In published studies it is found that the fuel consumption on a forwarder is relatively constant, on time basis. A certain variation between different sizes of forwarders occurs as well as between different working elements. The aim of the study was to establish a forwarders comparatively fuel consumption when driving on road and in the terrain, loaded and unloaded, with high and low gear and with high and low speed as well as with hydrostatic and hydrodynamic transmission. A hypothesis was that low rpm gives lower fuel consumption on distance basic, at all trials. The test driving was made with a Hemek 750 which is a three geared hydrostatic machine and with a Hemek 700 which is a hydrodynamic machine with six gears.

When harvesteing ley there is always mechanical losses from the harvest machines. During the last years the roundbalers with knives,cutting the material-are more common, This use increase the mechanical losses of material. MATERIALS AND METHODS The roundbaler which used in this test was a Krone Vario Pack 1500 Multi Cut. This roundbaler has 17 knives. The theoretical length of cut was 64 mm. During the test we stretched a rubber tarp under the balechamber and collected the materials which fell down from the balechamber.

Today, pigs are moved on farm, between farms, between countries and to abattoirs. This movement of live pigs requires handling practices that are designed for the purpose. The objective of this study was to research the use of paddle in moving pigs, to investigate if there were different methods of paddle practice, explore the time efficiency of different kinds of paddle use and if there were any time variations in methods that varied in intensity of touch. This study was done on two Swedish abattoirs for a total of five weeks. A total of 22 transporters working at two different abattoirs where studied during unloading of pigs at the abattoirs.

In today?s modern age, energy consumption has become a major issue, both from an environmental viewpoint and cost perspective. Because of a rapid technologic change and increased costs of production of electricity, the demand to develop effective methods for energy efficiency industries have grown.The electricity-intensive industries, such as plastic industry, the demand to reduce energy consumption has grown significantly over the past 10 years, which have led to the development of different methods to determine and locate energy-consuming parts in the industry. This also means being able to prioritize and organize activities in the industry.In this study the measurements of voltage, current, power and PF performance on injection molding machines (K-TEC 275 form Ferromatik Milacron in Germany) with a focus to locate, within a machine, various measures that could improve energy use in the plastics industry, in this case RostiGP in Gislaved. These measurements have been carried out with the help of a power quality clamp meter to carry out time logs of the machines for some time during normal word rate.

Nowadays the majority of the thinnings made in Swedish forests are done by machines, harvesters and forwarders. The most common model in thinning with a harvester is strip-road operated thinning and stand-operated thinning with one intermediate passage between the strip-roads. This study is a time study with some quality follow ups on a strip-road operated thinning model, a stand-operated thinning model with one intermediate passage between the strip-roads and a stand-operated thinning model with two intermediate passages between the strip-roads. The machines in the study were a small harvester (Forestline MPM C90) and a medium sized forwarder (Timberjack 1110). The study was made in Litsnäset outside the city of Östersund in Sweden and was made during the autumn 2007. In a lodgepole pine stand six study units (0,6 ha) were thinned with the three different models, two study units per model.

When harvesting ley you hope to get a fast drying and a faster harvest. If there is a system with round bales, you need to have a dry matter close to 45 %. To make this as fast as possible, there is made a machine which pick up the grass with an pick-up. It turn the grass over and put it behind the machine (figure 2 and 4). There are few tests to prove the efficiency of this machine.

Deposits can be formed in the paper machine due to sticky materials from wood and recycled paper. These deposits get stuck on process equipment and cause the product quality to deteriorate and the efficiency of the paper machine is reduced. The purpose of this thesis is to increase the understanding about deposits among machine operators, and to suggest methods that can be used to reduce the amount of deposits formed in Bravikens paper machines.To fulfill the purpose of the thesis a pre-study, a literature review and interviews with machine operators and production staff, were carried out. These methods led to the planning and creation of an education about deposits for machine operators.The education about deposits for machine operators consisted of an interactive lecture to introduce the subject of deposits and a subsequent discussion. This approach was chosen to give the machine operators the opportunity to discuss their work situation on the paper machines related to their new knowledge about deposits.

There is a need for productivities data and data for different types of machines for comminution of logging residues. The lack of data and studies on GROT comminution makes it difficult to evaluate different chains for handling of residue fuels and make system analyses.Four types of machines with three different working principles were compared at six studies during winter conditions. Three to eleven trials during 9.5 to 30.7 minutes were made on each machine. Samples from the produced material at each study were sieved to determine the size distribution of the comminuted material. Samples were also taken from the studies for determination of moisture content.

This bachelor?s thesis examines costs of welfare services in municipalities of the region of Västra Götaland in Sweden. Previous research provided reasons to expect a link between costs of welfare services and demographic changes. Furthermore, Willam J. Baumol?s theory about ?the cost disease? also provided reasons to expect a link between welfare services and salary levels.

Examensarbetet har haft som syfte att utifrån dagens montering ta fram ett förslag på hur ettoptimalt monteringssystem kan se ut med avseende på effektivitet och flexibilitet på befintligyta.En beskrivning av nuläget har genomförts med hjälp av observationer och intervjuer. Efter attdagsläget analyserats har ett flertal förslag tagits fram, dessa har sedan utvärderats mellanförfattarna. För att nå en slutgiltig lösning har utvärdering skett med handledaren på Moving.För att få inblick i olika monteringssystem har författarna utfört benchmarking inom olikabranscher. Detta har sedan använts som uppslag i den detaljerade utformning för att få framdet bästa möjliga resultatet.Projektet har resulterat i ett slutgiltigt layoutförslag samt hur en bra monteringscell enligt dekrav som finns och då främst med tanke på flexibilitet ska se ut. För att påvisa att dessa nyaidéer kan öka produktiviteten och effektiviteten i Movings montering har en ekonomiskkalkyltagits fram.

During the cultivation season there are a several cropping activities to carry out. At what time these activities are carried out is affecting the result and also on the economy of the crop production. As the production costs are high in potato production, it is important to keep an eye on the economy. Profitability is the most important factor in most crop production systems. If the costs are not covered, it is difficult to justify the production.

During the cultivation season there are a several cropping activities to carry out. At what time these activities are carried out is affecting the result and also on the economy of the crop production. As the production costs are high in potato production, it is important to keep an eye on the economy. Profitability is the most important factor in most crop production systems. If the costs are not covered, it is difficult to justify the production.

The object with this thesis is to evaluate which of the catch crops oil radish and white mustard in combination with establishment method, give the most effective nitrogen uptake. The main purpose of the catch crops is to reduce leakage of nitrogen. They are sown after the main crop and killed before the next crop. In Sweden the farmers gets subsidies to establish catch crops. The thesis is limited to the trail L3-9010 sited at HS- Malmöhus, Borgeby Gård, 237 91 Bjärred, Sweden, 2007. Only treatments with oil radish, white mustard and the reference treatments were studied.

The aim of this study is to describe a number of type stands of lodge pole pine in Norrbotten with respect on stem volume and total biomass. Further questions to answer is if there is stand characteristics that make the stands more suitable for pulpwood in early thinning, or if it is better to apply whole tree harvest. The study shall also give an indication if bio energy can be an economical interesting alternative for Sveaskog. Sampled trees represented the variation in the different stands. Five trees were selected from each stand to represent that stand. Stem volume and biomass (kg dry weight (DW) per hectare) for each fraction was calculated.

Forest enterprises have always searched for ways to improve efficiency. For the past few years there has been an emphasis on stock-keeping levels. Increased demand for fresh round timber and the need to decrease the amount of tied-up capital has made the forest industry reduce its inventory levels. This has brought on a higher demand on the timber supply from the forest management districts concerning both delivery in time and assortment output. As a result, the flow of timber has fluctuated a lot with serious consequence for the timber supply during 1994.