This master thesis is performed at Scania Axles and Gearboxes, a production plant located in Södertälje. Within the plant axles, gearboxes as well as central gears are assembled from components to finished products. All production is conducted on production lines, with a pre-determined rate, which is supplied with components by the material handling department. Since the production quantity and the mix of product variants produced on the production line is customer order-based, the number and type of components needed for production as well as appropriate staffing within the material handling department is difficult to predict. Scania is currently using a number of different resource planning tools for each material handling-department within Axles and Gearboxes to visualize the workload within the departments.

An old and well known problem in sawmilling is to determine which dimensions /products those are most profitable to produce. Existing optimization models maximize the value of the log. In other words, based upon the market prices of the dimensions the models calculate the best way to split the log. Yet there is a great uncertainty if the most well paid dimensions really are the most profitable to produce. The costs of the process from lumber to sawn products are hard to determine and are therefore often left out from the optimization process. In this study the economic contribution of different dimensions/products are analysed.

This project aims to investigate whether algae can be used for biodiesel production in Italy. Algaes are a good option since they are fast growing and do not occupy arable land. The aspects that have been considered are growing, harvesting, which algae strain that is most suitable, extraction of oil, the production of biodiesel and where in Italy this could be possible due to climate. Cost? and energy calculations have been made to investigate if biodiesel produced from algae would be profitable. During the production of biodiesel there are several residues obtained. When the oil has been extracted from the algae, biogas is produced from the residual biomass by anaerobic digestion and then the electricity that can be produced is supplied to the production of biodiesel.

The Swedish parliament has decided that Sweden should increase its usage of renewable fuel sources to a level of 50% of the total energy consumption in Sweden by the year 2020. One way to reach that goal may be to increase the usage of stumps as a bio-fuel. In Sweden stump harvesting is possible on about 5-10% of the total harvested area and thus contribute with 1,3 - 2,6 TWh per year. An increase stump harvest doesn't come without its drawbacks for the environment. When harvesting stumps a tracked excavator is used to pry the stumps from the ground and then cut the stumps into smaller pieces.

The aim of this study was to analyse ninth graders self reported screen based activities, sedentary time and musculoskeletal symptoms and pain intensity. The other aim was to examine changes regarding musculoskeletal pain and inactivity between ninth graders from a cross sectional study in year 2004. To meet this aim, following questions were designed: How is the relationship between screen based activities, inactivity, musculoskeletal symptoms, pain intensity and differences between girls and boys? How have musculoskeletal symptoms and screen time changed since year 2004?Method: The method used for this study was a quantitative method. The research was carried out using a questionnaire that was answered by pupils from 11 schools from all over Sweden.

Studies of modern communication media such as Cell Phones and so called Instant Messengers are popular today. This study focused on these modern techniques, focused on parents as a target group and on what is important for them in everyday communication.By exploratory using three focus groups it became clear that the children, and the link to them was the absolute most important thing for the parents. It became clear that this link to a great extent today exists through the mobile phone.In a following study a Mobile Instant Messenger called My Friends was introduced. It was used by two families during two weeks to see how it would change the communication within the family. The focus was to see how problems with availability were handled, it turned out that:My friends had a more obvious way of indicating availability than the Cell Phone had.

Lao People?s Democratic Republic (PDR) is a country where the majority of the population works within the sector agriculture in one way or another. The number of goats are increasing and the animals can be an important income source for families. However, during the dry season, lack of feed is a great problem for the farmers. Fodder trees have shown great potential as dry season feeding, due to that the trees often hold green and fresh leaves a long time into the season, compared to grass that dry out quickly.

The main goal with the master thesis has been to do a status evaluation of the chain machinery with its start chain and wire to secure the production on a short basis due to that a reconstruction is not planned at this time. An evaluation of the condition of the start chain and the rollers in the chain depository has been done. An offer has been requested for a new start chain and the evaluation of the start chains may be a basis for the decision taking. The production has been able to go on, although it has arisen some problems which have been difficult to find the causes for. There is no gathered ?picture? of the machinery status and a mapping of each machinery has been compiled of comprehensive logs.

Reporting harvested and forwarded volumes are important for the forest industry as it provides information of the size of the stock and facilitates logistics. Figures from Holmen Skog show low reporting frequency. The purpose of this study is to investigate the reason and find suggestions for improvement. A total of 17 machine operators were interviewed using a questionnaire combined with open questions. The results show that the majority of the machine operators find it simple to use the reporting system, although, some of them reports that it doesn?t always work as supposed to.

Due to the technical development the enterprises of today are forced to creative thinking when it comes to marketing of their products. An example of one of these new methods are the development of product placement which has come to an interesting turn namely advertiser funded programming (AFP). Instead of the product just being a small part of the storyline it has become the story itself. The purpose of this study is to analyse how the advertiser funded tv-production Roomservice, a Swedish home styling program, communicates with it?s viewers as well as how they perceive the message.

The release of green house gases and the environmental impacts humans have on the environment are huge and might cause irreversible changes to our earth. Meat is considered to have large impacts on the environment, especially beef meat and therefore there have lately been considerable discussions on the sustainable level of meat consumption and production. The main goal with this thesis is to study sustainable meat production and meat consumption in the county of Dalarna in Sweden. Indicators for sustainable meat production and meat consumption were developed and applied on three cases. Interviews were carried out with a municipality in the region that represents the consumer and three beef farmers that represents the producers.

AbstractPurpose ? The purpose of this study is to investigate possible reasons for long lead-time in a customer driven production, and how the lead-time can be reduced. To fulfil the purpose the study has been broken down into two questions.1. Whichfactorsaffectthelead-timeinacustomer-drivenproduction?2.

In a time when milk producing farm businesses face decline in profitability it is of great importance to examine how the situation can be improved. This thesis is a study off efficiency in milk producing farm businesses represented by Swedish, Dutch and German farms. The aim of this study is to investigate whether any differences exist between companies in these countries. Moreover, the study includes a mapping of a number of factors that determine how efficient milk production can be managed. This mapping is based on a literature review on prior efficiency studies followed by qualitative interviews with milk production advisors as well as a questionnaire sent out to dairy farmers in Sweden.

Syfte: Syftet med studien är att belysa forskning och litteratur kring Lean Production utifrån två vetenskapliga synsätt. Studien syftar även till att undersöka en organisations införande av och arbete med Lean Production, för att kunna ge praktiska bidrag om hur detta arbete kan fortskrida.Metod: Studien har genomförts med en kvalitativ och öppen ansats inom ramen för en fallstudie i samarbete med Sandvik Materials Technology. Empiriskt material har samlats in genom intervjuer och observationer med och av operatörer, produktionsledning och stabspersonal. En omfattande analys av litteratur och forskning kring Lean Production har legat till grund för en teoretisk referensram.Resultat & slutsats: Belysningen av Lean Production visar att systemsynsättet beskriver konceptet som ett säkert recept för framgång, trots sin förenklade syn på organisationers påverkan av omvärldsförändringar. Det socialkonstruktivistiska synsättet visar att Lean Production har en legitimerande funktion i organisationer, men ger liten kunskap om de förändringar som sker i organisationer.

The aim of this report is to analyse the use of the capacity at the CNC (computer numerical control) cutters and show how the level of set up time for these cutters at Stålöv AB. This assignment is concrete whereas there are no subjective questions to this matter and there are only cold figures presented.Production economy is getting more important as the competition hardens and there are several different ways to increase productivity and efficiency in a company. In order to increase productivity and efficiency work studies are used to, through an analysis, find developments in methods that result in improved work methods and to establish the time that are used. Increased production of different parts and customer driven production in combination with increased demands on rationalisation of capital have led to an enlarged interest for shorter set up times in the production.To point out the use of capacity and the set up time of the cutters at Stålöv AB we used frequency studies. Frequency studies are work measure methods based on random observations on predetermined events to calculate the relative occurrence of these events.