The aim of this study about wind power planning in forest was to examine the factors and restrictions, which represent technical limitations, biodiversity, tourism and amount of energy for wind farms in Kronoberg County. Suitable areas for wind power were identified from the collected information about planning principles and potential conflicts. From the suitable areas the potential energy gain is calculated. Methods used were mainly a literature review, interviews with experts and practitioners, GIS analysis and a rough calculation of the energy gain. The section of information and facts describes in general wind power planning and possible conflicts.

Today?s system to measure the volume in a tank consists of a vertically placed sensor. When a vehicle is tilted the level of the fluid might change and if the volume is calculated based only on the information from the sensor it could result in a incorrect value.This thesis exams a new method to calculate the volume in tanks by using sensor fusion to crosscheck the i formation from the level sensors when the vehicle is tilted. The information is then used to see if it is possible to identify the grade of tilt by the change of fluid level. If the grade of tilt can be measured then the volume can be calculated in a more accurate way.

Efficient numerical methods for option pricing is an active field of research. This project has the goal to examine possible ways to improve an established method of numerical pricing. The method is based on an adaptive finite difference method in price and uses the backwards differentiation formula of order 2, BDF2, in time. The project will focus on improvements to the time integration through implementation of discontinuous Galerkin methods, dG. Empirical convergence and accuracy results are obtained for equidistant dG-methods up to order 3 and performance is compared to BDF2.

In this diploma work the approach of determining the required amount of reinforcement in slabs exposed to pure tension is processed, on behalf of Ramböll Uppsala. It is a well-known problem in the industry that there are uncertainties in the determining of the amount of crack reinforcement, especially for structures exposed to pure tension. Cracking caused during the time of dehydration in concrete slabs is the most common defect according to statistics made by CBI[1], which provides numbers as high as 35 % of all the defects caused on slabs are generated by cracks. Comparisons between Sweden's former national standard BBK 04, Building Regulations for concrete structures due to restrained forces of shrinkage, and the current European standard Eurocode 2 are carried out through theoretical studies and concludes with several examples of calculations. Rigorous calculations of both standards, BBK 04 and Eurocode 2 with application of the national annex in Sweden and Denmark are performed.

This thesis compares four relevance feedback methods. The Rocchio and Ide dec-hi algorithms for the vector space model and the binary independence model and Okapi BM25 within the probabilistic framework. This is done in a custom-made Information Retrieval system utilizing a collection containing 131 896 LA-Times articles which is part of the TREC ad-hoc collection. The methods are compared on two grounds, using only the relevance information from the 20 highest ranked documents from an initial search and also by using all available relevance information. Although a significant effect of choice of method could be found on the first ground, post-hoc analysis could not determine any statistically significant differences between the methods where Rocchio, Ide dec-hi and Okapi BM25 performed equivalent.

Shear Strength and Deformation Characteristics of Uppsala Clay with CRS and Standard OedometerTyra Morell Bonin & Magdalena MählerTo see how much a clay compact under different pressure one can use several different methods and in this project, two methods were used, the Standard Oedometer and a CRS apparatus. A Standard Oedometer is a full-time manual device and the CRS apparatus is a modern electric and automatic device. The aim of the project was to see similarities and differences between the two methods and examine which method that were most reliable. This has been done with repeated laboratory tests and afterward evaluations. With this information one can get a picture of how the clay will behave and how it will deform in nature.

The purpose of this report is to increase the awareness about the problem that occur when the waste hierarchy is applied to management of contaminated land. The work with remediation of contaminated land in Sweden is part of the efforts towards reaching the national environmental objectives. Therefore a subsidiary aim is to analyze how this influences the prospects of reaching the objectives. The work consists of two parts; a case study and a comparative literature study that focus on England, the Netherlands and Sweden. The case study is intended to provide a practical perspective through a comparison of the climate impact from two methods.

AbstractThis paper discusses how system development methods today support communication between system developers and their customers and end users. Today there are many system development methodologies with different aims and emphases. It is difficult, however, to find among these methods those who promote good and effective communication with customers because so many of these are very technically rooted and not as much directed towards the soft aspects of systems development - i.e. Human aspects. Our own experiences tells that a simple interview can be initialized without us having an idea what to ask the customer about or how to structure it up - nonetheless it?s done, but the outcome is just chance.

FYROM has a long tradition of producing wine. Wine production in FYROM is one of the greatest contributors of the agricultural share of their GDP. The aim of the thesis is to see if the wine production in FYROM has a comparative advantage compared to other countries that produce wine and if FYROM is able to sustain the advantage in the future. The countries chosen for comparison are Bulgaria, Croatia, France and Italy. The methods used in the thesis are the Balassa Index and Porter?s Diamond of National Advantage.

Systems development methods mirror different organizational perspectives, and not all methods are formalised, but what they have in common is the purpose of structuring and supporting systems development processes. Which method would be the most suitable may be determined by the systems development context at hand, because every systems development context is unique. Information is a valuable asset in today?s organizations, and it needs to be protected against both internal and external security threats. In our essay we aspired to find and present suggestions as to how systems developers can include security in the very design based on formalised systems development methods to create systems that are better prepared to meet the security challenges of today.

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.

The automotive industry is increasingly studying lightweight solution in their designs, also rational production and low costs in materials and manufacturing methods are of great interest. This thesis consisted in the practical evaluation of anchors for sandwich panels. The object was to study loads of shearing and pull out of the plane. The experiments were carried out on panels made up of 1mm aluminium coatings and 50mm extruded polystyrene (XPS) at its core. As the fasteners used simple methods such as blind rivets, screw and glue.

The examination has been performed at Bjerking AB, which is an architectural and engineering company. Bjerking AB has the ambition to be a member of Green Building.The Green Building program developed in year 2005 by The European Commission, the program is an environmental system with the aim to improving energy efficiency within the sectors of non-residential buildings. The minimum requirements to participate the program are following: in new-built buildings the calculated energy consumption must be 25 % lower than the requirements in the BBR (Building regulations) and in refurbishment the reduction must be 25 % lower than before the optimization.The aim of this study has been to examine and review the company Bjerking AB's energy efficiency work in the project of building the school/kindergarten S:ta Maria Alsike, where the goal is to get this building Green Building classed. A description of requirements to become a member of the Green Building has also accomplished in the thesis.The methods performed in this study are literature review, searches on the Internet, studies on the project database for facts/values, calculation of energy consumption and interviews of members of the Green Building. The following issues have been dealt with in the report;-          Did the building in the project manage the requirement to achieve an   energy consumption that is 25% lower than the requirements in BBR?-          What technical measures/system was selected in the building?-          What kind of cooperation was the project based on?-          What is required for consultancy companies and real estate owners to become members of the Green Building?The study of the project and calculation of estimated energy consumption in the building, give the result 47 kWh/m2, year.

This paper set out to investigate how teachers of Swedish in Sweden implement the grammar objectives of the curriculum in their teaching, through interviewing six teachers. It has been important to compare their methods to modern research of grammar teaching and teaching in general. They have been asked a series of questions to answer whether or not they use grammar terminology as mediating tools, if they intergrate dialogue among students in grammar teaching and to what extent the teachers? knowledge of and attitude towards grammar influence their teaching methods. The results show that grammar is used as mediating tools primarily when it comes to feedback on pupils? texts, though not to a great extent; dialogue between pupils is rare when it comes to grammar teaching; and the teachers? grammar knowledge and attitude affect the teaching methods, primarily in the sense that seeing value in grammar knowledge increases the teacher?s desire to develop new methods for grammar teaching..

The issue about how Scania shall perform HVAC tests in the climatic wind tunnel CD7, which Scania is about to complete by year 2013, has resulted in four test methods for truck HVAC and also a test method structure. The test methods have been chosen to focus on sun, snow and rain simulations. These are adapted and developed according to what should be tested and to what can be tested in CD7, which has been the object. With CD7 different climates can be simulated in a controlled environment for complete truck level, from desert with high sun load to arctic cold and snow.The test methods represents a basis to start from, for designers and test engineers which make the testing more repetitive as well as time eventually can be saved. Before the test methods can be applied they must be verified as they are based on theoretical and empirical assumptions.