This project includes development of new packaging for dry spices and an investigation of how to automate the production line. The preliminary investigations show needs of an environmental friendly packaging possible to re-close. After screening for suitable materials three concepts were developed, a stand-up pouch, a plastic jar and a metal can. The pouch was excluded in a concept choosing process. In this process it was also decided to further develop the metal can concept.

This work consists of two studies. One is based on an inquiery to nurseries with production of woody plants, and the other on visits to gardencenters, primarily in Skåne but also in Stockholm. Inquieries where sent to 87 nurseries, 48 of them replied. The purpous of the inquiery was to make a thorough investigation of the ligneous production at the Swedish nurseries, what is produced and in what quantities. Within the inquiery was also a thorough look at the fruit tree production. This to be able to conclude what cultivars that are produced and how large part of that production that is certified according to the Swedish Board of Agriculture (SJV).

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

At present, the Swedish pig industry is in transition. Prices have been low, but feed prices have increased. Therefore, many pig producers have stopped their production. Producers that lack an integrated production may contract piglet?s producers, or may use the mediation services that slaughterhouses provide.

Vägar och järnvägar är viktiga transportsystem som har stort påverkan på vårt vardagliga liv. Att fortsätta utvecklingen för att skapa större förståelse för hur dessa konstruktioner påverkas av nedbrytning är viktigt för att inte skapa långlivade konstruktioner som inte uppfyller morgondagens förändrade krav. Hos konstruktioner som består av ballastmaterial beskrivs nedbrytning orsakad av yttre laster främst som förändringar på jordmassans egenskaper. Ett steg i riktningen för att bättre förstå nedbrytning är att beskriva de kornformsförändringar som uppkommer. Ett antal beskrivande storheter för kornform presenteras: soliditetcirkularitet, aspect ratio, roundness och .

Maize for silage has been used as fodder in different parts of the world for a long time and has recently become more common also in Sweden. Our cold climate has been a problem as maize is very sensitive to low temperatures and frost. With new varieties and better techniques for cultivation it is now possible to grow maize in the southern and middle parts of Sweden. As for the north of Sweden the length of the cultivation season is a limiting factor as there are too few days with temperatures of over +10 ºC. Maize is well suited for silage making but oxygen-free conditions are required.

If Sweden want to be able to compete internationally with its production capacity,it is important to work actively with production development and production ofresource-and time-efficient. This report is a bachelor thesis of 15 hp conducted atthe University of Halmstad. Using the principles of continuous improvement andLean Production, the author developed a concept for HAGS Aneby AB to changeto the customer order driven assembly of spring toys.First of all, the theories of Lean Production, logistics and ergonomics are used tobuild and present a theoretical framework for further examination. Then, toachieve the target, the current assembly process is analyzed to develop some firstconceptual ideas for improvement. In order to develop the best advice, theconcepts are evaluated against the company?s requirementsThe developed action plan gives recommendations on how the company shouldrestructure their assembly process and the organization of the related departmentin order to produce spring toys in a more time efficient and lean way.

Nowdays an efficient production is critical to achieve for companies competing on the market for steel cutting tools. One of such companies is Halmstad based Tooling Support Halmstad AB that manufactures threading-taps, threading-dies and parting off tools, towards a centralized warehouse in Schiedam, Holland. The large amount of different products, approximately 2500 is a big contributor to the problem along with a new order system that creates a demand of low setup times. Previously the company was forwarded orders through quarter based prognoses which enabled planning of the production over a longer time span. Currently the newer order system ZENIT is in use and the company thereby gets their orders weekly.

This paper evaluates the prospects for utilizing aquaculture effluents as a nutrient source in organic hydroponic, as is the case in aquaponics. The development of organic hydroponics is dependent on replacing synthetic fertilizers with organically derived nutrients, such as those found in aquaculture effluents. Also, in hydroponic cultivation the establishment of a plant pathogen suppressive micro flora is part of the plant protection strategy. Therefore, both nutritional and microbial qualities of aquaculture water and organic hydroponic nutri-ent solution were analyzed and compared. Results showed both aquaculture water and or-ganic hydroponic solution to be deficient in a number of essential elements, although or-ganic hydroponic solution was closer to recommendations.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

Objektet för min studie är Pow-Wow, en grupp som arbetar mot rasism och mobbning på en svensk grundskola. Syftet med uppsatsen är att genom en kvalitativ undersökning titta närmare på hur Pow-Wow, har startats, genomförts och utvecklats. Utgångspunkten är att liknande grupper som arbetar mot rasism är sällsynta i svenska skolor. Därför är det speciellt intressant att titta närmare på hur det kommer sig att Pow-Wow startades på skolan och varför verksamheten har kunnat överleva så länge. För att kunna besvara dessa frågor har jag intervjuat skolans nuvarande rektor, skolans före detta rektor, de två lärare som arbetar med Pow-Wow och en elev som var med under Pow-Wows första år.

Lean Production har sedan länge enbart varit förknippad med tillverkningsindustrin och främst Toyota genom Toyota Production System(TPS). På senare år har Lean Production i allt högre grad introducerats och integrerats i tjänsteföretag under beteckningen Lean Service. Bankbranschen är en bransch där aktörer globalt anammat de bakomliggande filosofierna av Lean Production och Lean Service. I det här arbetet har en undersökning gjorts kring huruvida Lean Production existerar inom svenska banker och om så är fallet hur filosofierna inom Lean Production präglar bankerna. De tre bankerna som valts för undersökningen är de svenska storbanker Nordea, SEB och Handelsbanken.

One of the most distinguishing features of contemporary globalisation is production fragmentation, a splitting up of the manufacturing of a good into several different stages. Production fragmentation creates new opportunities through vertical specialization; a country incapable of mastering the entire production process may specialize in the manufacturing of one separate part. The aim of this thesis is to examine to what extent international integration affects a country?s ability to engage in vertical specialization in an industry characterized by production fragmentation. The analysis focuses on the european integration process over the last decade, where countries in eastern Europe with relatively low labour costs have been integrated with more capital abundant western economies.

Our understanding is that responsibility is shifting from the community towards the individual within the field of social work. This resulted in our essay, which aims to study how the representatives within social service assistance and churches in Helsingborg work with personal power. Our aim is also to illustrate how these representatives view the boundaries of responsibility between the individual and the community. Our questions are: How do the representatives work with personal power from a micro and macro perspective? How do the representatives look upon their position as representatives? What do the representatives consider as responsibility of the individual respective the community? And; Are there preventing factors from individual responsibility? We obtained our empirical material from a qualitative method consisting of interviews.