This thesis is an investigation of Iranian immigrants and their use of libraries in Sweden. It isbased on a combination of a qualitative and a·quantitative method.Using a qualitative method, I give an outline of the history of lran from ancient times up to the present, as well as the different ethnological groups in Iran and their cultures. The main objective of this part is to clarify the contrasts between Iranian and Swedish cultural, social, linguistic and family structures, and also the characteristics of the crisis that most immigrants go through on their arrival in the new country. The qualitative method also involves structured telephone interviews with eight highly educated Iranians.This method was supplemented by a quantitative study through questionnaires of the attitudes· of lranian immigrants to libraries and reading. Iranians in Sweden turned out to be frequent Iibrary users.

In order to avoid harmful substances ending up at the municipal sewage treatment plants, it is important to purify the wastewater at the source. One such source is the wheel washers available in many tire garages which are used to wash the wheels on our vehicles when we change between summer and winter tires. It is important to wash the wheels before storage, to extend the tires lifetime. The purpose of this study is to find a green innovative solution for reduction of emissions of heavy metals at the source, so that the sludge from the sewage treatment plants can be used as fertilizer. The target is to find a wheel wash method which leads to compliance with the guidelines for car washers, and that also provides a better washing result than with the existing method.

Compressed air is an energy source that is widely used in today's trucks and buses.Compressor located next to the engine supplies the pneumatic system with the compressed air and is lubricated with the engine oil. Some of the oil follows the air flow in both liquid and solid phase. The solid phase, namely the carbon particles are created due to the high temperature in the compression chamber.Oil- and particles carryover softens and destroys the rubber material in the air valves and disturbs the mechanical function of various components in the pneumatic system. In order to reduce oil- and particles carryover is an Air Processing System (APS) set downstream the compressor.No method for establishment of oil- and particles carryover from the compressor exists at the moment. Therefore the filtration efficiency of APS is currently unknown.

Research is a time-consuming endeavor which requires appropriate tools to manage often vast amounts of information. Militarization 2.0 is a research project aiming to explore Militarization in social media. The aim of this project is to design a user interface for supporting researchers in projects involving large amounts of data in qualitative studies. The project will follow the design process of the first version of the Militarization 2.0 research database interface. The design process involves user studies, interviews and design and testing of paper and digital prototypes.

The financial crisis in the beginning of the 1990´s the financial crisis had a strong impact on the Swedish economy. Some of the main actors in the crisis were the largest banks of Sweden which brought a huge amount of losses on themselves. One of the main reasons for this was that the banks focused on volume increases rather than on credit losses. The credit analysis process is performed differently these days and it is the development of this process that is the focus for the authors.This thesis is about the credit analysis process in the four largest banks of Sweden. The purpose of the thesis is to highlight which factors the banks include in the credit analysis process and in how small and medium size companies are treated in this process.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER).

The objective of this study is to understand how people with psychiatric diseases who are enrolled at a psychiatric clinic experience the recovery process and which internal motivations and external factors influence the process. The study is based on interviews with five people who have been enrolled at a psychiatric clinic. Another aim of the study is to understand how the importance of the outpatient care for the personal recovery and the improvement opportunities of the support from the rehabilitation unit that the interviewees see. The study is qualitative and abductive approach was chosen. This means that the study is based on empirical data supported by established theories.

  ABSTRACTThere is a limited possibility for many of the concert-goers to go behind the stage and follow the work process with putting together a program for the concert season in a concert institution. The purpose of this study is to describe a concert institution's work with developing a concert program for each season. This is done through a presentation of the factors affecting the work. This is a descriptive essay and a case study of the Malmö Symphony Orchestra. Interviews have been made with people directly involved in the work or affected by the outcome of the work process.

Increased competition in the IT industry has sparked a need for developing faster innovation processes with more predictable output. One of the biggest issues when it comes to achieving a faster flow through the innovation process lies in managing its high degree of variation. Proposing a solution to this problem, Lean Software Development (LSD), was developed to provide a framework for how IT companies should organize its software development process to achieve increased speed and quality. This study examines to which extent LSD, as a set of values, principles, methods and tools, can be used to improve flow efficiency in the innovation process. A case study of a multinational IT company was made by conducting ten semi-structured interviews with current employees.

 The purpose of my study is to illumine the aesthetic learning process significant in the preschool. Focus has been on allowing educators in different preschools to answer questions valid the use of aesthetic learning processes. I chose to do my study using an opinion poll and a literature review. The result shows that the preschools use aesthetic learning processes and according to the educator?s aesthetic learning process is a very important tool for education in the preschool.  The notable in this study is that the educators have different views of what aesthetic means. The first view is that you only work with aesthetic subjects.

The project has sprung out of my imagination. I wanted to find out what happened to my creativity, and my way of making product design if I used the method of putting myself into a fictive world. The project has taught me to rely on myself and my knowledge as a designer.I have made a chair which closes out sounds and gestures in public places. A chair which provides you with peace and quiet in a busy environment..

Introduction: The work process of a consultant can be divided into five different stages, where the entry stage is the most important when linking the subject to legitimacy. A great deal of research regarding legitimacy exists, although within areas outside of consulting. Through examining consultant's and potential client's perception of what legitimacy is and how it is created we can determine the importance of the phenomena in building a business relationship between these parties. Research question: How does legitimacy arise between a consultant and a client in the entry stage of a work relationship? Purpose: The purpose of this study is to develop a deeper understanding of how legitimacy is created in the initial stage of a new consultant/client relationship. We also intend to examine the qualities and circumstances which lead to a consultant to acquire an assignment. Method: We have, from an inductive approach of research, collected empirical data in order to gain a deeper understanding of legitimacy in the initial stage of a consultant/client relationship.

Aim and questions: The purpose of this paper is to clarify the responsibilities employers have for rehabilitation and to explore how it conforms to an employers' actual condi-tions. Furthermore, the intention is to increase knowledge of how employers interact with other partners in the rehabilitation process and what affects sick people to return to work. The following three questions form the basis of this paper: What are employers? responsibilities for rehabilitation under the law and how is it consistent with an employer's actual conditions? What is the role of employers in the rehabilitation co- operation with other actors? What factors influence sick people to return to work?Method: The paper has used a true scientific and a legal sociological method to examine how the regulated employer responsibility for rehabilitation relates to what is practical in re-ality. To achieve the purpose, four empirical interviews were conducted with Örebro Municipality, Insurance, occupational health Previa and a doctor, which all of them have an important role in the rehabilitation process.