This thesis deals with the compatibility between analysis software Revit Structure2012 and Robot Structural Analysis 2012. The purpose is to become more aware ofinformation management models to be compatible across different softwareapplications. The structural model is made to be optimal for the compatibility of othersoftware Aim is also to gain an understanding of the transferring methods that exist,and which method is most convenient to use and to examine whether the methodswork in practice. Objective of this project is to make the modeling processtime-efficient for constructors. Models do not need to be structured in severaloccasions in different software; it only needs an optimal model that transfers properlybetween software.The method used in the thesis consist cases where the transferring process isexamined.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Numerical simulations play a vital role in both static and dynamic stability assessment of electric power systems and the foreseeing of voltage collapse. Simulations performed by Svenska Kraftnät(SvK) are mainly done in the specialized voltage collapse predicting software tool, SPICA and the more all?purpose software tool, ARISTO.The grid operators at SvK use SPICA to predict the maximum transfer limit at specified sections (in this report the section in concerns is the southern part of Sweden i.e. interface1 4). SPICA is mainly used as an online application by using actual states from the grid, these states update every quarter of an hour.This thesis is a continuation of the master thesis SPICA ? ARISTO JÄMFÖRELSE by Jakob Katzman and Johan Fält.

Smallholder farmers in low-income countries face a number of challenges in animal production. Animal husbandry carries great potential in reducing poverty, hunger and gender inequality, but at the same time infectious diseases are prominent threats to farmers? livelihoods and their animals. The objective of this study was to investigate the socioeconomic impact of infectious animal diseases on smallholder farmers in low-income countries, using African swine fever (ASF) in Uganda as an example. The study was conducted in two parts. The first part of the study was questionnaire-based and performed in Gulu district, northern Uganda.

In 2010, Airwatergreen AB started testing their new technology, the Airwaterwell, an atmospherical water generator of their own design that is running on solar heat, with a production capacity of three litres of water per day and m2. The purpose was to focus on foreign aid organizations as main purchasers for project investments towards rural communities in developing countries that suffer from lack of, or compromised quality of drinking water. In order to further understand if this technology would bring a positive impact in the developing countries, the company contacted the Swedish University of Agriculture for a socio-economic study of the Airwaterwells? potential. The authors elected Cost benefit analysis as the appropriate method for conducting the study and India became the study region because of its many problems with water related issues such as diseases as well as insufficient water supply for households. The regions that this study is based on are Gujarat, Haryana and Uttar Pradesh given their differences in income, health situation and poverty rate.

Organisations tend to focus more and more on product and process development to increase their competitiveness. Several major organisations, among them ABB, have developed models aimed to more effectively control and manage product development processes. ABB is using its standardised model ABB Gate Model for this. The purpose of this thesis is to analyze how the introduction of ABB Gate Model has affected the outcome of decisions and also the decision-making in the product development process. The study is limited to elucidate the version of ABB Gate Model handling product development projects.

The purpose of this paper is to analyze the ongoing changes in German family policy. It explores the issue of whether the German welfare state, in this policy field, can still be regarded as a conservative welfare model or rather approaches a more liberal or social democratic model. A qualitative method is used to analyze the material, especially from the German government, including press releases, other public documents and also articles from the political weekly magazines Der Spiegel and Die Zeit. The changes analyzed are the new parental benefit, the expansion of child care, the concept of whole-day schools and the system of joint taxation. The point of departure is Gösta Esping-Andersen?s categorization of three types of welfare states: the social democratic, the conservative and the liberal.

AbstractIt is important to choose which spare parts to keep in stock. With the right spareparts in stock the costs for inventory and production loss will decrease. Cavalieri et al. (2008) highlights that the balance between inventory cost and production loss is underestimated.  It affects the company and must be considered before decision on purchase.The problem with spare engines is that they are all more or less critical for the production. That can be a reason for why no previous research targeting engines and classification of with engine should be kept in stock has been found.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

This thesis has been carried out in autumn 2009 at Uppsala University for Boliden Mineral AB. Physical modelling has been used to model a comminution circuit. The model has then been linked to a PLC.When a concentrator is about to become operational Boliden Mineral AB have been looking for a way to test the PLC. The purpose of this report has therefore been to develop models for the subprocess in a concentrator and link these models to the PLC. The subprocess was a comminution circuit in Aitik36.

This Bachelor Thesis is entitled "WTO-spelarena för utvecklingsländer? En studie om avgörande faktorer för utvecklingsländers förmåga att implementera sina regimpreferenser". Through our empirical results in conjunction with realist theories, this Bachelor thesis attempts to answer the questions: (1) How does the decline in American power, the nature of existing institutional structure and Third World unity, influence the ability of developing countries to secure its preferred regimes? (2) What function do informal meetings in the WTO have? (3) How does access to informal meetings influence the ability of developing countries to secure its preferred regimes? The paper makes use of case studies from the Ministerial meetings in the Doha development round.The conclusion is that access to these meetings is an important variable to explain the extent to which the Third World can be able to secure its preferred regimes. The degree to which developing countries can secure their preferred regimes is therefore a function of four variables: the nature of existing institutional structures; Third World unity, the attitude and power of the United States and foremost access to informal meetings..

The purpose of this essay has been to compare different constitutions, and their outlook on citizenship, rights, obligations and natural duty. This has been done in the light of the political philosophy, in order to give the answer to four questions. These questions are: Which rights and obligations can be seen in the constitutions, and how can it be interpreted. Can there be signs of any political philosophy in the constitutions?  Are there any differences between the constitutions regarding citizenship, rights, obligations and natural duty? If so, what are the differences? Can the rights be seen in a further extent than the obligations in the constitutions?I have conducted a qualitative comparision study and analyzed the political philosophers and made a classification scheme of their views.

Sweden?s animal legislation was adopted in 1988 and is one of the most rigorous legislations in the world. Despite this, Sweden import beef from countries where animal legislation is not in accordance to the Swedish legislation. The meat consumption in Sweden has, just like the importation of beef, increased while Sweden?s own beef production has decreased.

This essay casts light on the quantitative aspect of the media representation of foreign news. The purpose of the essay is not only to describe the media representation of the countries of the world, but also to explain the representation out of structures that are mirrored by the mass media. Four hypotheses are stated that are operationalized in the research. These are treating four different factors that are believed to affect the representation, economy, geographical distance, cultural distance and the size of the population. A fifth hypothesis is stating that economy is the most influential of the factors.