Chronic obstructive pulmonary disease (COPD) is a chronic lung disease. The disease is the fourth leading cause of death and more than 5 percent of the adult population worldwide is affected.The aim of this study was to investigate the association between periodontitis and COPD.Search for material for the literature review was done in the medical database PubMed where the keywords were: "Chronic obstructive pulmonary disease" and "Periodontal health or periodontal disease". The result is based on twelve studies that were extracted and analyzed. The studies have investigated pocket depth, attachment loss, plaque index, bleeding on probing and bone loss. Ten studies compared a COPD group with a healthy control group, one study compared two COPD groups and one study examined a COPD group and a group with other lung diseases.Most studies found that people with COPD had a higher incidence of pocket depth, attachment loss, plaque index, bleeding on probing and bone loss.

The purpose of this study is to study the Swedish Tax information campaigns in 2010-2012. Questions about what worked better than others, and what impact this has had has been set up. The study shows that work has essentially divorced by 2011,worked with a significant amount of local material. This work had an impact on mass media published locally in newspapers. This work fits well with research in the area showing that messages should be tailored to the target audience and capture the target group's interest.

Sahlgrenska Academy at University of GothenburgDepartment of Internal Medicine and Clinical NutritionTitle: ?What nutrition therapy has the best outcome on growth in preterm children and/or children born with low birth weight??Author: Josefine Nyström and Rebecca HammarSupervisor: Fredrik BertzExaminer: Frode SlindeProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: April 11, 2013Background: There is a number of reasons why a child is born preterm and with a low birth weight, for instance if the mother is underweight, smoking or exposed for malaria. The negative consequences of being born preterm or with a low birth weigth are many, both on long and short term. According to the WHO preterm birth is the most common direct cause of infant mortality. By providing the right measures in time when it comes to nutrition the mortality can be reduced considerably.Objective: To examine and summarise the scientific ground when it comes to the best nutrition therapy for preterm children and children born with a low birth weight.Search strategy: A systematic literature search was done in the databases Pubmed, Cohrane and Scopus.

Background: Media has for a long time been reporting about the audit industry, often focusing on so-called auditing scandals. Economic journalism has grown stronger, the corporations are given more and more power in society and the public interest is increasing. We intend to examine how mass media affects the expectations gap and how the auditing firms operate strengthening the society?s confidence in the industry after mass medial exploitation. We also want to investigate whether the relatively new phenomenon social media is affecting the auditing firms and industry?s external communication, as well as what consequences negative publicity may have for the individual auditor.Aim: The aim of the study is to create an understanding of the audit industry?s relation to the media as well as to describe and analyze how mass media?s coverage is affecting the audit industry, auditing firms as well as the individual auditor.

To produce milk of good standard the feed for the animals kept for milk production is an important part in the work of quality. This makes it important to feed them with good forage, especially when feeding with silage. The process of making silage is very complex and requires a careful handling to be successful. The fundamental idea is to create an anaerobic environment in the herbage to favour the desirable micro-organisms, in this case the lactic acid bacteria. This environment is created by careful handlings were the importance is to pack the crop well and cover it as soon as possible to exclude oxygen.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2015:05.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

The study was carried out at the Kungsängen Research Centre, Department of Animal Nutrition and Management, Swedish University of Agriculture Sciences, Uppsala. The technical development in dairy production has resulted in a housing system where feeding and milking is done automatically without human contact, a so called automatic milking system. The motives for utilising an automatic milking system, is to increase the animal welfare and to decrease the need for manual labour. However, the system does involve a change for the animals, among the effects is the deprival or the diminishment of a chance for synchronous behaviour and the animals have to agree among themselves in which order they use the feeding stations and the milking unit itself. How and if this affects the animals well-being and production is yet to be solved. A possible way to form an opinion on this, is to study the animals ranking order along with hormone profiles and production. The purpose of this work was to study the effect of low- vs.

When cows in Sweden are inseminated the heat strength is reported to the Swedish milk-recording scheme and AI scheme. Cows that show strong signs of estrus are desirable and the trait is included in the Swedish breeding goal. A strong heat makes it easier to inseminate at the right time and to avoid long and expensive days open. Since ten years the heat strength is scored from one to five by the farmer and reported to the milk-recording scheme and AI scheme. Earlier the score was from one to three and the decision was made by the AI technician.

This master thesis was a continuation of a previous study in the diesel exhaust characterization, which is part of the academical work embedded in the EMIR-1 project. The main objective of this thesis work was to finish the installation and make the proper modifications of the particulate mass measuring system located in one of the engine test cells at KTH, in order to be able to measure the mass of the particles from the exhaust of diesel engines.This experiment requires a diluted flow sample from the exhaust that should be sent to the device that makes possible the measurement of particle mass, called TEOM. In the first stage of this project, the objective was to study and make the proper modifications in the existing KTH diluter because there were several problems to obtain a constant dilution ratio from it during tests.This modifications were made and it resulted in a great improvement in the maximum inlet and outlet flow that this diluter can handle. Therefore another modification is proposed for controlling the inlet exhaust flow so it will be possible to regulate the dilution ratio and make it constant along a wide range of engine loads and speeds.The second and most important stage was to make particulate mass measurements possible by analyzing the frequency signal from the TEOM device. The idea was to obtain the frequency of oscillation from the tapered element in the TEOM, and therefore with the proper correlations, be able to predict the particulate mass concentration in the exhaust flow from the engine.An electrical problem in the TEOM circuit was detected and corrected, so the signal that carries the frequency from the TEOM can be analyzed properly.

As trucks are getting more and more advanced, information about their weight has become a key factor for controlling them in a more fuel efficient and safe manner. Knowing the mass of a heavy duty vehicle in real time has been a difficult challenge for the truck manufacturers. With the processing power for electronic control units in trucks steadily increasing, more advanced algorithms for calculating the mass has been developed, but at the moment there still is a wish for better performance.Since there is a lack of good information regarding the external forces acting on the vehicle, forces that depends on the slope of the road, foundation of the road and the wind, the methods have to be able to disregard these. Such an approach, based on an indirect least square solution, has been evaluated in this thesis. The results have been promising and based on these a recommendation about further evaluation has been made..

At Forsmarks Kraftgrupp AB (FKA) forces on pipe systems due to transient flow are frequently calculated as a step to verify their structural integrity. In nuclear industries these forces are often calculated with a one dimensional thermal-hydraulic analysis-code called RELAP5. When calculations regarding more complex geometries are needed, the three dimensional code Fluent is often used. This code is highly time consuming and requires large computational power.This projects aim is to compare calculations of pressure, flow and forces carried out by RELAP5 and Fluent for an arbitrary pipe section during transient flow conditions. This has been accomplished by constructing a simple geometry for which a transient flow is simulated in both programs.

During the time of membership in The European Union Swedish domestic policy has gone through many changes. A lot more political areas are being influenced by the EU policy. Today every ministry has got some sort of EU office. Swedish politicians are functioning on two arenas, domestic and European. At the same time Swedish membership has gone from being highly discussed to being a state of normality.

This essay includes an osteological analysis on the 1122 scattered human remains from The Pitted Ware culture site at Ajvide, Gotland. The scattered human remains have been found in the cultural layers, during archeological excavations at Ajvide between the years 1983-1987 and 1992-2009, where a burial ground was discovered. During the excavations, 85 skeletons graves were found, with complete and incomplete skeletons of 87 individuals. But aside from the graves, scattered human bones were discovered at The Pitted Ware culture site. One of the aims of the essay was to examine the bone material of the scattered human remains, and to determine whether this could possibly be a different type of burial custom than the skeletons graves.