Mankind faces a serious threat. Its activities, for example the burning of fossil fuels, have led to an enhancement of the greenhouse effect - something that has given rise to a global warming. The climate is becoming warmer, a change that has important effects on the nature as well as for humans and their society. Sea level rising, extreme temperatures are becoming more common, glaciers and other ice caps melt and storms becomes more intense when they appear. The main cause is the emission of greenhouse gases into the atmosphere - carbon dioxide in particular.

In 2006, Stora Enso Skog implemented an education program in water management for harvester operators, timber purchasers, cut block planners and supervisors. The focus of the program was creating stream crossings with minimal harm to the stream and the surrounding riparian area. This main purpose of this study was to determine the difference in work procedures before and after participating in the program. The methodology consisted of field studies and interviews with harvester operators and their supervisors. The field study looked at how the streams had been crossed concerning the number of crossings, visible damage to the stream and/or the riparian area made by the machines. Biological parameters such as the width and dept of the stream and amount of large woody debris in the stream were also measured. The field result from 30 harvesting sites showed no significant difference between sites that had been harvested before or after the education program. But the harvester operators and their supervisors experienced an increased concern for watersheds after the educational program.

Corn is an important food and feed crop in the world, in Sweden it?s up till now grown on limited acreages mainly for silage. But I think it can get more important if you can grow it also for grain, because it?s a good animal feed for example, for life stock-, pigsand poultry. On of corns advantage is that it can produce the same amount of dry matter as for example wheat, barley and rise but with 25% less water. I will examine if it possible to grow corn for grain production in the south of Sweden.

The most predominant method for forest harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

The main purpose of this study is to investigate and with it clarifying what is meant by a dismissal for personal reasons must be based on valid reasons. More specifically, what is valid reason and what is required for that demand to be regarded as fulfilled.To my help to achieve this I have asked questions such as what kind of behavior from the employee can be the basis for a valid termination of the employment, what factors do the court put emphasis on in a trial and what is the requirements for the employer during the dismissal.The study has further objectives which are to illustrate the phenomenon of valid reason from a diversity perspective and from an international perspective. To achieve those objectives following questions have been asked: Is some groups covered in a greater extent than others by the requirement that a termination of employment must have valid reasons and are there international counterparts to the Swedish requirement that a dismissal must be factually based.What emerged from the study judicial inquiry is that the phenomena to which the employee is guilty of first is to see as valid reason when the employee are aware of the obligations undertaken in the employment but acting against them and inflicts some sort of damage for the employer.With regard to the employer's obligations in a termination proceeding are they to see as comprehensive and can be summed up to the fact that the employer should do everything in his power to avoid a dismissal.When it comes to the factors a court should take into account is this also a matter of major proportions. The court shall take into account all of the circumstances relating to the dismissal, which means that, with absolutely certainty, determine in advance what the court will decide is an almost impossible task.Furthermore, it emerged from the study that the requirement that a dismissal for personal reasons must be based on valid reasons may come to certain groups of workers to a greater extent than others. The study's investigation also indicates that the Swedish legislation, as it reads today, probably in breach of regulations enacted by the European Union.   .

Climate change is expected to lead to increased rainfall and higher temperatures, among other things. This will have a major impact on our cities. Floods can lead to property damage as well as damages to human and animal health. Higher temperatures will increase the frequency of heat-related health risks and premature deaths. The consequences of climate change will be particularly large in our cities because of the city's morphology with a high amount of paved surfaces and buildings that affect the natural processes in areas such as drainage and absorption of solar radiation.

The third most common conifer in Sweden is Pinus contorta (lodgepole pine). It originates from the western part of North America and was brought here in the end of the 1920s. The lodgepole pine is today allowed for commercial plantations in central and northern Sweden, excluding high altitude locations. Since 1979 only plantations with scientific purpose are allowed in south-central and south Sweden. This document is focused on how lodgepole pine manage perform compared with Pinus sylvestris (Scots pine) in the southernmost part of Sweden, Götaland. The idea came from the fact that the Swedish government is evaluating a notification from the National Forest Agency that suggests lodgepole pine to be allowed for commercial plantation even in southern Sweden.

This essay is about the hamlets´ older boundaries, i.e. boundary lines (?rågångar?) and boundary markers in the form of rocks, and an own survey of two hamlet boundaries in southeast Sweden. Many of the boundary rocks were subjected to unintentional damage or destruction that arose during forestry activities, the excavation of ditches, or road construction. Boundaries between hamlets sparsely populated areas were not clearly defined from the beginning, but were established initially in the form of boundary zones, that often consisted of wetlands, watercourses, or mountain heights.

Kostnaderna för fuktskador i Sverige uppskattas årligen uppgå till mångmiljard belopp.Fuktskador i byggnader medför också en ökad risk för ohälsa hos brukarna. Kunskapen föratt producera fuktsäkra byggnader finns men utnyttjas inte i den omfattning den borde.Den 1 juli 2007 träder en ny upplaga av Boverkets byggregler i kraft. Förtydliganden hargjorts i avsnittet gällande fukt, vilka underlättar verifieringen av entreprenadensfuktsäkerhet. Reglerna innefattar också krav på kritiska fukttillstånd i material. Denna studiesyftar till att kartlägga brister i produktionsskedet och hur produktionen kan utvecklas för attmotsvara de i Boverkets byggregler ställda krav på fuktsäkerhet.Intervjuer har förts med olika representanter i byggbranschen för att ge en helhetssyn avfuktproblematiken.

When designing roads it?s important to knowwhat loads will bedriven on it. The axles on heavy vehicles can either have super single tires ordual tires which, according to studies, damage the roads differently. The SwedishTransport Administration is developing an understanding for the character ofthese different kinds of axle and tire types on the loads induced on Swedishroads. In this thesis a field study was conducted to determine the distributionbetween axles with super single tires and axles with dual tires on heavy vehicles.A highway, a country road and a national road were investigated during thestudy.

European Union has made a new decision that all new built houses by 2020 shallbe near-zero energy houses. Boverket?s definition of near-zero energy housesintends buildings with good energy performance in which a proportion of theamount of energy that must be added to the building is made of renewable energy.Passive House is a set of requirements from FEBY designed to build energyefficient buildings. This is achieved by reducing loss of heat through the buildingenvelope and to take advantage of the passive heat from solar radiation,installation and heat sources like people living in the house.This project has been made with help of Anebyhus and one of their model houseshave been examined from the report?s issues, including Anebyhus?s energyperformance, requirements for the manufacturing and assembly, how theenvelope must be improved to fulfill the requirements for the Passive House andwhat energy calculation programs are available on the market.The report aims to provide solutions for energy efficient houses that are adaptedfor production of house building.Two visits to Anebyhus has been done to study their manufacture and assemblyof building elements.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Plant survival, plant damage and height growth were studied in nine wild cherry (Prunus avium L.) plantations in southern Sweden established between 2000 and 2002. All stands were located to the county of Småland. The survey was conducted during May and June in 2007. During the survey the height, diameter and quality of the cherry trees were recorded. In one stand, red ? berried Elder (Sambucus racemosa L.) was a dominant species.

The large-scale soy cultivation has negative consequences for the habitat of local populations because of the intensive use of pesticides and the destruction of rain forests and eco-systems. GM soya, varieties are often used. The majority of Swedish people, however, do not want GM products in their food. It will be hard in future to ensure GM free food, particularly foods that come from countries where GM crops are grown on a large scale. It is very difficult to avoid cross- contamination when both GM and non-GM crops are grown in the same area.