Sök:

Sökresultat:

1120 Uppsatser om Mid-phase Measurement - Sida 11 av 75

Svensk vindkraft

Sweden's drinking water quality is considered to be high partly due to a high quality of the raw water and a well developed sewage infrastructure. Despite this, there is water contamination that could be prevented by installation of a sophisticated early warning system. Some of the major players in the production of drinking water have already invested in different types of early warning systems to ensure drinking water of high quality. There are various forms of early warning systems where automatic monitoring of E. Coli is an interesting alternative.

Lane Keeping Aid : ett förarstödjande system för bilar

Many traffic incidents are due to the driver?s lack of attention, resulting in dangerous lane departures, either sliding off theroad or into the oppose lane. These kinds of incidents often have serious outcomes, which has led to much effort being concentrated on preventing or lessening the damages when the incident is already a fact, for example by installing safety belts and air bags. These measures may be considered to be acts of so-called passive safety. Active safety on the other hand, means that the safety systems intervene before the incidents have occurred.

Clashes and Education in Timor Leste

The purpose of this qualitative thesis is to describe and analyse the implementation of an education system in the newly independent state, Timor Leste. One question to be discussed is whether an emergency phase is still going on in the development of a functioning school system, or if Timor Leste already reached a capacity building phase? Via the participant's answers in field observations and interviews, the study analyses the clashes between generations, social classes and different levels in relation to the choice of Portuguese as an official language and the international environment in the country. The thesis concludes that a lot of work remains in creating a fully functioning education system. We enjoyed the writing - and hope you will enjoy the reading!.

Regressionsmodellering av dynamiska råemissioner från statiska mätningar

By using steady-state measurements for predicting emissions under a dynamic drive cycle wouldsave a lot of time and money for the exhaust aftertreatment specialists at Volvo cars. The idea forthis thesis has been to investigate if statistical regression models can be used with good accuracy.Questions included are for example if common operating variables such as engine speed, air-fuelratio etc. is sufficient to predict engine-out emissions over the engine operating range with goodaccuracy. Focus was set on the modelling of warm engine, but also the more complex engineheat-up phase was investigated since it is a great contributor to total emissions. While NOxcouldnot be measured because of malfunctioning measurement equipment, only HC, CO andtemperature at inlet of first catalytic converter has been modelled.

Modellering av ett bränslesystem i Modelica : tillämpat på ett obemannat flygplan

Mathematical models possible to simulate are of great importance in order to make successful projects in the aircraft manufacturing industry. An aircraft fuel system is very complex, containing pipes, tanks, orifices, valves and pumps. The principal of this thesis is using the tool Easy5, which no longer is considered reliable enough in terms of development and support. This thesis tries to evaluate the Modelica language as a possible alternative to Easy5. To make this evaluation, the components concerned in the fuel library in Easy5 are implemented to the Modelica language.

Identifiering av parametrar för tillståndsbedömning av en vattenkraftstation

The report begins with a general inventory of possible technical faults in a hydropower plant and of possible fault indicating measurements. Then an investigation is made concerning a few different faults. Based on this investigation a choice on seal box condition and water leakage is made as problem for a more thorough examination, in which it is concluded that the turbine water leakage is larger when the turbine is put into operation. The examination ultimately results in a computer alarm for faults related to the seal box. Finally a few things are mentioned about flow measurement and pressure measurement in relation to the project as a whole..

RCC-Jordfelsskydd, mätmodul för övertonsanalys

The majority of all power cuts that affects individuals and communities are caused by earth faults on the power transmission lines at 10kV and 20kV level [1]. If these power cuts could be eliminated, less disturbances and interrupts would lead to large amounts of money savings.Swedish Neutral has developed such a protection system. When an earth fault occurs power is injected into the neutral point of the transformer. The RCC (Residual Current Compensation) protection calculates a compensation current exactly 180 degrees out of phase to the fault current. Doing this, the voltage at the fault location becomes very close to zero, without affecting the power transmission.The protection system can only compensate automatically for the fundamental frequency (50Hz), and manually for the 3rd, 5th, 7th and 9th harmonics.

En studie av skillnader mellan monotisk och dikotisk 40 Hz Auditory Steady-State Response

ObjectiveThe objective of this study was to investigate differences between monotich and dichotic 40 Hz Auditory Steady-State Response (ASSR) with Interacoustics Eclipse.DesignThe aspects studied are test duration, relation be¬tween ASSR and behavioural thresholds (BT), reproducibility and correlation between rejects during Brainstem Response Audiometry (BRA) and differences between ASSR and BT. Monotic and dichotic ASSR-thresholds for eight normal hearing subjects (.

A Comparison of Two Immunoturbidimetric Assay Methods for Serum Amyloid A in Cats.

The analysis of acute phase protein serum amyloid A (SAA) has recently been brought into clinical use in veterinary medicine. Some of the difficulties with incorporating the SAA method in clinical practice have been the expensive and rather large equipment required for the method. Due to these difficulties only larger clinics can afford to use the SAA analysis.The company Equinostic has recently developed a smaller instrument that costs one-tenth of a larger instrument. The instrument is named EVA1 and has so far only been used to analyze SAA in horses.The aim of this study was to investigate if the EVA1 instrument could be used to analyze SAA in cats. This study included 24 serum samples from cat, which were first analyzed twice on the EVA1 instrument and then sent to the Strömsholm Referral Animal Hospital in Sweden where they reanalyzed the samples using a validated reference method.

Optimering av indunstningsprocess

The wastewater treatment plant at GE Healthcare's facility in Uppsala deployed a three step vacuum evaporator in 2007. The purpose of this was to pre-treat wastewater containing amines. The purpose of this thesis was to optimize thisprocess by reducing the amount of concentrate without releasing more nitrogen tothe environment and to examine if density could be used as a measurement of whenthe process should be ended.To create a foundation for optimization six test cycles were conducted with samples taken from all three steps. Both concentrate and condensate were tested as well as the incoming solution. Furthermore, the thesis has been expanded with a benchmarking part examining two different evaporators.

Oäkta Goodwill: Den oäkta goodwilldelens effekt på nedskrivningar av koncerngoodwill

Since January 2005 new rules have been introduced from the International Financial Reporting Standards for accounting of Business Combinations. Goodwill, which is the difference between the purchase price and the value of the net assets in an acquired firm, should no longer be amortized but should instead be treated as an object for yearly impairment tests. Nevertheless, there are many companies making the tests but not impairing goodwill. The theoretical frame of reference looks at goodwill from its two parts; true goodwill and false goodwill. False goodwill is defined as a measurement bias and constitutes a certain percentage of the operating net assets.

Pilotinstallation av fast och fjärravläst nätstationsmätning : Identifiering av för- och nackdelar med nätstationsmätning, Mälarenergi Elnät AB

Today?s electrical grid companies understand that better knowledge of and information about their grid can help realize a smart grid network. One way to gain better knowledge and information about the low voltage network is to install measuring equipment on the substation transformer´s secondary low voltage side that measures the low voltage network losses for that specific substation. By doing so, grid companies can, due to the calculation of the low voltage network losses, identify and address issues such as illegal power dissipation, unmeasured power outtakes, and unsatisfied technical documentation for the substations low voltage network.During 2012, Mälarenergi Elnät AB had a total electrical network loss (both medium and low voltage network losses included) of three to four percent of their total distributed electrical volume. Converting this energy volume into a monetary figure this accounts for a loss of around 30 million Swedish crowns.

Förstudier av kommersiella fastigheter : En analys av arbetssätt ur ett projektledarperspektiv

This thesis is written at WSP management and investigates the practice of pre-project planning and feasibility studies at Swedish construction companies, through the study of the ongoing feasibility study of the mall Sturegallerian in Stockholm, and through interviews with experienced project managers in the construction industry. There is currently a big span in the way Swedish construction companies plan the pre-project phase and the aim of this thesis is to present a more generic and standardized way that helps minimize project risks and maximize efficiency and profit. The result is a generic model which can be used in pre-project planning. The model describes the phases in the preproject planning process and the activities that span these phases. Is also describes the categories of professions that need to participate in the preproject planning group and which activities that each profession executes. The other result is a list of factors that need to be considered for a well performed pre-project phase, as found during the interviews. Among others the thesis stresses the importance of involving the client as a key participant in the process.

Hastighets- och positionsinterface för motorer

The environmental requirements and laws on combustion engine emissions are very tough today andthey will become even more stringent in the future. To achieve these requirements there are highdemands on the control systems for these engines. An improved precision in the measurement of anengine's speed and position gives the electronic control system an even better timing when it comes tofuel injection and ignition. This makes the engine more fuel efficient, reducing the emissions. This thesisis part of a collaborative project between Hoerbiger Control Systems and subsidiaries.

Willingness-to-Support

The purpose of this thesis is to define and theorise willingness-to-support as a possible measurement of corporate reputation. The knowledge production in this thesis is done through reasoning with companies to gain a deeper understanding of the social world and the respondents? view of their reality. Grounded theory is used as an inspiration for conducting the research. A qualitative method is used in the form of semi-structured interviews with six companies in three different business sectors.

<- Föregående sida 11 Nästa sida ->