This thesis work has been performed at the department of diagnosis and dependability at Volvo Car Company, Torslanda. The background of this project is based on interest in ascertaining how different factors possibly can affect a diagnosis method, which has been developed to find leaks in the fuel tank and evaporation system. According to the OBD II requirements leaks with an orifice diameter larger or equal to 0,5 mm, must be detected. The idea of the diagnosis method is to create an over pressure in the system with an air-pump. The current through the pump is measured and correlates to the power consumed by the pump.

The river Göta Älv reaches between Vänern and Gothenburg and is the main raw water source for Gothenburg that supplies about 700 000 people with water. To protect and maintain a high water quality, continuously samples and water analyses are made throughout the river. In 1998 a protection area was founded between surte and Lärjeholm where the raw water intake is. This was made to increase the awareness of the importance to protect the water. However, there is a lot of contribution of untreated stormwater to Göta Älv within the protection area.Göteborg Water and Sewage Works commissioned this thesis where two areas, Tagene industrial area and Kärra residential area, with untreated stormwater outlets within the protection area are studied.

The phenomena of cyber bullying is relatively new, but it is now more prevalent than ever as children today have access to the internet on a daily basis, in school as well as at home. Although cyber bullying is an increasing problem in today?s society, there seem to be few guidelines for teachers to follow when using the internet with their students in school. The purpose of this study is to investigate who, according to six teachers, has the responsibilities revolving cyber bullying ? teachers or parents.

This thesis aims to present the essential background on how to perform climate changeimpact assessments, and to present the results from a climate impact assessment on waterbalance and nitrate leaching for an arable Swedish soil. The soil is a sandy soil in southwesternSweden, grown with spring cereals. This study is meant to be a benchmark example,and cannot be seen as a regional or national assessment for Sweden, rather as an approachto present and analyze the most important parts of these kinds of assessments.A dynamical simulation model (COUP, Jansson and Karlberg, 2004) was used for thisstudy. The model was parameterized and calibrated against data from an experimental site,located in Mellby in Hallands county, south western Sweden. Measurements were carriedout between 1st of April 1988 and 1st of April 1991.

SUMMARY The purpose of this study was to explore how nurses in the emergency department experience and cope with stress in their workplace. The study had a qualitative, descriptive approach and was based on nine individual, semi-structured interviews. They were then processed using content analysis. The content analysis of interviews resulted in two categories, "the nurse's experience of stress," "the nurses coping with stress." Together, the categories highlighted how nurses experienced stress during and after their shifts. The study showed clearly that all nurses experienced and coped with stress in their daily work activities..The authors noticed that stressful time for the nurses were repeated at each session and were similar in character.

This is an explorative study about subject indexing of a special collection of books, administered by the John Andrén Foundation at the library of Ystad. The study summarises a number of theoretical perspectives as well as some practical instructions on how to carry out the task. Theories have been placed into five different groups according to their various approaches to subject indexing. These have been analysed in regard to their usefulness to the Andrén collection. The authors have tested and evaluated six practical models on a selection of books from the Andrén collection.

Since product placement is a relatively new phenomenon in Swedish television, there is a lack of research on what attitudes Swedish TV-viewers hold towards it. This is where our paper will contribute to the research. The purpose of this reserachpaper is to describe and analyze what attitude Swedish TV-viewers has towards product placement. Kim Schröders multidimensional model of mass media reception were used, which is a developed model from Stuart Hall?s ?encoding/decoding? one-dimensional model.

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

   Purpose: The Essay is written on behalf of a company called ?Uppdragsgivaren?. The purpose is to connect theory with the result of the survey and thereby find the critical factors for an optimal placement of the cargo holders in the company?s terminal.   Method: A qualitative case study has been carried out. The theory collection is completed with the result from the survey, which include the information ?Uppdragsgivaren? provides and the result from the survey.

In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

The purpose of this essay is to examine if the judgments of accountants differ, in different cases, between the old and the new law. The method we used to investigate the differences was a combination of experimental and non experimental. Our analysis is based on a survey investigation with ten cases. These cases are produced from a model in which the accountant tests his independence. The survey was sent by mail to about a hundred accountants.

The purpose of this Master thesis is to examine and describe dog breeders? information activities. Questions posed in this study are:? What are the information needs of dog breeders?? How does the dog breeder seek and use information?? How can the relationship between serious leisure and information activities be described?The theoretical framework consists of the sociologist Robert A Stebbins? theory about serious leisure. The study is based on a qualitative methodology.

The main aim of my research essay is to examine two congregations, one in Sweden and one in Democratic Republic of Congo, how theology and the life in the church shape the cultural context. The analysis uses semi-structured interviews of two pastors responsible for organizing the Easter celebration in their churches. The interviews serve the purpose to reveal how they apply theology in their context, how they interpret the Easter celebration liturgically in relation to the early church and how they perceive the cultural development in the congregations Easter celebration 2010-11. To give complementary insights to the interviews I use computer-aided interviews with members of the congregations. The methodological approach is based on a study of contextual theological theories, Easter traditions in the early church, Easter theologies and then applying these theories in the interviews.

Testing has always been an important task in the scope of software quality. Though it has never been as much appreciated within the management of the organisations as the software development has. However testing is becoming more attractive within organisations because it becomes more evident how much money working systems saves in contrast to defect ones. A tester often use testing tools to simplify the work progress. There are a lot of tools nowadays but not many evaluating models which helps the tester to know which one to recommend.

In this study, the pre-tension force in an insert screw connection are examined in order to establish a greater understanding of the system and to facilitate the process of making new metal cutting tools. Certain especially significant design variables such as the offset, the length of the contact thread and the shank length above the threaded hole, are selected to be closely examined. A comparison of the influence on the pre-tension force between threaded holes made with a worn, versus new, threading tool is also involved in the experiment. The study is limited to handling the screw sizes M2,5 and M3,5. The results show that a regression model, with good approximation, can be fitted to the measured values.