This thesis uses ten years of data to examine the underlying drivers behind changes in the taxi price, specifically we look at the relationship between the taxi price and changes in the underlying costs. We use a two-step error correction framework to investigate how changes in costs affect prices in the long run as well as in the short run. We also study if the price adjustment process is asymmetric. Furthermore, we examine if price discrimination exists on the taxi market in Stockholm. We find that in the long run the pass-through effect is almost complete, whereas in the short run prices are considerably less sensitive to cost changes.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

This report is a study made at Pallco AB. Pallco is a subcontractor that is specialized on steel and aluminium components.The aim of the report is to show an improvement proposal that leads to a reduction of the storage and improve the flow through the production of one item that is a part of a product that Pallco manufactures.With the increasing competition from other countries who can manufacture with lower costs must Swedish companies try to make theirs manufacturing as efficient as possible and remove all waste. By using the tools of Lean Production it is possible to reduce the costs and increase the efficiency.The method we used is value stream mapping. A map of the present condition has been made and then different improvement proposal were discussed. A map of a future condition has also been designed..

Forest streams and the associated riparian zones are sensitive to disturbances and changes that occur within these riparian areas. Particularly sensitive are small streams of low order, which will have large impacts down-stream. The disturbances that occur in the riparian zones are reflected quickly in the stream. Driving with forestry machines in the riparian zone will have detrimental effects to the soil and water. Driving the machines will lead to changes in the mineral soil composition, resulting in the reduction of porosity, less infiltration, compaction, and an increased bulk density.

Human-animal interaction is suggested to be a main feature within livestock production. The quality of handling, for instance, appears to be greatly depending on the attitudes and behaviour of the stock people. Various studies have been conducted on relationships between human and animals, but few have looked upon differences in human-animal interaction and attitudes between countries. Two countries often discussed in livestock production are The Netherlands and Sweden. It would be of interest to compare these two countries to find out whether (assumed) differences are reflected in the attitudes between animal handlers.

The background to this final thesis is that our mandator, A-hus, was interested to examine which roof system that would be most appropriate to their types of houses. To investigate this, we first conducted an evaluation of the most commonly used roof systems in Sweden today: decking, board, roof cloth and prefabricated roof cassettes.To gather information about the different systems we have conducted interviews with several professionals within the construction industry, done an extensive literature study, and gathered information from the Internet.Based on the evaluation of roof systems and the literature, we analyzed advantages and disadvantages of the roof systems from three main perspectives: system characteristics, economics and other characteristics. We found these perspectives to be the most relevant when selecting a roof system.The main perspectives comprise three categories which are graded. These grades are then added together for a score for each main perspective and a total score for the three main perspectives. Then we compared the systems and, based on the scores, suggested one roof system as the most suitable for A-hus.Our result suggests that the prefabricated roof cassettes probably is the best solution for A-hus, but only if it is possible to standardize the cassettes and still maintain the flexibility to match A-hus? house types.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

During its lifetime, a road goes through a number of different stages; pre-study,inquiry of the road, work plan, documenting stage, building stage and operatingstage. The operating stage is the one that takes the longest time and costs themost. Those have a tendency of becoming unnecessarily high because the projectengineers don?t always take the management and maintenance prerequisites intoconditions.To decrease the management and maintenance costs, the Swedish RoadAdministration SouthEast has been in need of a work procedure that makes theroaddesign engineers take the management and maintenance of the road intoconsideration. This shall be achieved by a checklist where the most commondesigns that lead to increased management- and maintenance costs are compiledand listed.Through interviews with project leaders in management, the most commonproblems have been identified, analyzed and summarized under the headlineswinter-road, vegetation, road equipment and road designs.To elucidate the problem from several points of view, interviews wereimplemented with project leaders in investment and roaddesign engineers.

Purpose: During the last years Real Options have been established in many areas of the day-to-day business. Recent literature also tries to address Supply Chain problems with option theory, since an efficient Supply Chain increasingly gains in importance as a significant competitive advantage. This thesis tries to answer the question, if Real Options can mitigate the costs induced by the Bullwhip Effect as one of the major problems in Supply Chains. Methodology: The authors of the thesis used a deductive approach. Based on a theoretical model utilizing Real Option contracts and under the usage of a randomly created dataset the influence of the Bullwhip Effect on the company?s business and financial structure is examined and subsequently analyzed.

Thinning is the partial removal of trees in a forest stand prior to final harvest. The term can be divided in pre-commercial thinning where little if any volume is removed from the stand and commercial thinning where removals are intended to provide a positive economic result. From a silvicultural point of view, the goal of thinning is to enhance future crop tree quality by removing low-quality stems and providing sufficient space for the accelerated development of retained ones (Huuskonen & Hynynen, 2006). The goals of this study was to see if commercial thinning could positively affect the short and medium term timber supply (MTTS) in the Interior regions of British Columbia (BC), and whether or not Scandinavian forestry practices could be adopted in the BC context. The mountain pine beetle (Dendroctonus ponderosae Hopkins) has created significant forest planning problems in BC. The annual allowable cut (AAC) was raised to capture beetle-killed timber while still merchantable.

 The aim of this essay is to examine if the Swedish Major labels are moving towards making their catalogue available on different platforms rather than their traditional distribution of music. The new technology has really stirred things up for the major labels and file-sharing has been a problem for a long time. The labels have a history of fighting new formats instead of embracing them and listen to what their consumers actually want. We have found that the majors now are in the leading edge of music distribution due to technology and that is a first. We have focused this essay on if the consumption of music has changed the distribution of it or the other way around and found that people have changed their ways of consuming music over the years and the labels have always been forced to adapt.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The scarcity of qualified forest machine operators as well as the increased competition for competent machine operators among others from the mining industry in Norrland, were the reasons to investigate what attracts and what deters active and potential forest machine operators to the occupation. An interview study was conducted among four groups with four persons in each group. The groups were students in year 1 and 3 respectively at a forestry school at upper secondary school level as well as employees of a forest company and employees of contractors. The majority of all respondents were of the opinion that their interests in machines had been important for the choice of occupation. But for the active machine operators both the interest in the forest and their interest for machines have had importance for choosing this occupation.