Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

The outset of this thesis is to raise questions on how we design for the mobile context and the capabilities of smartphones. Not only the presentation but also the use of input and interaction between a service and a user.This work evolves around sign up forms and answers the question: How does the sign up process affect the holistic perspective of a digital service regarding usability and user experience? This thesis consists of a case studies, and design experiments conducted on Twitter, Instagram and Randos sign up processes to explore if and how the usability, and the user experience could be affected and im- proved.This concluded some important aspects to be considered when designing sign up forms for a digital service.The usability, and the user experience is not only affected by user interaction, and the choice of input method but it?s also affected by which data the service is requesting, and more important; if that data is motivated to request by the service..

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER).

This master thesis project will describe and evaluate the interfaces between applications and Controller Area Network, CAN, interface boards from different manufacturers. The interfaces have corresponding functions but the usage of parameters is different. The simply communication of sending and receiving messages is more alike than the supplementary functions between the different interfaces. The CAN communication is more controlled by the CAN protocol and is therefore more alike. The evaluation shows differences and similarities between different interfaces and also difficulties and options to translate them.

Marinediesel has, to meet there customers needs for a suitable sterndrive to powerboats, developed a prototype. The prototype is currently in the testing phase. The opportunity to test the sterndrive under load inside the workshop has not previously been possible. Until now the drive has been tested in a test bench without any load on the propeller axle. The prototype has also been tested under real conditions mounted on a boat.The idea with my thesis was to create a test bench that can run around the clock in order to be able to test things like wear and service intervals and other things that require that the test interval is long.

En sammanfattning av uppsatsen på maximalt 8000 tecken..

During the past years Building Information Modelling (BIM), which is a digital way to work, has begun to spread amongst the parts of the construction process. At the construction phase the larger companies has started using the new way to work. This expansion has not been developed amongst smaller companies leading to the purpose of this report, to investigate in which ways the smaller companies can implement BIM by changing their way to work. The thesis is delimited to work preperations with the objective to define how the work preperations should be structured to enable the implementation of BIM. To achieve the objective of the report, information about the subject has been collected by interviews and literature studies.

This study has been carried out as a part of the EC funded project, SMARTDOC IST-2000-28137, with the objective of developing application components that provide highly interactive visualization and collaboration functionalities. The low-level components from the graphics library AVS OpenViz 2.0 are used as the development basis. The application components can be inserted into electronic documents that allow embedded controls such as web documents or Microsoft Word or PowerPoint documents. Instead of displaying results as static images, a SMARTDOC component provides the ability to visualize data and interact with it inside the document. Although the principal goal of the SMARTDOC project is to create components in a number of different application domains this study concentrates on developing a medical imaging application component in collaboration with the project partners AETmed and professor Alan Jackson at the University of Manchester.

Texo Application has created robots that they call for satellites; with these you can feed in storage pallets into a satellite storage. Satellite storages consist of channels in height (e.g.3 to 8 pieces) and width (e.g.3 to 100 pieces). Channels can be different long (e.g. 5 to 200 pallets). At deposit of a storage pallet the truck insert the satellite in a channel and then the pallet, the pallet is driven into the channel until it reaches another pallet or the other end.

This report is a part of a diploma work, conducted as a part of a Master of Science degree. The diploma work consists of a preliminary study, two case studies, a user study, a paper and this report. It was created at the Linköping University for the department of Science and Technology, in cooperation with Unilever Research in the UK, and partly with the EC founded project, Smartdoc IST-2000-28137. Hand-held, mobile devices like Personal Digital Assistances (PDAs) are becoming increasingly popular in today?s wireless world.

The report examines the factors which may be a contributing cause to the problems that are present when ferritic stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures stainless steel wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the wire. The ferritic stainless steels cause a noise when testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated.

AbstractThe purpose was to investigate whether a recovery perspective, viewed from a psychosocial approach is applied in municipal / private and county related care and rehabilitation. A recovery perspective means that the attending staff ensures that the clients are viewed as holistic individuals, where all aspects of life are considered to ensure adequate care and rehabilitation. A questionnaire was answered by staff in psychiatry, social psychiatry and addiction treatment from different areas of the municipal / private and county related sector.The results show no difference in application of a recovery perspective between these two types of organizations. However, there is a slight tendency (non-significant) to lower-rated general individual competencies for municipal / private. There is also a strong tendency (non-significant) to a general difference between the aspects of the implemented recovery perspective, where the tendency is that the respondents as a whole estimate that the organization to a greater degree creates good conditions for a recovery perspective compared to the degree they are actually working on that basis.

Automationscenter & Bråvalla Elteknik AB is a company that offers the market completed total solutions where the customer can operate and monitor their production from the terminal. In these total solutions they lack standard circuit which are developed by the company and which could manoeuvre/control/monitor controlled process objects. This report defines the work of developing the most common standard circuits.The report is initiated by a short theoretical part about PLC and the PLC system, with a connected terminal, which has been used. Thereafter, the turnout of the demands of specification is reported, after discussing with the supervisor in the course of the project. The report concludes with a disclosure of how the programming, the documentation and the testing have proceeded and a final discussion concerning the project and proposals on continuation.The result is a CD with the documentation of standard circuits and how they are implemented in a new project.

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER).

The aim of this study is to examine reading on the MobileReadforums. The term ?to read? is extended to also cover bookcollection and usage of new technology such as mobile readerunits.A catalyst for reading on mobile reader units seem to be the needto always have access to the personal e-book collection. Apartfrom being a source for reading the collection of e-books alsoserves the purpose of extending the members self-esteem.A large portion of the activities on the MobileRead forum isaimed at making new technology comprehensible with the help ofprotocols to determine the usage of that technology. The processof making protocols also seem to be another way for the membersto extend their self-esteem.Traditional libraries are mainly seen as one of many sources for ebooks.Librarians are mostly perceived as being service mindedbut lacking in e-book knowledge.There is also a risk for miscommunication as the library hasdeveloped other protocols that defines an e-book and how itshould be used.This study is a qualitative analysis based on forum posts collectedfrom the MobileRead forum..