This report gives an overview of applications of the Greenroads rating system whichin turn is an environmental review system for roads. The focus of this report isapplications during the construction phase, ie on solutions which adhere to theentrepreneur's area of responsibility as opposed to the designer's. The study was undertaken in cooperation with Skanska (a global contractor andFortune 500 company) which provided a project suitable for an exemplatory study ofGreenroads. Please note that the project in particular was not specifically designedwith Greenroads in mind. Therefore and because of that the site provided anexcellent opportunity to study effects of application contra non-application. The approach of this study was to first review the system, thereafter to performinterviews with key personel at the site in different roles as to receive different viewsof selected points of application. Selected possibilities of application are cathegorizedand presented with comments and suggestions for adoption. Lastly Greenroads is briefly compared to the rating system which today is the mostwidely used by Skanska, LEED.

The purpose of the study was to examine if preferred stereotypical leadership and gender could predict women?s employability to leading positions. The survey, which was selfconstructed containing a scenario module was conducted on co-workers (N=97) in the Vaxjo area. The result showed that the female candidate in the scenario was preferred as leader prior to the male candidate. However, there were no gender differences between the male and female participants? preferred stereotypical leadership.

Title: ?The director should be treated with silk gloves.? A discourse analysis of the film director as a leader and a case study of a short film Seminar date: 19 February 2008 Course: Master thesis in organizational studies, 20 Swedish credits Author: Johanna Ranes Advisor: Ph.D. Nanna Gillberg Key words: Film, the film director, discourse analysis, social constructionism, gender studies, creative leadership. Purpose: The purpose of this study is to illustrate and problemize the consequences of the traditional male domination in film creation for a female director by critically examining the construction of the film director. Methodology: The study is based on a qualitative case study which was conducted as a participant observation.

On the 13th of June 2005 the Minister of Defence, Leni Björklund, was subjected to a formal complaint addressed to the Committee on the Constitution concerning her handling of a specific co-operation project with France. The project concerned the development of a technology demonstrator for an UCAV called Neuron. The reason for the complaint was that the Minister of Defence had failed to present the project to the parliament and thus bypassed a parliamentary decision. Such negligence might be considered unlawful under the Swedish Constitution. The issue became public during an unscheduled meeting with the Committee on Defence, a meeting that was arranged at the request of the Minister of Defence.

The Effects of dietary biotin supplementation on hoof health in Swedish dairy cows - a controlled cohort field study. The aim of the present degree project was to investigate the effects of biotin supplementation on hoof health in dairy cows. The experiment was performed as a controlled cohort study in three commercial farms in western Sweden from January 2002 to October 2002. The cows were all housed in cubicle systems with transponder concentrate feeding systems. Within each farm the cows were allocated to either biotin or control treatment. The biotin groups received 20 mg of biotin per cow and day, starting 14 days before expected calving.

This is a dissertation for a Bachelor Degree Project at the University of Skövde. The project is carried out in cooperation with the company Kinnarps AB.The objective of this project was to develop a new chair for café and lunch rooms, which should satisfy the markets expectations and demands and match Kinnarps AB?s assortment today. The project has contained everything from identification of user and customer needs and requirements to evaluation and building of a prototype.The result is a chair with a frame of tubular steel and there is nothing like it in Kinnarps AB?s assortment today.

The purpose of this project was to design an adjustable gutter bracket for Lindab Profil AB. Lindab currently manufacture a gutter bracket that is adjustable in angle, however, this model has some drawbacks.  One of it´s shortcomings is that it is somewhat difficult for the customer to mount.  Another problem with Lindab?s current model is that the design makes manufacturing unnecessarily complex. The new gutter bracket, that we have constructed, does not have these problems. It is adjustable for different roof pitches.

When it comes to the priority of a project proposal, a variety of factors is affecting theoutcome. In the municipal sector, factors of non- economic nature appears to be particularlyimportant when the organization is not intended to be profit-making.This study's research question is What problems can occur around an energy-efficiencyproject proposal in a municipal organization? The purpose of this study is to gainunderstanding of what possible problems an energy efficiency project proposal mayencounter, in the municipal implementation process as well as the problems of a changingownership can bring.To conduct this study, the method was qualitative in nature. We have cooperated withVarberg Energi AB and Varberg kommun, which has stood as respondents for the empiricalbasis of the study. In this study, we have conducted four personal interviews.In this study, we have found that there may be several problematic factors associated with anenergy-efficiency project proposal in a municipal organization.

This report is about how to decide which method is the most suitable as floor covering at projectKlammerdamm in the centre of Halmstad. The covering has to be fire resistant and soundproof inorder to protect the wood structure and stop noise from traveling between apartments. There aretwo possibilities either traditional gypsum board or gypsum-based self leveling underlayment.The roads around the construction site are narrow. A regular twenty-five meter long truck has nopossibility to reach the site. The construction site is small and the storage area is limited.

This report gives an overview of applications of the Greenroads rating system whichin turn is an environmental review system for roads. The focus of this report isapplications during the construction phase, ie on solutions which adhere to theentrepreneur's area of responsibility as opposed to the designer's. The study was undertaken in cooperation with Skanska (a global contractor andFortune 500 company) which provided a project suitable for an exemplatory study ofGreenroads. Please note that the project in particular was not specifically designedwith Greenroads in mind. Therefore and because of that the site provided anexcellent opportunity to study effects of application contra non-application. The approach of this study was to first review the system, thereafter to performinterviews with key personel at the site in different roles as to receive different viewsof selected points of application. Selected possibilities of application are cathegorizedand presented with comments and suggestions for adoption. Lastly Greenroads is briefly compared to the rating system which today is the mostwidely used by Skanska, LEED.

Indoor Energy is a company that works in the energy sector. It works through itsthree subsidiaries Indoor Energy Services, Indoor Energy Control and Indoor EnergyConsultants. Because of their comprehensive experience and offering of broad rangeof services they can contribute to integrated extensive solutions for their customers.Indoor Energy Control works with building management through control andregulation. This work is realigned by programmers and project managers. Working inthis area is complex and places a great demand on both technical innovation andprofessional project management.Due to the complexity of the work Indoor Energy Control has a hard time to get thenew employees to be independent in their work as a programmer.

This degree project has been carried out by Oscar Adolfsson and Marcus Blomqvist, during the spring of 2010, both studying to become Bachelor of Science in Innovation and Design Engineering, at Karlstad University. The degree project includes 22,5 credits.The work is done on behalf of Etac Supply Center AB in Anderstorp. Etac is a company developing and manufacturing home health care products, with operation in Sweden, Norway, Denmark, England and Germany, and with sales worldwide. Bo Lindqvist, R & D manager has been the contact person at Etac.During the project the students has had a workplace at Semcon Caran AB in Karlstad. Semcon has also been helpful as a sounding board.The objective of the work has been developing a new, wall mounted shower chair, assigned for persons with difficulty to stand up while showering.Etacs requirement of the shower chair is that it should be able to support a user with a weight of 100 kg, the chair shouldn?t have any outrigger, optional should be armrests and backrest.

The Degree Project is about ?creative packaging?, the group has in collaboration with AssiDomän Frövi planned, constructedand designed two packagingsolutions for chocolate creams.The group has worked with the cardboard Frövi Bright produced by the company itself, which together with differentaspects in marketing demands deep knowledge about the chosen material and productgroup.The knowledge wererecieved from education, litterature and personal contacts.The completed packagingsolutions will be exposed in connection with an exhibition this summer.The Degree Project has resulted in two new and completed packagingsolutions for chocolate creams. One is mainlycreative and the other one provides strenghtness with the chosen cardboard.Hopefully the result by the group represents AssiDomän Frövi in a pleasant way and increases the expectations forthe future..

This is a product development project which has developed a prototype in order to facilitate for people using mobility devices when they want to buy a larger quantity of groceries. The prototype is a shopping cart composed with the upper part of a walker.Today there are many different types of mobility devices used by elderly and people with physical impairment. According to Myndigheten för samhällsskydd och beredskap (MSB) are accidental falls the most common cause of accidents in Sweden.This project has been using Computer Aided Design (CAD) as a tool to create a visual image of the prototype. The advantage of this is to modify the functionality and performance of the prototype on the computer before the modification takes place in the real model. Using human manikins, the CAD model was rendered in natural surroundings to get as true a picture as possible.

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..