En utmaning under produktionen är uttorkning av byggfukt i byggnadens betongbjälklag. Om uttorkningen försenas kan golvbeläggningar inte appliceras i rätt tid, men att arbetet forceras är inte ett alternativ, då risken finns att fuktskador uppkommer under driftsskedet. Avgörande för att uttorkningen skall fortskrida enligt plan är att torkklimatet i byggnaden är gynnsamt för uttorkningsprocessen. För att kontrollera torkklimatet genomför företaget ett omfattande arbete genom att mäta klimatet, där dataloggar på olika platser i byggnaden registrerar luftens temperatur och relativa fuktighet. Tillsammans med trendmätningar i betong är tanken att insamlad data skall ge en bild av hur uttorkningen fortskrider.

Långtidsbehandling med ventilator utan tillräcklig befuktning kan torka ut en patients luftvägarmed olika komplikationer som följd. Målet för detta examensarbete var att utveckla en ny teknikför att befukta och värma inandningsgasen. Ett fungerande koncept och en prototyp som styrkerkonceptet skulle tas fram.Marknaden för befuktare studerades och de vanligast använda befuktningsmetoderna granskadesför att hitta svagheter som behövde åtgärdas. De två vanligaste befuktartyperna är HeatedHumidifier och Heat and Moisture Exchanger. Den främsta nackdelen med Heated Humidifiervar dess tendens att övermätta luften med kondensutfällning som följd, och med Heat andMoisture Exhanger att inte tillräckliga fukt- och temperaturnivåer nåddes.Därför togs en ny design fram med målet att kunna styra fukt och temperatur oberoende avvarandra.

Resin-top disease is a rust fungi that occurs both as a host alternating form, Cronartium flaccidum G. Winter., and as a non-host alternating form, Peridermium pini Pers. The host alternating form can use a variety of hosts but the most commonly used species in the boreal forest is Melampyrum sylvaticum. In Scandinavia the Resin-top disease infect Scots pine, Pinus sylvestris L. The fungus infects the needles through the stomata and then grows through the branch to the stem where it strangulates the vessels transporting water and nutrition to the treetop, which kills the top.

Hårdgörning av trä syftar till att göra materialet hårdare. Detta går att åstadkomma genom komprimering, det komprimerade materialet tenderar dock att återgå mot sin ursprungsform då materialet utsätts för fukt om ingen låsning sker. Låsningen kan ske mekaniskt i en treskiktskonstruktion som motverkar träets fuktrörelser. Dessa skivor har dock visat sig vara instabila och tidigare försök har uppvisat deformationer i form av kupning. Denna undersökning syftar till att utreda förutsättningarna för att använda komprimerad asp samt att ta fram underlag för framtagning av en kommersiell produkt.Praktiska tester har genomförts för att studera hårdhet, återfjädring och densitet hos det komprimerade virket.

Långtidsbehandling med ventilator utan tillräcklig befuktning kan torka ut en patients luftvägarmed olika komplikationer som följd. Målet för detta examensarbete var att utveckla en ny teknikför att befukta och värma inandningsgasen. Ett fungerande koncept och en prototyp som styrkerkonceptet skulle tas fram.Marknaden för befuktare studerades och de vanligast använda befuktningsmetoderna granskadesför att hitta svagheter som behövde åtgärdas. De två vanligaste befuktartyperna är HeatedHumidifier och Heat and Moisture Exchanger. Den främsta nackdelen med Heated Humidifiervar dess tendens att övermätta luften med kondensutfällning som följd, och med Heat andMoisture Exhanger att inte tillräckliga fukt- och temperaturnivåer nåddes.Därför togs en ny design fram med målet att kunna styra fukt och temperatur oberoende avvarandra.

Bristly swan-neck moss (Campylopus atrovirens) is in Sweden a very rare moss that only grows on a few blocks and cliffs around Gothenburg. The species can globally only be found in areas with high precipitation. Rain fall in Gothenburg has increased with a stronger greenhouse effect. Air pollution in Gothenburg has also improved. Mosses generally benefit from these conditions and this papers hypothesis is that the population of the species has grown because of these more beneficial conditions.

In recent years, moisture damages have been noticed in rendered, undrained stud walls. The design is built on the principle one-stage tightening which means that there is no air gap in the construction. The damages have occurred when water has permeated through the rendering in leaking connections and fittings for windows, doors, canopies, balconies, terraces and awnings. Behind the plaster carrier, which consists of either polystyrene or rigid mineral wool, plasterboard has often been used as a wind protection barrier. In many cases the wind protection barrier and the underlying wooden studs have been exposed to mould and in some cases even rot.

The current situation for Swedish grain farmers facing a situation with decreasing profitability makes it necessary for the farmers to find ways of increasing the margins in their grain growing. Decreasing profitabilities along with Lantmännens closing of grain elevators contribute to the necessity for farmers to invest in grain storing and drying at the farm. By investing in capacity for drying and storage of grain on the farm it is possible to recieve a higher price on the grain sold due to the possibility to sell when the price is higher compared to the harvesting season. An investment in grain drying and storage with a relatively low investment cost that recently has appeared on the Swedish market is the grain stir drying system. This study contains a comparison of an investment in a grain stir drying system where the grain is dried and stored in the same silo and a conventional drying and storage system.

This study is based on the child welfare agency and social welfare board definition in Växjö City about the people who were defined as feebleminded and which solution they choose for this ?social problem?, with focus if they used sterilization as a solution to this ?problem? during the years 1934-1941. The individuals who were regarded as feebleminded were alcoholics, unemployed, people who were feeble in their mind, people who had mental diseases, people who were vagrants and poor people. According to earlier research these people were categorized in a subclass and their behavior were not regarded as ordinary like a human who had a healthy mind, according to that period believes.The boards in Växjö defined the feebleminded people with mentally deficient minds, mental retardation, poverty and in some cases disturbed self-activity. However the most common definition of the feebleminded was mentally deficient minds and mental retardation.

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

Peat litter has been used in animal houses for a long time. Because of its good ability to absorb liquid and nutrients from the manure it can create a dry surface for animals and a valuable manure product. Through changes in agricultural practises the use of peat litter has diminished and is to a great extent replaced by straw, sawdust and cutter shavings although Sweden is rich in peat-findings. The aim of this work was to summarize the presented knowledge about the used of peat litter, techniques, advantages and disadvantages and to compare with other commonly used litter materials. Articles on peat litter have been searched for in magazines, databases and books at SLU library. Visits to peat industries, interviews with peat producers and with peat researchers contributed to the material. Peat is not a uniformly material.

Trenden i byggbranschen är att efterfrågan på täta, energisnåla byggnader ökar. Passivhus och andra lågenergikonstruktioner blir vanligare och vanligare. Riskerna med att bygga in organiskt material som trä i dessa konstruktioner har fått branschen att börja titta på alternativa material. Lättbetong är ett material som både har bärande och isolerande egenskaper. Dessutom är det inte organiskt vilket gör det okänsligt för mikrobiell påväxt.

This thesis within the field of Integrated Product development at the Royal Insitute ofTechnology, performed at Primary Development Dishcare at AB Electrolux, is supposed to finda solution to enhance the hygiene inside an Electrolux dishwasher. The outcomes of this thesisare functional prototypes to evaluate the efficiency of disinfection by the use of Ultra VioletLight and Ozone.The thesis has followed Electrolux Primary Development process, with delivarables andcheckpoints.Ultra violett light with a wavelength of around 264 nm penetrates through the cell wall ofbacteria and micro organisms and causes a molecular rearrangement of the cells DNA. Thisprevent the bacteria from reproducing and it is considered dead. Commonly used UV-C lampstransmits the wavelength 254 nm which is very close to the optimum for germicidal action.A competitive brand have reacently launched a dishwasher claiming to achieve greaterdisinfection with an UV feature. This dishwasher was tested during the thesis and proven tohave a very low effect on the hygienic result.Two prototypes were devolped and tested for UV disinfection of dishware.

Aim: The aim of this study was to explore the care providers' experiences in enabling communionship and solitude in daily living for elderly living in old age homes in a South African context. Method: This study was done using a qualitative analysing method, with empirical data obtained from nursing staff of elderly. The study was phenomenological which aims at deepen the understanding of human experiences as phenomenon. The data was collected by using a groupinterview which included five informants from an old age home in Pretoria. The analysis included two steps; Naive reading and structural analysis in order to transform the individual elucidations into an abstract which had no individual touch.

Aim: The aim of this study was to explore the care providers' experiences in enabling communionship and solitude in daily living for elderly living in old age homes in a South African context. Method: This study was done using a qualitative analysing method, with empirical data obtained from nursing staff of elderly. The study was phenomenological which aims at deepen the understanding of human experiences as phenomenon. The data was collected by using a groupinterview which included five informants from an old age home in Pretoria. The analysis included two steps; Naive reading and structural analysis in order to transform the individual elucidations into an abstract which had no individual touch.