predefined alternatives or assign the parameters a numeric value to increase the quality of the model output.

Calculations of net present value are based on a discount rate, which requires knowledge about the company?s cost of debt. A common way to do this is by observing the company?s credit rating, when no credit rating is given it?s possible to use a synthetic rating model based on quantitative data to estimate a credit rating. Thus, the aim of this study is to increase the understanding of which quantitative data, in terms of key figures, that can be used to explain the given credit ratings for companies from the Nordic countries.In developing the model, key figures found significant in previous studies are being tested for whether or not they are applicable for companies from the Nordic countries.

AimThe purpose of this study has been to help Åtvidabergs FF to find development opportunities by reviewing the internal communication and decision making process within the organization. In this study we have used two models, Johari window and Administrative man.Our study has two main questions. The questions at issues are:? Can Åtvidabergs FF with help of the communication model Johari window identify how the internal communication can improve?? Can Åtvidabergs FF use the Administrative man as a decision model?o Will the use of the model Administrative man lead to better decisions will be made?MethodWe have made a qualitative case study in a positivistic spirit. Data has been collected through half structured interviews.

This essay focuses on the construction of so called "computer game addiction" or "computer game abuse" in the Swedish press during 2000-2006. During this period computer game addiction went from an obscure phenomenon to a legit reason for the involuntary commitment of a fourteen-year-old.The study's theory is based on several social constructionist ideas. Kitsuse and Spector's theories about constructing social problems as claims-making activities are used for understanding the actions of the individual and groups involved. Hewitt and Hall's article about quasi-theory is used to explain the construction of explainations for the new social phenomenon. Blumer's five-stage model is used for categorizing the construction of the new social problem.

The ISO standard ISO/IEC 17799/SS-627799-2 is a guidance for organizations to realize their information security goals. In spite of this standard, studies show flaws regarding information security in organizations. In particular flaws regarding overall view, knowledge and clear roles and responsibilities have been observed. The ISIT (Information Security Integrated Three level) model and its guidelines, developed in this thesis, help organizations to identify the required processes and procedures as well as the logical process flow. The thesis is based on theoretical studies and a case study within a multinational company.