The main interest of this study was to investigate whether there is hyperglycemia or hypoglycemia in cows suffering from abomasal displacement and to evaluate the effect of transport on blood glucose. Thirty-six cows with left- or right-sided abomasal displacement were included in the study together with 17 cows with other diseases for comparison. Fifteen cows with abomasal displacement and 7 cows with other diseases were sampled before transport. One third of the cows with abomasal displacement had hyperglycemia when the transport effects were corrected for. Separating this group in left- and right-sided abomasal displacement we found significantly higher blood glucose and insulin levels among cows with right-sided abomasal displacement. An explanation for this difference may be a strong stress response secondary to the right-sided dislocation.

This report is the result of a degree project in building engineering, at an advanced level. The project evaluated a building from a technical and historical point of view, and focused on its energy consumption, particularly the energy used for heating. The building in question was a small apartment building in Strömsholm, Sweden. It was made in 1902, from vertical logs, a not so common form of the traditional log house. The goal of the project was to evaluate if the energy consumption could be reduced in accordance with building preservation regulations, that is without damaging any of the building?s cultural or historical values.The building was surveyed with the help of archive and literature studies, interviews and inspections.

In this study, the effects of using fine milled cassava stems as an additive in biofuel pellet production was compared to the effects of refined starch addition. The bulk biomass fuel raw material, to which the additive was added, was a blend of spruce and pine sawdust. An experimental design in the factors cassava/starch content, moisture content and material temperature was used. Measured responses were pellet bulk density, pellet durability, amount of fines, pelletizer motor current, pellet temperature, die temperature and CV for pelletizer motor current (a measure of process stability). Each response was modeled by multiple linear regression (MLR).

Bakgrund: Den intensivvårdskrävande patienten är många gånger i behov av transport utanför intensivvårdsavdelningen för diagnostiserande undersökning eller behandling. Transporten är riskfylld då patienten kräver komplicerad utrustning och avancerad medicinsk behandling. Studier visar att patientsäkerheten ökar om policydokument används vid transportprocessen.Syfte: Studiens syfte var att kartlägga antalet policydokument som reglerar intrahospital transport i Stockholms län och jämföra dem med en guideline.Metod: Urvalet bestod av policydokument från 11 intensivvårdsavdelningar i Stockholms län. Metoden utgjordes av deskriptiv dokumentinnehållsanalys.Resultat: Sex av elva intensivvårdsavdelningar i Stockholms län hade policydokument som reglerar intrahospital transport. Policydokumenten hade fem gemensamma huvudämnen: Riskbedömning, bemanning, förberedelse, övervakning och utrustning vilka överensstämde med dem i guidelinen.

Individual cellulose ?bers were studied to identify the transport and absorbtion phenomena as well as the in?uence of drying. A Chalmers University of Technologydeveloped method within ESEM (Enviromental Scanning Electron Microscope) has been used in this study. The results from the laborations gave the following conclu-sions: The transport of water occurs in ?bers in the ?ber wall surface and the lumen.

The aim of this study is to examine if the leadership style in Faiveley Transport Nordic Ltd has an impact on the psychosocial climate in the workplace. Henceforth, we have checked if the psychosocial climate influences the feeling of satisfaction that exists in the organization and if this in turn influences the degree of extra effort the employee chooses to impose on his or her task. In order to measure the leadership in the organization we have used the Multifactor Leadership Questionnaire (MLQ). The climate, in turn, has been measured through Ekvalls GEFA. All 125 employees in Faiveley Transport Nordic Ltd got the possibility to attend the survey, 58 participated.

There is an uncertainty in the market for grain forcing the meat/milk producers to review alternative feeds to a larger extent, in order to get control over the feed costs. This has led to that the meat/milk producers need to have a good knowledge regarding how the different feeds influences the animals and which technical equipment to use for handling. For those that produce their own feedmix, there is a need to put interest in new crops and their characteristics to be able to get the knowledge of what is required for their own production. It is beneficial to keep an open dialogue with advisors to be updated in new crops and new technology for feeding. When mixing feed at farm level, the legislation is not very clear since it the target group is large scale mixing plants. We have brought up the most important rules and regulations from the EU parliament Council as well as the ones from the Swedish Board of Agriculture (SJV), regarding feed mixing on farm and factory level. We have studied beans and pea at two different moisture levels, in order to evaluate how the moisture level affects the distribution of particles when milling with a plaitmill and a hammermill.

Building with volume element is relatively new and has started to increase more and more. The regulations that exist to regulate and determine how the transports of volume elements are to be conducted are diffuse and not very well adjusted to address the issues with transporting volume elements. Today there are a number of instances that a company has to turn to in order to get a somewhat different view, what regulations say and interpret it in order to know what applies and not applies regarding the transportation of volume elements. regulations. The rules that are in place make it tough for the volume element producing companies to develop and continue to be active on the market.

Storage of biomass is associated with problems like heat development, biomasslosses, and reduction of the fuel quality. Certain processes such as biological- andchemical degradation are responsible for these storage problems. This master?sthesis was carried out at Vattenfall Research and Development AB and is alignedtowards quantifying the biomass losses from short-term storage (1-2 months) ofbark and recovered wood. The biomass was stored in outdoor piles during differentseasons, campaign 1 (summer) and campaign 2 (autumn).

Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

This paper is about how transport companies in the future will be able to adapt their activity to an environmentally sustainable development without the effect of negative company economic consequences. Today, the environmental threat is a global problem and knowledge about that effluent of carbon dioxide have a negative impact on the climate is generally known. A transport system that works well is important for Sweden, but the sector has a negative impact on the environment. Regulation and legislation for increased environmental requirements often meets resistance and fear that the work will be hampered by increased costs for environmental work that can lead to an international decrease in competitiveness. The transport companies have outside pressure from the society to do something about the environmental issue, however the companies? customers are not ready to pay a higher price for environmental work.

This report discusses questions concerning wear on forest roads. The purpose of the work is to investigate if the wear on the roads will decrease when the speed limit gets lower for the trucks that transport the wood. A normal forest road, class B, was used in the study. In total 5000 m3f timber was transported on the road. Data about the road was measured with a profilograph car before and after the timber transport.

The aim of this project was to develop a numerical model simulating the global transport of air pollution. The model currently used by SMHI, the Swedish Meteorological and Hydrological Institute, was intended to perform such simulations at regional scales. However, the usage of a grid based on longitudes and latitudes makes this model work poorly in global simulations. The problem with this grid is that the nodes are concentrated near the North and South Poles. Due to this characteristic, the Courant, Friedrich and Lewy-condition for numerical stability puts a sharp bound on the timestep length.

During the 1990?s a large number of building projects were revealed where lack of moistsafety precautions during the construction process had led to extensive moisture damage. Alsoresent implemented studies have shown that the problems with moisture damages have ratherincreased than decreased during the past few years. Moist is considered to be one of the mainfactors to cause unhealth due to deficiencies in the indoor-environment and does also causeunnecessary expenses and a reduction of the confidence in the construction industry.In this Bachelor of Science thesis three projects have been reviewed to examine how moistsafetyhas been observed during the construction process. Main focus has been to identify thebuilding components that are the most exposed to moist, and to examine how they have beentaken into account during the period of design and construction.

Headwater streams are affected by anthropogenic impacts at multiple scales. One aspect of human impact is sediment transport associated to the abundance of stream structures as large woody debris and the composition of the riparian zone from forest to agricultural landscapes. Riparian buffer zones and stream structures like dead wood are considered as generally important structures for protection against an increasing amount of sediment particles in the water. Hence, in this study these structures were quantified in thirty different stream segments on land and in the water. To measure the transport of sediment Whitlock-Vibert boxes were used in three different types of landscapes; forest, transition and fields. The boxes were left in the stream segments for three months, the taken up and dried and weighed. The results showed that the transition-land in Frösvidalsån had the highest sediment transport. The second highest transport of sediment was in Blackstaån at the fields.