In this report female farmers use of technical equipment is investigated. There is little research made on this subject in Sweden, therefore this report can be seen as an explorative study. Research makes it clear that machinery, throughout history and even today, has been seen as a male area. Heavy machines are often associated with the same attributes as masculinity. Force, power, efficiency and control are some examples.

Profit in first commercial thinnings of today is hard to achieve. This is because of prevailing pulpwood prices and because of high costs of logging and transport. To reduce these costs higher productivity is advocated. One way to increase the productivity is the use of multi-tree handling harvester heads. The aim of this study was to calculate logging and transport costs in first thinnings, where multi-tree handling has been used.

The aim of this report is to analyse the use of the capacity at the CNC (computer numerical control) cutters and show how the level of set up time for these cutters at Stålöv AB. This assignment is concrete whereas there are no subjective questions to this matter and there are only cold figures presented.Production economy is getting more important as the competition hardens and there are several different ways to increase productivity and efficiency in a company. In order to increase productivity and efficiency work studies are used to, through an analysis, find developments in methods that result in improved work methods and to establish the time that are used. Increased production of different parts and customer driven production in combination with increased demands on rationalisation of capital have led to an enlarged interest for shorter set up times in the production.To point out the use of capacity and the set up time of the cutters at Stålöv AB we used frequency studies. Frequency studies are work measure methods based on random observations on predetermined events to calculate the relative occurrence of these events.

This thesis analyses the cost accounting system KPP and its use within the Swedish health care. KPP is designed to calculate and assign health care costs to individual patients. This would facilitate evaluations and comparisons of the costs for certain diagnosis, patient groups or clinics with a different mix of diagnosis. The study investigates the following questions: 1. Does the KPP-model theoretically work as a cost accounting tool for health care purposes? 2.

Earlier attempts at mechanising pre-commercial thinning have been met with varying degrees of success. Most attempts have been based on techniques where residual stems are straddled. Early treatment is essential to limit damage on residual trees. One part of the present study is an evaluation of mechanised pre-commercial thinning using the new Vimek 404R. Vimek 404R is a fairly small machine that permits selective removal of stems, making it potentially suitable also for areas overdue for pre-commercial thinning. The study established the level of performance for the machine, as well as the improvement needed to make it an economically viable option.

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

With growing economies and better living standards in many parts of the world today, there is a need of expanding the capacity of generating electricity. The alternatives for renewable energy technologies are not fully developed and have still some problems to conquer.The company Minesto has developed a technology that is called Deep Green. It is designed to gain electricity from tidal currents. Deep Green works in a similar way as a kite that is attached to the seafloor with a moving wire. It contains of a wing that moves due to the water current.

In this report female farmers use of technical equipment is investigated. There is little research made on this subject in Sweden, therefore this report can be seen as an explorative study. Research makes it clear that machinery, throughout history and even today, has been seen as a male area. Heavy machines are often associated with the same attributes as masculinity. Force, power, efficiency and control are some examples.

The purpose with this literature study was to investigate the possibilities for improvement of forage protein in dairy cows with focus on feeding strategies and conservation of forage protein. The utilization of forage protein in dairy cows is often not that efficient as it could be. The feed crude protein consists of both true proteins and non protein nitrogen. The digestion of proteins in the rumen depends on the protein degradation rate and the ability of the microbes to synthesize microbial protein. The microbes need a balance between carbohydrates that provide them with energy and proteins that are degradable in the rumen.

Background and purpose: Volleyball requires a lot of the human body, andeffective core stability is necessary for the athlete. Our muscles cooperate as achain of motions and core stabilization is the base for the moving muscles.The most well-known stabilization muscle is m.transversus abdominis (TrA).The purpose of the present study was to evaluate the function of TrA inSwedish female elite volleyball players and to observe the influence of eightweeks of stabilization exercise on the TrA. Method: 10 female elitevolleyball players (mean age 24,7 years, range 18-31 years) participated inthe study. TrA was measured in supine position with a pressure biofeedbackunit. Subjects were instructed to draw in the abdominal wall without movingthe pelvis and hold for 10 seconds.

Every year, KTH participates in the Shell Eco Marathon, a competition whose goal is to design a vehicle that can go as far as possible using only the equivalent energy of one liter of petrol fuel. This year, one of KTH?s contributions to this race is the Agilis prototype; a car powered by a uniquely configured HCCI-engine developed at the university. The engine is dependent of several subsystems in order to work properly, among other, systems for cooling and lubrication.Combustion engines are in need of a cooling system that reduces the heat developed during the combustion. In general, two main types of cooling systems are employed; either air cooling, where the outside of the cylinder is exposed to a flow of the surrounding air, ore water cooling, where water flows in tubes around the engine, and the heat are transferred by the water to the surrounding air through a heat exchanger.The purpose of the lubrication system is to prevent the friction that builds up in the interference between moving parts in the engine.

The structure and performance of grocery distribution in Sweden has changed profoundly since the second world war. Increasing access and usage of the private car, in combination with an accommodating town planning has enhanced the exploitation of scale economies within distribution firms. There is, however, some ambiguity concerning the overall efficiency of the distribution system when the costs associated with travelling and purchasing performed by households are treated as an integrated part of the total distribution cost function. The purpose of this master thesis is to develop the foundation of a spatial optimisation model, which defines the most efficient distribution system. The underlying idea is that the optimal localisation and size of grocery stores is a function of economies of scale within the firms weighed against distributions costs within the households, such as transportation costs.

With the increasing costs in concentrate the importance in producing ensilage with a high quality is becoming more and more important. To succeed with this goal it is of importance not only to harvest in the right period, but also to be able to store the ensilage without a decrease in quality and nutrional values. To maintain a good ensilage the covering of the ensilage must be carefully made. An unsuccessful covering causes mould to grow in the ensilage, which both increases the work load and also increases the amount of feed which is wasted. A bigger amount of spoiled feed also increases the risk of feeding spoiled feed to the cattle.

The objectives of this research were to determine whether the natural rattan resources in Sulawesi, Indonesia can cope with the strongly increased harvesting pressure that has occurred over the last centuries. I was furthermore looking for patterns in the rattan population dynamics that might give a hint on how the harvesting system could be improved to ensure a maximum sustainable yield. To answer these questions, I developed an individual-based model to analyse the dynamics of rattan growth in connection with rattan harvests by locals to identify sustainable levels of rattan harvests around villages in Sulawesi, Indonesia. Scenarios with different harvesting intensities were run to compare the change in harvest amount. For a given harvesting pressure, scenarios with a high number of harvesters and a low harvesting frequency had the same effect as scenarios with high harvesting frequencies and a low number of harvesters.

The purpose of this study is to answer how teachers look at diversity in groups, with learning in focus. For this study I chose different high-schools in Sweden teaching Moving Pictures, in Swedish 'Rörlig bild'.These are the research questions: 1) What advantages and disadvantages do the teachers see with homogenity and heterogenity in their groups? 2) Which ascpects of teaching do the teachers bring up when talking about diversity?The method of this study has been a qualitative analysis and investigation in questionnarie form, with qualitative questions. Teachers were asked and data was examined with help of theories in diversity, group work, group dynamics, homogenity and heterogenity by authors like Toseland, Jones and Gellis (2004), Forslund Frykedal (2008) and Hammar Chiriac (2008).It is noticable that the teachers thought of differences in terms almost exclusively of school ability. The result is: - As a whole: homogenity means security, heterogenity means creativity.