Sökresultat:
6908 Uppsatser om Model-View-Controler - Sida 32 av 461
Översvämningsmodellering av ett dagvattensystem
Storm water management has become a more important matter as urban areas are expanding and natural areas are being exploited. As nature landscapes are being converted into hard surface areas storm water flow is affected both in terms of velocity and size. A flow increase can easily result in a flooding if the dimensions of the pipeline system are inadequate. Considering predicted upcoming climate changes, flooding?s may become more common in urban areas in the future.
Design av styrsystem till rotationsstol och utveckling av numerisk modell av otolitmembran
This master thesis is made of two parts. The first part concerns the method and results ofdesigning a motion control system for a piece of research-equipment called BIRGIT. Theequipment is made to be used for research on eyemovements. In the second part, a computermodel of a part of the balance organ in the inner-ear is developed. The work has been done atthe Bernadotte laboratory at S:t Erik Eye Hospital.The equipment the control system is made for is a so-called rotationchair.
Metodik för optisk mätning av sprickbildning i dragen betong på mesonivå
This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.
Den nya musikbranschen på AllEars.se : Det demokratiska mötet mellan skivbolag och artister på Internet
AbstractTitle: The New Type of Music Industry at AllEars.se (Den nya musikbranschen på AllEars.se)Number of pages: 49 (53 including enclosures)Author: Viktor BackemarTutor: Else NygrenCourse: Media och Communication Studies CPeriod: Fall 2007University: Division of Media and Communication, Department of Information Science, Uppsala University.Purpose: The purpose of this paper is to compare AllEars´ own view of the website AllEars.se to an observed view of the same site. The comparison is based on theories regarding the Internet in today?s society, convergence, communities and collective intelligence, interactivity and participation, and business in today?s society.Method: Since the paper has a purpose to compare two views of the same website there are two main methods in use. AllEars´ own view has been created via an interview with the company?s CEO, a press release that was released in connection with the launch of the website and texts found on the website.
Kostnadsallokering genom ABC-kalkylering – en empirisk studie av OMX
As IT service departments in organisations are becoming more complex and customised, the indirect costs are increasing in relation to the total costs. The difficulty of fully estimating and identifying the spread of the cost in the IT service department is increasing. As a result, firms tend to budget the business unit as a total cost rather than as a spread of defined costs. In order to deal with this challenge an ABC calculation will be applied. The Time Driven ABC model will be conducted in OMX´s Servicedesk unit within the IT services.
Genrebaserad undervisning : att stötta flerspråkiga elever i deras språkutveckling
The purpose of this study was to examine how the genrebased instruction applied in multicultural classrooms. My observations were carried out in three different classrooms, whit the educators constantly working on language development off the students. Two observations were carried out in Swedish, with a teacher of Swedish as a second language and the Swedish-teacher working with students together. In these two lessons in Swedish, I took away from Pauline Gibbons model, while the third lesson in civics I assumed from Eija Kuyumcu genre model. Both models are based on the Australian research around the genrebased teaching.
Beräkningsmedel för analys av lokal buckling i slanka stålkonstruktioner
This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.
Simulering av vindkraftverk och närliggande elnät vid Risholmen i Göteborg i SimPowerSystems
With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.
Att placera företagsinkubation i en Community of Practice - En studie om lärandemiljön i företagsinkubatorer
The role of small businesses is fundamentally important for the economic development in countries. Within this context, business incubation is used as an entrepreneurship development instrument to promote and support new firms in the early stage of their existence. However, research in the field tends to disregard the perspectives of incubatee entrepreneurs. The performed investigation is based on interviews with entrepreneurs from two different business incubators at Swedish universities. This study uses a Situated Learning Theory (SLT) as a theoretical framework, to examine the entrepreneur's experience of the learning environment in a business incubator.
Arbetsberedningar Utvärdering och åtgärder för ökad spridning av yrkeserfarenheter
This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.
Utveckling av en beräkningsmodell för biogasproduktion
A growing interest for the climate and the environment has led to an increased interest forenvironmentally friendly and renewable energy sources, such as biogas. Planning new biogasplants requires a decision basis including facts about approximate amounts of biogas possibleto produce at the plant. The purpose of this thesis is to develop a model that calculates theapproximate biogas and digestate production from a planned or existing biogas plant.Developing the model required a literature review and studies of calculations concerningbiogas and digestate production performed by WSP Sweden AB. As a complement to themodel development, facts about substrates for biogas production were compiled through aliterature review. In addition the methane potential from selected materials was determined bybatch experiments.
Utvärdering av den upplevda användbarheten hos CySeMoL och EAAT med hjälp av ramverk för ändamålet och ISO/IEC 25010:2011
This report describes a study aimed at uncovering flaws and finding potential improvements from when the modelling tool EAAT is used in conjunction with the modelling language CySeMoL. The study was performed by developing a framework and applying it on CySeMoL and EAAT in real life context networks.The framework was developed in order to increase the number of flaws uncovered as well as gather potential improvements to both EAAT and CySeMoL. The basis of the framework is a modified version of the Quality in use model from ISO/IEC 25010:2011 standard. Upon the characteristics and sub characteristics of this modified model different values for measuring usability where attached. The purpose of these values is to measure usability from the perspectives of both creating and interpreting models.
Folkbiblioteket ? en plats för integration
The purpose of this thesis is to research public librarians view ofthe public library as a meeting place and how it may contribute tofacilitate social integration. To study this we have asked thefollowing research questions: How do public librarians work withthe public library as a meeting place? And how do they contributeconditions for ?soft inclusion??The method we have used for this study is semi-structuredinterviews. Seven public librarians from the Gothenburg areawere interviewed and the empirical material was analyzed usingqualitative content analysis.As a theoretical foundation we have used Dorte Skot-Hansensmodel of the public library as a third place and Mikael Stigendalstheory on social inclusion. Furthermore have we used research onthe public library as a meeting place and social integration as acomplement to the model and the theory.Conclusions from the material gathered is that public librarianssee the public library as a meeting place with potential tocontribute to integrating individuals and groups with one another.The librarians? foremost method was to attract visitors withactivities aimed at certain target groups.
En studie av deltagardemokratiska experiment - trend eller verktyg?
The Swedish public inquiries and most of the political science advocate reforms in the spirit of participatory democracy to strengthen the democracy. Although it is striking how limited and narrow the scientific documentation is in analysing the effects of participatory democratic reforms. Still, many of the local governments in Sweden are reshaping their organisations according to the participatory democracy model. Is it a trend and a symbolic action or a veritable action of good-will of the politicians?The paper argues that the idea of participatory democracy has become popular and widely spread.
SAS arbete för att bli Europas punktligaste flygbolag : -en fallstudie utifrån ett kvalitetsperspektiv
In 2010, SAS received the "On time performance service" award by Flightstats. This award was an affirmation of long-term work, both in projects and as an ongoing process, which the company sought to systematically improve punctuality on its flights. The extent to which SAS followed the values and the underlying theories of the cornerstone model for total quality management was the main issue in this essay. Whether there are conditions for the company to get even further by working in other ways was also investigated. In addition, the importance of punctuality in relation to customer satisfaction was discussed.