The cost for forestry logistics in Sweden is about 25 percent of the total cost of getting the raw material to industry (Anon., 2010). There might be much to gain by taking a look at your supply chains on the logistic side in your company. In this report the logistic chains by Mellanskog for ENA Energi AB in Enköping has been looked in to. ENA Energis plant is a combined power and heating plant and about 99, 5 percent of their fuel consisted of bio energy in year 2009 (ENA Energi, 2011, länk A). The main purpose with this report is to look at three questions: 1. How does the supply chain look today? From forest to industry. 2.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Logistic Culmination ? One or Two Sides of the Coin?An Observation From a Different Point of View Logistic culmination can be compared to a stretched rubber band. If combat units moves in direction away from the supplies the rubber band will gradually stretch. The rubber band will eventually burst and at that point the logistic culmination will be a fact. But if the rubber band was to be let go before bursting, it will instead be contracted.

A persistent problem in the construction industry is its low margins of profit. It is often difficult to earn money due to low efficiency and high costs. Logistics on the construction site answers for a large amount of these costs and it is therefore of interest to find new, more efficient logistic solutions. The purpose of this thesis is to compare two different logistic systems and further to evaluate which one that is the most efficient and profitable. A comparison is made between the traditional logistic systems used for years and a new logistic system developed by an industry association called BEAst.

With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

Predicting corporate failure is an increasingly important topic in the world of economics today. This paper, with the help of the credit ranking company Syna AB, aims to investigate a few different statistic strategies to do just that. This task is accomplished by using a data material of 250 000 Swedish companies divided into two subsamples. The first sample is used to develop the model and the second as a validation sample. The model developing sample holds 160 000 companies divided into five different subgroups based on size and age.

Heat and power stations are often in need of optimizations. A simulation model is a tool for findingways to optimize the plant. The scope of this diploma work is to develop a simulation model ofBoiler 5 at Mälarenergi AB. Boiler 5 is a circulated fluidized bed boiler that was taken into service inyear 2001. Among the included parts in the boiler are cyclone, convection part andINTREX-chambers.

The purpose with this thesis is to investigate how the logistic and the configuration of the terminal buildings and the perceptions of the passengers at Stockholm Arlanda Airport are related to each other, and what effect it has on the passengers and their traveling within the airport.The focus will be on the logistic at all four terminal buildings that is within the Airport. To create a perception of the logistic at the Airport and how it is related to the passengers perceptions, the investigators need to make knowledge of the terminal buildings, and thereby try to link the logistic with the perception of the experience room.Swedavia is the company that own, operate at and manage Stockholm Arlanda Airport. The investigators will make an interview with employees at Swedavia to get a more profound understanding of how the company is thinking about the logistic issues that they need to overlook. There will also be interviews with travelers to get their perception of the logistic, design and atmosphere at the Airport.Observations will also be made at various times at the Airport with focus on all of the terminal buildings. The investigators use qualitative and quantitative methods to reach a result. To achieve a result, the investigators will use theories and scientific facts and other available facts that will be helpful to reach a result that will be analyzed..

Managing credit risk might be the single most important business area for any commercial bank. The assessment of "good" and "bad" corporate clients is a important task for a creditor. A bad debtor is a corporate client with hardships in meeting the continous claims (interest payments) that a creditor requires. One way of evaluating or separating a "bad" client from a "good" client is to assess the propensity for the client to file for bankruptcy. This thesis examines 226 firms in the Swedsh market in the quest of predicting corporate bankruptcy.

Svensk Växtkraft is the owner of the biogas plant in Västerås. The company is planning to increase their treatment capacity at their biogas plant. In connection to this work it is also possible to make some energy saving changes to the biogas plant. The objective of this study was therefore to make an electricity and heat survey of the biogas plant, a detailed study of the heat consumption in the sanitation step and also a comparison of energy consumption with the present sanitation method and an alternative strategy where the waste is treated in 55 °C during 10 hours (the current method is heating to 70 °C during 1 hour). The energy survey was conducted in close collaboration with staff at the biogas plant. The current during normal operation was measured, power was calculated and multiplied by the time of usage to obtain the energy consumed.

In this thesis a possible cost effective runner change of some of the units in the hydroelectric power station Olidan is investigated. The possibility to drive a unit at the same efficiency point through a change of the turbine shaft speed and the rate of discharge is tested. Furthermore the theories behind model testing, determination of efficiency increase from model to prototype and efficiency measurements shall be discussed and analyzed with Olidan as a starting point.A predicted curve has been built on information from model tests and field measurements on the existing runners and runner data from the test of the new model. The predicted curve shows the difference in efficiency between an existing runner and a modern one. It is the difference in efficiency that is used in the calculations that are to show whether changing to a pair of new runners will be cost effective or not.

Isaberg Rapid AB is a company that manufactures for instance staplers and glue guns. Headquarters and main factory is located in Hestra but there are also subsidiary companies in Denmark, Netherlands, France, Spain, China and England. There are also two filial factories in France and China.Today has the company no logistic guidelines committed and that leads to problems since the salesmen promise different things to the customers. This contributes too many different logistic solutions for Isaberg Rapid AB. The company has also noted problems with returns of goods.The purpose with this task is to standardize and compile logistic guidelines, usable to all Isaberg Rapid AB's small to midsize customers.

Managing credit risk might be the single most important business area for any commercial bank. The assessment of "good" and "bad" corporate clients is a important task for a creditor. A bad debtor is a corporate client with hardships in meeting the continous claims (interest payments) that a creditor requires. One way of evaluating or separating a "bad" client from a "good" client is to assess the propensity for the client to file for bankruptcy. This thesis examines 226 firms in the Swedsh market in the quest of predicting corporate bankruptcy.

The aim of this master thesis was to create a dynamic model for the processes in a solid fuel boiler of the moving grate type. Another aim with the model was to keep it as simple as possible but still able to catch the dynamics of the processes in the bedplate of the boiler. The creation of the model had its origin from drying and combustion equations used in earlier modeling work of boilers. The represented model has been used to simulate different kinds of disturbances in a boiler and different ways to control the boiler. These tests show that controlling a number of parameters in the bed of the boiler is an effective way to keep the grate stable during disturbances.