Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

The purpose of this master?s thesis is to examine how comics, here defined as a combination of text and images, are handled by the libraries in regards to subject analysis, classification and indexing. A comparative approach has been used in this study. First, common practices, methods and theories concerning subject analysis developed for documents consisting of text or images are presented. Then the current systems at two special libraries, specializing in comics and consequently dealing with both text and images, are examined and related to the above mentioned practices, in order to discover differences and similarities.

In this essay I have examined text, speech and action in Chekhov's Three sisters, as well as how the characters express their wills in action and in speech. I have used different methods such as action analysis, the five W questions and BSI (background, situation and intention). These methods are similar to those actors use to uncover situatedness of characters and to find motivated and intentional patterns behind their actions.I have used these techniques to identify the plot, explore what happened before the plot begins and to read the text in terms of action. The aim was also to find the counter points where wills expressed in action are contradicted by wills expressed in speech. Using these methods I found that the characters in Three sisters manage their lives dreaming about the future or recalling the past, except the character Natasha.

Att sluta eller inte sluta? En litteraturstudie om tobaksavvänjningsmetoder Bjellman, K. Tobaksbruket har en lång historia, och de tobaksrelaterade sjukdomarna kostar samhället miljarder i sjukvårdskostnader och produktionsbortfall varje år. Andelen rökare minskar stadigt i Sverige, idag röker ca 15 procent av befolkningen. Resultaten från olika metoder för tobaksavvänjning är tämligen blygsamma, och ugefär nittio procent av de som slutar röka gör det på egen hand.

This paper deals with archaeological prospection of an Iron Age farm site in Toland, Fresta parish, Uppland County in Sweden. The purpose of the paper has been to see whether the geophysical methods applied (GPR & EM-38) could produce useful results that could motivate its use in similar surveys in the future. Geochemistry has been used for the purpose of identifying possible activity areas on the site. The results have shown that it is possible with a GPR survey to identify postholes originating from the Migration Period longhouse at the site. The combining of several methods have been important for the identification and interpretation of several areas of interest..

Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

Cycle time has a direct influence on number of returnable crates needed and therefore a crucial parameter for cost structure and pricing of the user fec in the pool system.For providing the growing market, number of crates has to increase as well as the utilization of existing crates. To accomplish this aim, cycle time for the whole supply chain has to be fully unravelled and understand.The purpose is to map cycle time and stock movements, to see how, where and when crates are being used in the supply chain. The goal is to make a method of cycle time calculation, together with suggestions of improving the pool system and decrease cycle time.The study has been a combination of qualitative and quantitative research and comprises the three biggest wholesalers in Sweden; ICA, Coop and Axfood. Furthermore have 65 grocery shops, connected to the wholesalers, been investigated and mapped.The study has come to a conclusion that cycle time for an average returnable crate is 19 days. The full-size and half-size crates have a bit longer cycle time, 21-22 days, while Dual Height-crates and shallow haif-size crates have 17-18 days.

Today you can pay in many different ways. You can for instance use cash, credit cards, internet and now even with your mobile phone. Today we can also see new types of technical payment solutions being developed, such as Near Field Communication (NFC), mobile banking or through the use of QR-codes. We have today many different payment methods; therefore it?s interesting to see which payment method people prefer the most.

The sun is an endless energy source and the heat it produces can be used to heatup our homes. This technology is relatively old and was introduced in the late70-s. There are two kinds of solar collectors that are most frequently used todayand these are plain solar collectors and vacuum solar collectors. The plain solarcollectors are the once that are used the most but the vacuum solar collectorshave increased more as a percentage the last couple of years.The biggest question asked regarding an investment in solar heating is if theplant is economically profitable. This question has no direct answer because itis dependent on a couple of prerequisites.

European Union has made a new decision that all new built houses by 2020 shallbe near-zero energy houses. Boverket?s definition of near-zero energy housesintends buildings with good energy performance in which a proportion of theamount of energy that must be added to the building is made of renewable energy.Passive House is a set of requirements from FEBY designed to build energyefficient buildings. This is achieved by reducing loss of heat through the buildingenvelope and to take advantage of the passive heat from solar radiation,installation and heat sources like people living in the house.This project has been made with help of Anebyhus and one of their model houseshave been examined from the report?s issues, including Anebyhus?s energyperformance, requirements for the manufacturing and assembly, how theenvelope must be improved to fulfill the requirements for the Passive House andwhat energy calculation programs are available on the market.The report aims to provide solutions for energy efficient houses that are adaptedfor production of house building.Two visits to Anebyhus has been done to study their manufacture and assemblyof building elements.

The aim in this thesis is to use carbon, nitrogen and sulfur isotope analysis on teeth and bone to track diet and mobility of the population as well as the individual level from the articulated and disarticulated individuals from the passage grave Frälsegården, situated in Gökhem parish in the region of Falbygden, western Sweden.50 human samples were analyzed from tooth, mandibula and femur, together with 11 faunal samples from different bone elements of local wild and domestic animals.The results fall well in line with earlier stable isotope work done on passage grave individuals from Falbygden in stable isotopes: A homogenous group with a diet which was clearly terrestrial and lived on a pretty high trophic level. It also seems that the analyzed individuals deliberately focused their food intake to the cultural and natural, megalith and limestone landscape of Falbygden, and not to its surroundings, even if the passage grave is situated in the outermost areas of the region.A small study compares the sulfur results to with earlier work done on strontium isotopes. The results show that the different methods might provide a deeper understanding in the interpretation of the methods, and therefore suggesting that further work should be done to compare the methods..

 We have chosen to write our thesis within a transport company. The work was carried out at DHL activities in Uppsala. DHL is one of the leading transport companies worldwide. Our interest lies in more efficient and advanced transportation and terminals, as globalization and new trends require effective solutions.The aim of our work is to explain the need for information technology applications in road haulage and associated terminal operations. Furthermore, we analyses terminal and applied information technology.

There are several methods avaliable to find areas of interest, but most fail at detecting such areas in cluttered scenes. In this paper two methods will be presented and tested in a qualitative perspective. The first is the darg operator, which is used to detect three dimensional convex or concave objects by calculating the derivative of the argument of the gradient in one direction of four rotated versions. The four versions are thereafter added together in their original orientation. A multi scale version is recommended to avoid the problem that the standard deviation of the Gaussians, combined with the derivatives, controls the scale of the object, which is detected.

Goal: To describe which evaluation method is used by Swedish retailers to assess a potential retail location and to describe to what extent the retail brand effects this strategic decision. Design: Analysis of ten interviews with companies within five retail sectors in Sweden. Main study: Indication of what methods are used to evaluate a location and how a company's retail brand affects the decision. Results: Retailers use a mix of theoretical methods to evaluate the location attributes and possible profit. Most common among mixtures was an application of the analog method, residual method or the checklist method in combination with a financial assessment.

The project was carried out together with OC Off Course who manufactureand distribute mainly electric bikes.In today?s society, alternative sources of transportation becomes more andmore present and several bicycle sharing programs arises in major citiesacross the world every year.Something that doesn?t exist too much as of yet is bike sharing programsthat uses electric bikes. An electric bike is a convenient way oftransportation as well as a good way of avoiding traffic. With an electricbike you avoid having to sweat when biking over hills or when you need totravel over longer distances.The goal of this project is to develop a bike sharing station according tothe functions need to be met.This thesis Is based on Fredy Olsson´s methods principkonstruktion aswell as a couple of concept generating methods from Kenneth Österlin.From this, a number of sketches were made that later was evaluated inseveral steps in conjunction to a set of specifications. A 3D model of theselected concept was later made in CatiaV5 for a complete product..