Purpose/Aim: The purpose of this study was to investigate future marketing channels from the perspective of professional marketers.Material/Method: The study is based upon interviews with six professional marketers.Main results: Traditional marketing is not being put aside but needs to be combined with new methods. There are several new and exciting ways to gain attention from the audience, all depending on the purpose of the campaign. Mobile technology is considered upcoming and target group defining is a key issue..

The company GEMS PET Systems produces cyclotrons which is a type of particle accelerator. The cyclotrons create log files that are analyzed by the company?s employees for different purposes like troubleshooting or installation. The purpose of the project is to with a usage-centered design method create a paper prototype of a tool that will help the employees to analyze the log files in a more efficient way than earlier.The result shows how the usage-centered design method was used to create the paper prototype and how the user interface was created according to human-computer interaction (HCI)..

In some cases there are no methods to identify raw material which are included in dietary supplements such as tablets. The identification can be done with TLC. A general method description was developed using the raw material gotukola and appel cider vinegar. This includes processing to achieve higher concentration of the active ingredient if needed; evaluation of solubility agents to dissolve the active substance; evaluation of mobile and stationary phase and visualization of the stationary phase. The report also includes an evaluation of stationary plates..

This Degree Project is a cooperativ work with the advertising agency PAX in Falun and the industrial companyRemote Control, who constructs and sells actuators for the global market.The assignment concerns bringing out a graphic profile, or with another expression a Design Management, forRemote Control AB graphic materials. Remote Control AB has a quality certification ISO 9000 and is workingwith, when this report was wrote, an environment certification ISO 14001.The Company has been paid attention to Internet and other media.The supervisors are familiar to that Design Management is a soon coming competition element, like quality andenvironment management.This Degree project contains research, analysis and the construction of graphic material. The research has beencommitted most of the time to trace the customer, the market and the competitor, because its the most importantphase. It?s also important looking at competitor?s way of working with marketing management, so you can separatethem from the own company..

This bachelors thesis was made forWallenius Water AB to develop a basisfor an Airpurifier prototype. Wallenius Water isone of the world's leading environmentaltechnology companies engaged inchemical-free water treatment based onUV-radiation. The thesis aim was toproduce a basis for a prototype that canbe used in three applications:Standalone, RAS systems and ventilationsystems. The work includes anintroductory description of the theorybehind AOP technology based on aliterature review on the subject. Asurvey of products currently on themarket and a product specification hasbeen used as the basis for thepreparation of a number of concepts inthis report.

I did my degree project together with Universeum AB. The project had the work title: children?s world and the aim were to give children between 3-8 years old a place that was especially made for them. With their interests and needs in mind the area should trigger play but also learning through a well planned pedagogical environment.I did this project because I thought this was an excellent opportunity to really practise my new gained skills I had learned during my two years in CCD (Child Culture Design). It also gave me the opportunity to actually see how well my knowledge was working when it was put to the test, and I did learn a lot from this.Together with a crew of 6 people I developed and designed the area.

The thesis aims to be an informative study for landscape architects and hopes to contributeto an understanding of ways water can be used and managed at sites lacking open, greensurfaces.The title "intelligent water design" should evoke the reader?s thoughts concerning intelligentaspects of water. Text, images and the design proposition give hints about these aspects.In the first part of this thesis, various examples of water design are presented. The chosenexamples are all applicable in urban environments with a high percentage of impervioussurfaces.The second part examines Gjutarplan, an urban square in the centre of Kallhäll, in Järfälla,north of Stockholm. Gjutarplan is first framed in a geographical and historical context.

Examensarbetet syftar till att konstruera operatörsgränssnittet till en UGV (eng Unmanned Ground Vehicle) för mobil rekognosering i tätbebyggt område. Operatörsgränssnittet består av både mjuk- och hårdvara. Till operatörsgränssnittet har ett grafiskt användargränssnitt utvecklats där tonvikten legat på användbarhet med funktionalitet för positionering med geografisk presentation och sensorpresentation. Förutom en presentationsenhet för sensorinteraktion och manövrering av farkost ingår en sändtagarenhet för kommunikation mellan operatör och farkost. Två uppsättningar av systemet levererades till försvarsmakten för användning vid metodförsöksstudier..

The data acquisition system COMET developed by Saab AB contains a unit for signal conditioning and A/D conversion, called KSM. The varieties in signal conditioning constitutes of a number of specific PBAs and maintenance as well as reconfiguration of these are complicated not to mention costly. This thesis has aimed to investigating whether the signal conditioning circuits can be replaced by a general purpose, programmable solution. If so, how can this be done? The development has been carried out by evaluating ideas through the use of a laboratory environment and has resulted in an analog design for laboratory purpose.

Denna rapport omfattar ett examensarbete på 22,5 poäng. Examensarbetet har utförts inom ämnet integrerad produktutveckling vid Högskolan i Skövde tillsammans med Jai Designpartner AB. Målet med arbetet var att utveckla ett fällbord som enkelt kan fällas ihop, ha en längre livslängd och lägre vikt än företagets tidigare fällbord. Samarbetet genererade ett fällbord som inte följer de generella principerna av infällning av bordsben. Resultatet blev ett fällbord med minimal klämrisk, med en längre livslängd då infällning av bordsbenet sker med en vridning och med en mindre vikt då ramverk kan elimineras..

Följande projektarbetet har resulterat i en ny webbplats åt verkstadsföretaget Löfman & Co Verkstad AB,resultatet är sprunget ur WordPress och projektet vilar på en teoretiskt grund av läsbarhetsteori samtbeprövad erfarenhet kring ämnet responsiv design. Projektrapporten innehåller både information gällandedet teoretiska ramverket samt de slutgiltiga tekniska lösningarna som implementerades på webbplatsen.Två kvalitativa undersökningar på företagets gamla webbplats har bidraget med ytterligare underlag förskapandet utav företagets nya webbplats.. Utöver det ha en viktig del i utvecklingen gjorts av den ständigakontakten med kunden. Projektresultatet är ett bevis för att det finns en arbetsmarknadsmässig funktionför de studenter som läst Visuell Kommunikation och Design vid Karlstad Universitet..

e-Me projektet är ett innovativt forskningsprojekt där tillvägagångssättet co-design använts för att framställa en elektronisk assistent. e-Me realiserades i januari 2007 som ett pilotprojekt vid Högskolan i Borås. Den elektroniska assistenten är en artefakt som ska förenkla det administrativa och elektroniska livet för studenter. Målet med den här uppsatsen var att öka förståelsen kring co-designs grundidé, praktiska moment samt de kritiska roller som kan urskiljas i co-designprojekt. Studien är av intresse för alla som vill utvidga sin kunskapsbas inom både co-design samt e-Me.

This thesis was carried out at Atlas Copco Tools and Assembly Systems. The purpose hasbeen to develop a design tool to be used for development of new electric motors for AtlasCopcos electric nutrunners. The focus of the thesis has been to increase productivity bydecreasing the power losses in an electric tool. The productivity is defined as themaximum number of tightenings a nutrunner can perform without becoming too hot.Before starting the development of this design tool an existing Matlab script, whichcalculates the losses in a slotless electric motor, has been studied and modified torepresent the real losses in a better way. The modification has been made by performingpractical studies of different losses and then adjusting existing parameters in the Matlabscript.Because design changes in one part of a mechatronic system can lead to a decrease inperformance of another part the choice of parameters that can be changed has been madeso that other parts of the system is affected as little as possible.A study of the existing tools efficiency during an entire tightening has been made toincrease the understanding of when and where the different losses appear and to comparethe modified Matlab script with the measured values.The design tool was formed so that it executes the Matlab script, that calculates thelosses, for a number of different design options and stores the alternative which producesthe least losses.

Balcony Art is an idea for a new kind of furniture group for those who have limited space on their balcony. This report will discuss conceptual and part of primary construction of the chair and table for use on balconies, how the products developed from an idea to primary, preliminary products.In the conceptual design part, the report will discuss how product requirements and specifications are developed and how these controls the design.In the primary construction, the report will discuss the products journey from sketch to functional CAD models and how the products of individual parts are designed and how the durability calculations affect the design..

The computer consultant company Create in Lund AB wishes to facilitate their invoice routines, as it at present is required that the administration finds and compares information from two different systems.The purpose of this thesis is to develop an invoice management system that simplifies the invoice management process for the administration at Create. During the development of the system, I have chosen to follow the software development process Unified Process and also tried to find design patterns that can be applied to the integration.The result of my project is a self-contained application developed using the Java programming language that communicates with the databases of the other two systems and presents relevant information to the user as a set of invoices. Of the 23 design patterns I studied, I used four of them in the invoice management system. However I couldn?t find any connection between any design pattern and the integration of systems.