Sökresultat:
1272 Uppsatser om Moving a collection - Sida 29 av 85
Inventering av förorenad mark på LKAB's industriområden i Kiruna, Svappavaara och Malmberget
The county administration asked LKAB to make an inventory of possibly contaminated sites caused by their mining activity. The inventory should be performed according to the MIFO model, a method from SEPA which is used to assess a contaminated site. The first phase involves collection of information through interviews and site inspections and in phase 2 a general survey with field sampling is conducted.LKAB started the work with the first phase of the survey during 2003. During this project the information collected in Phase 1 was evaluated and 16 of the sites were chosen to proceed to MIFO Phase 2 (six sites in Kiruna, and 5 sites respectively in Svappavaara and Malmberget). The sampling of these 16 sites was performed during week 27 2004.
Inventering av förorenad mark på LKAB´s industriområden i Kiruna, Svappavaara och Malmberget :
The county administration asked LKAB to make an inventory of possibly contaminated sites
caused by their mining activity. The inventory should be performed according to the MIFO
model, a method from SEPA which is used to assess a contaminated site. The first phase
involves collection of information through interviews and site inspections and in phase 2 a general survey with field sampling is conducted.
LKAB started the work with the first phase of the survey during 2003. During this project the information collected in Phase 1 was evaluated and 16 of the sites were chosen to proceed to MIFO Phase 2 (six sites in Kiruna, and 5 sites respectively in Svappavaara and Malmberget). The sampling of these 16 sites was performed during week 27 2004.
En undersökning om följsamhet till basala hygienrutiner och kläder på en akutmotaggning : en kvantitativ observationsstudie
AbstractHygiene plays an important role in health care to prevent contamination. Their lack of application of the basal hygienrutinera is a major cause for the spread of microorganisms occurs. The purpose of this study is to examine how rules of basic hygiene and clothing followed in the emergency department a quantentative approach involving the observation was to collect data on this activity. The data collection went on for 1 week at the emergency room, where hospital staff including doctors, nurses and assistant nurses was observed. The study showed that staff at the emergency department did not fully comply to the rules for basic hygiene routines.
Nominalfrasers inverkan på återvinningseffektiviteten i ett probabilistiskt IR-system
The purpose of this study is to examine the difference between three query strategies with respect to retrieval effectiveness. The thesis aims at examining how two types of noun phrases containing a modifier to the head word, which is a noun affect the retrieval performance with regard to recall and precision. The noun phrases in the thesis are of two types: 1) noun phrases containing a modifier to the head word (which is a noun) and which are not dictionary phrases (NF) and 2) dictionary phrases. Both types of noun phrases in this thesis contain at least two words. The queries were executed in Query Performance Analyser, QPA, containing the InQuery system and a sub collection of TREC-Uta documents with its topics.
Expansion av sökfrågor med Svenskt OrdNät som termkälla
The purpose of this Masters thesis is to examine the performance of queries that are expanded by synonyms and hyponyms from Svenskt OrdNät, the Swedish version of the Princeton WordNet. Four different types of queries were constructed: a baseline query S1, the baseline query expanded with synonyms S2, the baseline query expanded with hyponyms S3 and finally the baseline query expanded with the synonyms and hyponyms used in S2 and S3. The terms for expansion were picked by hand. The queries were executed in the Query Performance Analyser QPA, a tool used in IR education and in experimental IR research for analysing and comparing the performance of individual queries. 20 topics from the test collection GP_HDINF were chosen for the experiment.
3D-Visualisering som hjälpmedel i modern planering : En utvärdering av verktyget City Planner med hjälp av fokusgrupper
Public participation is a key aspect in the planning of Swedish municipalities. It is probably the most important tool of them all in the planning towards a sustainable future within the cities and the municipalities as a whole. Participation from the public can take on several different forms. In this paper I focus to research and discuss in and around the usage of a web-based 3D platform called City Planner. The tool allows the user (the public) to view the municipalities planning in a fairly new (but quickly growing) environment.
Standardisering av funktionsblock for PLC
Automationscenter & Bråvalla Elteknik AB is a company that offers the market completed total solutions where the customer can operate and monitor their production from the terminal. In these total solutions they lack standard circuit which are developed by the company and which could manoeuvre/control/monitor controlled process objects. This report defines the work of developing the most common standard circuits.The report is initiated by a short theoretical part about PLC and the PLC system, with a connected terminal, which has been used. Thereafter, the turnout of the demands of specification is reported, after discussing with the supervisor in the course of the project. The report concludes with a disclosure of how the programming, the documentation and the testing have proceeded and a final discussion concerning the project and proposals on continuation.The result is a CD with the documentation of standard circuits and how they are implemented in a new project.
Reglering av användningen av webbrobotar : En kvalitativ studie om synen på webbrobotar
Regulation of web bots is an analysis of the interest and a collection of discussions about the phenomena web bots. The section that contains the result from the interviews brings up the question about ethical and legal actions and the opposite to those. How the regulation could work is also discussed in the section with the results from the interviews. The discussions were produced by people whose background in one case or another can relate to the phenomena web bots. In that way this study was limited to few, but more profound interviews which would enable analyses of web bots existence.
Generationsfonder : En jämförelse mellan generationsfonderna i Sverige
In the future the Swedish pension system will face major problems. With an increasing aging population combined with a decreasing share of working population the financing of the pension system is becoming a bigger problem than previously predicted. This means the individual himself will have a bigger responsibility to invest money for their future retirement. It has been shown that a large proportion of the people who invests for their future pension have neither the interest nor the time to actively invest their pension capital. To make it easier for those who invest for their retirement, some Swedish banks have created so-called generation funds.
Robotiserad produktionsanpassad magnetmontering för vågkraftverk
This thesis work includes studies and simulation how magnetization of the translator in a linear generator for wave power can be automated. The translator is the moving component in the generator that is "dressed" with permanent magnets. The translator is magnetized with rectangle-shaped permanent magnets that are today's strongest permanent magnet type of neodymium-iron-boron (NdFeB).Eight equivalent metal sheets are mounted around the translator. The plates have milled tracks where 106 permanent magnets per sheet are mounted. Today the assembling of the magnets is done by hand, which is a very tedious and time-consuming work. This project presents investigations about the automation of the translator magnetization theoretically and simulation results are preformed in ABB's robot simulation software RobotStudio. Even robot-held tool was designed that enables the robot to be able to magnetize the translator in a simple manner. The investment cost is roughly 1.5 million SEK. With an economic life-time of five years, the investment costs are estimated to 24000 SEK / month. According to the calculations, this project is very motivated to implement, as it provides savings up to 17 000 SEK per translator which is 10.2 million SEK assuming that the robot cell is operating at full speed the whole year.According to this thesis work the result is a 4x9 meter cell with two industrial robots of the type ABB IRB6650S.The cycle time to magnetize one translator was calculated to about 10 hours.This prototype of project can possibly be implemented in a full-scale production line and performed according to the calculations and simulations presented in the report. Further work is suggested to improve the tool.Lyssna .
Tillfällen då hemodialyspatienter anser det vara svårast att undvika vätskeintag : En empirisk studie
The aim of this study was to investigate which situations haemodialysis patients consider as the hardest for avoiding fluid intake. The data collection was performed with a questionnaire which was distributed to haemodialysis patients who fulfilled the inclusioncriteria. Of 158 haemodialysis patients 103 haemodialysis patients chose to participate in the study. The participants were chosen from different dialysis centres (n=12) in north and south of sweden, excluding the middle of Sweden. The questionnaire that was given out consisted of 32 situations, the response format included nine alternatives, that included different kind of difficultes.
Near Field Communication : En studie om NFC-teknikens möjliga användningsområden och utveckling inom sociala medier
In this report we examine the NFC (Near Field Communication) technology as far as the development has come until today. We adress different use areas and explain the technical funcionality. By using data collection methods as a specialist interview and also a survery we want to detect potential risks and safety-issues in implementation of the new technology. Our main-focus in this report is to examine how NFC can play an important role in the developement of social interaction and social media. By compiling our data and research materials we will analyze and present a report conslusion.
The Co-Creative Network
The purpose of this thesis is to explore the co-creation process and how value is created based on a service orientation using a network perspective. The thesis is studied from a social-constructionist philosophy, using a qualitative approach of data collection and the theoretical framework includes network theories, theories of service-orientation and co-creation. We have conducted semi-structured interviews with a small firm and its network, which consists of a customer, a supplier and a partner. We found that Håkansson?s ARA framework combined with Ballantyne and Varey?s triangulation of value-creating activities help to acquire an understanding of the actors? bonds, the resources? ties and the activity links that exist in a network.
Redovisning till verkligt värde: Tillämpningen av IAS 40 i svenska fastighetsbolag
The aim of our master thesis is to study the way valuation of real estate is conducted by real estate companies. Furthermore we want to identify the factors that affect the relevance and reliability of the valuation. The reason for this is the introduction of IFRS, in 2005, and the application of the IAS 40 rules stating that real estate are to be recognized at fair value on the balance sheet. To do this we have performed a case study on 10 Swedish real estate compa-nies listed on the Stockholm stock exchange, OMX, Large Cap and Mid Cap list to see how the share value has performed in relation to the reported net asset value since 2005 and how they value their collection of properties. We also studied the assumptions made by real estate company analysts.
Oljeavskiljare för biltvätt : Från idé till prototyp
This thesis describes the developmentof a device called "Oil Separator"which is used for washing vehicles andparticularly car washing. The devicedeveloped for Mr. Car Bilvård AB inUppsala, the company's work involvespassenger transport and courierservices. The company needs anexternal device that meets theenvironmental standards to wash theirown cars in the premises without theneed to modify or reconstruct on thepremises ground as the premises is ona leased contract.Work began with a preliminary study onthe literatures that describes boththe function and structure ofdesigning the device. A few interviewswith other car wash companies had beenimplemented, and some measurements.After collection of the necessaryinformation the specifications ofcustomer requirement was presented .With these requirements a fewconcepts was generated and weighedusing the Pugh matrix for conceptsselection for further development.The final concept was furtherdeveloped and a design has beenpresented.