Sweden is a member of the European Union since 1995. The European Union issues directives that cover different areas. Member states must implement these directives into their national legislation. The European council issued in 1993 a directive that took action on the organization of working time, also known as the working time directive. The full name is: Council directive 93/104/EC of 23 November 1993 concerning certain aspects of the organization of working time.

In the early 80s, several new synthetic materials have come to be used in the treatment of canvaspaintings, among them Plextol D 360, Plexisol P 550 and Beva 371. Today, many conservatorsfind the information about the long term sustainability of these binding mediums to beincomplete. Evaluation of synthetic materials is mostly done through clinical research, sometimesartificial aging is simulated. The correlation between artificial and natural aging is however notestablished, useful information can therefore be gained through evaluations of actualconservation treatments. The intention of this study is to find out more about how thementioned products perform over time in normal museum conditions.

The use of artificial insemination (A.I.) as an alternative to normal mating in dog breeding in Sweden are controlled by regulations from the Swedish Board of Agriculture and by ethical rules assigned by the Swedish Kennel Club. Only veterinarians, who have a specific certificate and are specially trained and educated, are allowed to perform inseminations in dogs. Each artificial insemination must be documented and reported to the Swedish Kennel Club (SKK) which, on the behalf of the Swedish Board of Agriculture, yearly presents statistics concerning the use of A.I. in Sweden. The objective of this study was to illustrate the use of artificial insemination in dog breeding in Sweden for the last decade, using the yearly reports from the Kennel Club during the period of 1995 to 2004.

Dimensional stability is an important aspect of fuel mechanical design and licensing of new fuel designs for nuclear power plants. Dimensional changes within the reactor can affect the safety margins against overheating of the cladding and the pellets, therefore it is crucial that the dimensional changes are kept to a minimum.The profits per produced kiloWatt hour continue to decrease for the Swedish nuclear power plants. Some reactors are even operated with a calculated loss. To reduce fuel costs and thereby improve the profit some reactors are operated with higher uranium enrichment, so that the assemblies can reach a higher average burnup. This increases the neutron fluence to the pellets, cladding an spacers.

Intergovernmental Panel on Climate Change (IPCC) recognizes glaciers as the best land-indicator of climate change. A variety of studies have concluded, using both modeling and field studies, that above all climate parameters precipitation, particularly winter precipitation, and summer temperature controls the change in glacier mass balance. With global warming almost all glaciers on Earth are losing mass. In this study, the summit-glacier constituting Kebnekaise's south summit (called the Southern-summit henceforth), Sweden's highest point, is studied to see how it is affected by winter precipitation and summer temperature during the period 1968?2013.

The aim of this study is to have a deeper understanding about the motivations and the obstacles of an immigrant?s language learning. I have studied the problem with focus on integration and language learning. The study is principally based on deep interviews with Turkish immigrants. I have studied the question by means of a socio-cultural perspective of learning; Mead?s conceptions I, Me and the generalised other; Scheff?s conception, the social bonds and Freire?s conception, dialog and Asplund?s conception social responsiveness.

The economical and judicial cooperation that EU constitutes results in that there is an increasing amount of international disputes arising. These international disputes in turn result in questions concerning private international law. The principle of mutual trust is not only an important principle in the entire judicial cooperation but especially important in the area of private international law. The principle means that the member states have to trust each other and the different legal systems. The aim of the principle is to ensure a well functioning internal market that is permeated by free circulation and freedom of establishment.

The rise in prevalence and severity of obesity and related diseases imposes increasing costs on society. The objective of this thesis is to discuss and estimate the possible effects of a so-called fat tax as a tool for minimizing these costs. Two alternatives for differentiation of the value-added tax (VAT) on food are compared. The first alternative is an increase of the VAT levied on food containing saturated fatty acids. The second alternative is a subsidy on fruit and vegetables in the form of a VAT at zero percent, instead of today?s twelve percent.

Haemophilia is an inherited disease which causes increased bleeding due to defect clotting factors VIII and/or IX. There are two forms of haemophilia, A and B, which both are X-linked and due to mutations of the genes of factor VIII and factor IX respectively. This study focuses on Haemophilia A and thereby factor VIII.The drugs that are available on the Swedish market today for patients with haemophilia A include Factor VIII(FVIII), which has been purified from human plasma and recombinant factor VIII(rFVIII). The main goal of this study is to gain a better understanding of the effects of treatment of haemophilia A with either purified plasma factor VIII or recombinant factor VIII on reducing or preventing bleeding and on side effects.  The study was designed as a literature review and searches were carried out in PubMed at the Linnaeus University library.  The criteria for selection of articles were: patients with haemophilia, treatment with plasma derived and/or recombinant factor VIII as well as clinical studies.

Mechanical relays are more and more being replaced with semiconductortechnology. In this thesis it is investigated if and how the larger loads couldbe controlled by transistors. The main part of this work aims to create andverify a solution that can control the starter motor, as well as protect it incase of any failure. The different malfunctions that the solution protectsagainst is high current, too high peak current, low current, maximum cranktime and minimum cool off time. The timers also protect indirectly againstoverheating of the starter engine.The transistors used are BTS555, from Infineon.

There is a great need to reduce nutrient leaching from arable land into lakes and oceans. By using several different types of models it has previously been possible to describe nutrient losses in a catchment area with a minimum unit of sub-catchment level. At present, it is instead desirable to model a smaller catchment with an opportunity to re-connect the results to the corresponding fields in the catchment. Such models already exist but they are not fully able to properly describe Swedish conditions and land characteristics in our region.With the approach of creating such a model, SLU has developed a project with this work as its first stage. The model is expected to be created under the working name SWE-model which stands for Soil Water Environment and is in this first stage supposed to apply the SOIL model in catchment scale. During the procedure to describe the first step in the process of developing such a model adapted to Swedish conditions and which works in the catchment scale with an area of about 10-30 km2, focus has been set on calculating the transport of water flow from different hydrological response units. Regardless of the processes occurring in the soil after the water has been added, it is assumed that all the water which flows from each simulated unit is drained.In the first step the hydrologic response units were identified based on land use and soil type in the study area. With the help of a script with functions that retrieve and transform data, certain units were chosen for simulation. The script was also created in this project. Finally, the model results were aggregated and summarized for each unique unit, for each sub-catchment, and also for the whole catchment.From the results it is possible to see similarities in the flow dynamics between modeled and measured data. The efficiency coefficient has been calculated to correspond to the mean of the measured values for the whole simulation period. With an automated calibration process the model should be able to perform better. The volume error gives an indication of overestimation from the model..

Ternary codes for unequal error protection is a part of a communication system where different parts of the information to be transmitted can receive different amount of error protection. There are a lot of applications where the channel conditions fluctuate so that reliable or acceptable communication can not be guaranteed. Regardless whether the fluctuations of the channel are intentional or not the idea is to let the coderate decrease so that the error correcting capability can increase for the part of the information to be more protected. By using the support, the nonzero positions of the ternary code, a new binary code can be extracted with properties different from the ternary code in the sense of cardinality and minimum Hamming distance. When the channel conditions are good the receiver decodes the message using ternary decisions and receives all information included in the codeword.

In this diploma work the approach of determining the required amount of reinforcement in slabs exposed to pure tension is processed, on behalf of Ramböll Uppsala. It is a well-known problem in the industry that there are uncertainties in the determining of the amount of crack reinforcement, especially for structures exposed to pure tension. Cracking caused during the time of dehydration in concrete slabs is the most common defect according to statistics made by CBI[1], which provides numbers as high as 35 % of all the defects caused on slabs are generated by cracks. Comparisons between Sweden's former national standard BBK 04, Building Regulations for concrete structures due to restrained forces of shrinkage, and the current European standard Eurocode 2 are carried out through theoretical studies and concludes with several examples of calculations. Rigorous calculations of both standards, BBK 04 and Eurocode 2 with application of the national annex in Sweden and Denmark are performed.

The purpose of this study is to analyze and evaluate the suitability of the three instruments SERVQUAL, SERVPERF and Zone of tolerance to measure service quality, from the respondents' perspective. This study has been carried out by a quantitative method in which respondents answered three questionnaires, which was based on the three instruments. The SERVQUAL instrument is a revised version based on criticism by Carman (1990). It is based on the five dimensions; reliability, responsiveness, assurance, empathy and tangibility, with 22 items in which each dimension is associated with a number of items. SERVPERF is the instrument most similar to SERVQUAL and is also composed of the same five dimensions.

As demand for renewable energy is increasing rapidly, the market for biomass pellets is expected to continue to grow in the near future. Most of the new raw materials that are discussed for pellet production have one thing in common; the production costs will increase compared to using traditional raw materials such as sawdust and planer shavings. The aim of this thesis is to investigate to what degree increased use of new raw materials for pellet production will affect the general pellet prices in Sweden and to survey what plans Swedish pellet producers have concerning new raw materials. To investigate the raw material situation of the Swedish pellet producers an industry survey was performed. Literature studies were also made on previous research in the subject field. Calculations of the production costs for pellets were done for the raw materials sawdust, wet sawmill chips and energy wood respectively. New raw materials are already used by the large-scale pellet producers in Sweden.