Livscykelanalys används som metod för att undersöka produkter eller tjänster från ?vaggan tillgraven?. Med hjälp av mjukvaruprogrammet SimaPro utförs en livscykelanalys på förbränning av avfall med energiutvinning. Resultatet jämförs med en livscykelanalys som utförs på biogasproduktion från matavfall, för att visa vilken av processerna som har mer positiv påverkan på miljön. Resultatet visar att förbränning av avfall bidrar till minskad miljöpåverkan med 63,9 kg CO2-ekvivalenter per ton avfall.

The population growth and urbanisation in low-income countries bring issues of poor living standards and miserable sanitation conditions onto the agenda. If well-functioning waste management systems were developed, this could master some of the problems. The already existing local informal waste handling system that is common in many low-income countries, needs to be developed with proper sorting and composting solutions to decrease the environmental burden and improve the overall situation in the dense cities. This master?s thesis project is performed with the intention of developing functional decentralised waste management units in the city of Pune, India.

Pulp- and papermills expend vast amounts of water in order to produce pulp, paper and cardboard. Hence, they alsocreate vast amounts of waste water which has to be cleaned before it can be released into the receiving body of water. Insuch a wastewater treatment plant, tremendous amounts of energy are expended by the aeration in the biologicalcleaning process. This aeration is necessary to supply the microorganisms that shall decompose organic material withoxygen, which they need for their metabolism. The transfer of oxygen from the gas phase to the liquid phase isprimarily inhibited by surface-active substances in the waste water like resin acids or fatty acids.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

The report comprises two separate parts:part 1:  Temperature needs for district heating in the paint shop for axles in building 210part 2:  Energy and low temperature waste heat solutions in heating and cooling systems for   building 64 with surroundingsThe paint shop for axles in part 1 has air quality requirements in places for coating of axles. Toachieve desired air properties there are different process ventilation systems, which consist ofventilation coils for heating and cooling, plus air humidifier. The ventilations coils for heating usedistrict heating. Today the ventilation coils use water of 100°C to achieve necessary air demands inthe coating boxes. This part of the report investigates whether the existing system would achievethe air requirements with a water temperature of 75°C instead of 100°C in the ventilation coilsduring the coldest parts of the year.

An excessive input of nutrients to lakes and other water bodies has created a problem with eutrophication in Sweden. Untreated, or partially treated, domestic sewage is a major source for discharge of phosphorus (P), which is the nutrient most frequently responsible for eutrophication of most fresh waters and the Baltic Sea. The waste water can be cleaned by filter materials, which have a high P-retention ability and which after saturation may be used as fertilizers. Four potentially suitable filter materials were tested in batch- and column experiments in this study. In the batch experiments, the following materials were shaken with waste water in time series ranging from 5 seconds to 60 minutes: coarse (1-4 mm) and fine (0-2 mm) Polonite® (heated bedrock from Poland); Filtralite® (light expanded clay aggregates with limestone added before burning); water cooled blast furnace slag (BF-slag) and BF-slag mixed with 10% burned limestone.

Detta arbete har sin utgångspunkt i ökad återvinning och minskning av sopberg. Ett exempel som vi har använt oss av i vår forskning är ett samarbete mellan Röda Korset och Kriminalvården. Varje år slängs 25 % av de textilier som välgörenhetsorganisationer får in och dessa sopberg skulle man kunna minska genom ökad återvinning. Kriminalvården har registrerat ett varumärke som heter Made in Jail, vilka tillverkar köksrelaterade produkter. Syftet med det här arbetet blev därför att utveckla idéer till hantverksprodukter som slukar mycket spill.Valet av metod blev kvalitativa intervjuer, som utfördes med tre personer med olika kopplingar till arbetet.

The demand for district heating is expected to decrease in the future, due to competition from heat pumps and energy efficiency measures in buildings. Development of existing district heating systems is therefore necessary for district heating companies to maintain market shares. This Master?s thesis describes and investigates the heat and electricity production and profitability of a combined Organic Rankine Cycle (ORC) and heat pump that is integrated with an existing district heating system. The studied district heating system is utilizing heat from waste incineration. In Sweden waste constitute 20 % of the fuel mix used in district heating systems, and this share is expected to increase in the future.

The demand for biogas as vehicle fuel has risen sharply and there is a great need for increased production. A possible addition of vehicle gas can be produced by upgrading landfill gas which is formed by degradation of organic waste. This thesis investigates the potential of producing vehicle fuel from landfill gas in the region of Biogas Öst.In 2008, an amount of 32 million Nm3 landfill gas was extracted in the region. This level can be maintained for another ten years if the efficiency of gas extraction is improved. The annual production will decrease with time since landfills aren?t allowed to receive more organic waste.

Titel: Value stream mapping in practice ? A case study at Light MyFireAuthors: David Rydman and Tomas ÖnnemarMentor: Veronica Ülgen SvenssonExaminer: Åsa GustafssonBackground: Companies push their prices in today's markets to be competitive, which means that companies need to find ways to reduce costs while maintaining profits. (Cudney, 2009) According to Bergman and Klefsjö 2007, the basic rule of quality improvement says "there is always a way to achieve higher quality at a lower cost". One way is to improve a company's processes to get a more efficient flow and improvements that may cut costs. (Bergman & Klefsjö, 2007) Why it's important to look at the processes are that they often contain waste that can be eliminated.

I have always lived around mines and around people work­ing with mines. They are a natural part of my life and, inev­itably, a great interest of mine. When time came to make a decision for a degree project, focusing on the mine context felt as natural as breathing.In LKABs underground mines, safety in fire accidents is a great priority. Of outmost importance for the escape is to have a personal gas filter for filtration of smoke and/or gas. My design project resulted in a concept which is aimed at shortening the user journey from the start of the accident until the user has applied the personal safety solution and is ready to escape.Throughout the project I?ve been working with a context which is heavily regulated, and all problems are serious, important ones.

Food is widely consumed and in 2011 an average American devoured approximately one ton of food. The production of these goods requires large amounts of energy and contributes to 22-31 % of all greenhouse gas emissions occurring in Europe. More than one third of the produced food is discarded instead of consumed, and food waste make up about 30 % of the waste generated by households. 60 % of this food waste could be avoided if the eatables were handled in a better way.Avoidable food waste arises partly because residues from food are not taken care of, and because the food is not stored in a way that optimise its durability. Residues arises part- ly because of the contradictory and complex demands of everyday life and are, because of our busy lifestyle, difficult to avoid.

The environmental work in Sweden has developed a lot over the past fifty years. Today, most companies have some kind of environmental work. Environmental activities are regulated by the Environmental Code, which applies in parallel with other laws. This report is an environmental review for Bräcke Diakoni. The report aims to find out how much environmental impact Bräcke Diakoni has.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

Important issues for the local authorities are what to do with the sludge produced insewagetreatment plants. The tax for landfill leads to higher costs with 250 SEK/ton. On the 31December 2004 it will be forbidden to landfill sludge.In Sweden the yearly production of sludge is 240 000 tons, counted as DS. The phosphorouscontent is 3 % in sludge. The total yearly production of sludge gives 6000 tons of phosphorous.