Sök:

Sökresultat:

8655 Uppsatser om Method of limits - Sida 15 av 577

Provmetod för olje- och partikelöverdrag från kompressor till tryckluftssystem

Compressed air is an energy source that is widely used in today's trucks and buses.Compressor located next to the engine supplies the pneumatic system with the compressed air and is lubricated with the engine oil. Some of the oil follows the air flow in both liquid and solid phase. The solid phase, namely the carbon particles are created due to the high temperature in the compression chamber.Oil- and particles carryover softens and destroys the rubber material in the air valves and disturbs the mechanical function of various components in the pneumatic system. In order to reduce oil- and particles carryover is an Air Processing System (APS) set downstream the compressor.No method for establishment of oil- and particles carryover from the compressor exists at the moment. Therefore the filtration efficiency of APS is currently unknown.

Betongbjälklag med limmad matta : olika behandlingars effekt på alkalitet, fukthalt och emissionsbildning

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER).

Jordbruk kontra industri : jordbruksregleringar ur marknadsstrukturmässigt perspektiv

What is the?self? and to become ?one-self?? To resolve this questions possibility I´ve been using the philosopher Søren Kierkegaard metaphysic paradoxes. This essay about the ?self? shows the reader the difference between describing a transcendent and immanent phenomenon and if it´s possible to become or to not become ourselves. The process is a key of the ?self? which Kierkegaard explains the ?self? in and for it-self.

Verkligheten från en annan vinkel. NIPIS-en produkt av en fiktiv värld

The project has sprung out of my imagination. I wanted to find out what happened to my creativity, and my way of making product design if I used the method of putting myself into a fictive world. The project has taught me to rely on myself and my knowledge as a designer.I have made a chair which closes out sounds and gestures in public places. A chair which provides you with peace and quiet in a busy environment..

Comparison between different freezing and thawing methods for human spermatozoa

Preservation of cells and tissues by freezing at temperatures below 70°C has led to new possibilities for the storage of germ cells for fertility preservation. During the freezing process problems might occur, the greatest being ice crystallization which can cause membrane destruction and thus cell death. To minimize this risk, solutions that reduce the freezing point can be added to reduce crystallization and increase survival rates. These solutions are called cryoprotectants. The best method for freezing is still not known.The aim of this study was to analyze the effect of various parameters on the survival rate of human semen frozen with liquid nitrogen.

Observiaire och film som analysmetod för cykeltrafik : En fallstudie på Götgatan i Stockholm där omställningen till supercykelbana utreds

The goal of this thesis is to analyse whether the method ?Observiaire? is of any use for traffic analysis. The method consists of analysing film material, preferably before and after changes are made to an area, by answering a survey for the users that are observed within the population. The method also opens up for deeper qualitative analyses which are rooted in the quantitative data collected from the survey-study. In this study we analyse the method by applying it to the case study of the changes made at Götgatan in Stockholm, where a green wave was implemented and the bicycle road widened.

En jämförelse mellan några multivariata data-analysmetoder

Very often the interesting variables are explained by several underlying variables and in statistical analyses it is common to study the relationship between variables and groups of variables. Because of this multivariate analysis is commonly used in both science and industry. There are two problem with both univariate and multivariate analyses. One is when the variables are correlated. The other is when the number variables of exceeds the number of observations which makes the matrices algebra used in the analysis impossible to execute.

Skattningar i gallringsskog med hjälp av flygburen laserskanning : beräkningar med massaslutenhet

This master?s thesis is a remote sensing study of an area-based method used to detect forest in need of thinning by use of laser data and field samples. Only pine-dominated forest has been included in the study and height limits were set to match empirical restrictions. The study area was in the municipality of Älvsbyn (Latitude 65° 40´ N, Longitude 21° 00´ E), in northern Sweden.The Swedish authority Lantmäteriet is currently laser scanning most parts of Sweden, providing new opportunities and applications. The primary aim of the national laser scanning is to create a new elevation model, useful in consequence analysis of climate changes.

Autonomi och gemensamma strävanden

The liberal state, it has been argued, must be neutral between different conceptions of the good. Embodying ideals such as fairness and impartiality, state neutrality is intuitively appealing, but working as a restraint for state actions it is somewhat unsatisfactory. People make mistakes about their lives and people live less valuable lives than they could do. To then restrain the state from doing as much good as it can seems just as unappealing as neutrality at first seemed appealing. In this paper, a possible solution to this dilemma is presented.

Change Lab - Att arbeta med lärande förändring

In order to be able to change, to maintain competitiveness as a company in a world where rapid changes is part of the daily life, it is crucial to have knowledge and methods in how to change. One method, originally developed in Finland, is the Change Laboratory. This method is said to be efficient, not only concerning change aspects but also learning, since change and learning in this method is intertwined. This Master Thesis (20p.) tells about the process of conducting a Change Laboratory with a Swedish high-tech company and analyses factors in the process that makes change possible..

En analys av kostnadseffektiva metoder för inköp och logistik

This thesis aims to find a more cost effective model for purchasing and logistics at asmall company. The studied company is a BMX (bicycle motocross) and MTB(mountain bike) retailer. The questions to be answered are: How large parties shouldbe ordered and what mode of transportation is to be used? A literature orientation ofthe field was followed by visits to the company, obtaining information from twodifferent logistics companies and interviews of four other companies in the sameindustry. The study shows that it´s difficult to develop an optimum order quantity fora small company since there often are other factors affecting how large amountshould be ordered.

Förskolans lekmiljö : En studie om hur pedagoger tänker om lekmiljöernas betydelse för barns utveckling och lärande

The purpose of my study is to describe how educators think about the play environment, the nature and its importance for the children's development and learning in preschool. The study is based on qualitative interviews with four active educators. The results of the study show that the teachers regarded the children's interests to a great extent when the different play environments were structured. They are also based on different themes that they have seen that the children were interested in, such as the fire station, hair salon or shop and café. Educators designing not only these play areas for different types of play for the children, but the different environments also have a learning purpose. The outdoor environment however attracts greater interest from children, to where they have more space to move freely in and outdoors, there are no limits to the children.

Skolsköterskors användning av MI-metoden

AbstractMI stands for Motivational Interviewing, the Swedish translation of MI is Motiverande Samtal. Adolescence is a period in life when challenges are encountered and pivotal choices are being made. It is during this period adolescents form their lifestyle, which have an impact for their health for the rest of their life. MI has shown to be an effective and appropriate method for school nurses within school health care, to utilize in approaching by adolescents with risk behavior. This is because it gives adolescence to take responsibility and empowers them to make decisions regarding lifestyle-changes.

Skolskötersors användning av MI-metoden

AbstractMI stands for Motivational Interviewing, the Swedish translation of MI is Motiverande Samtal. Adolescence is a period in life when challenges are encountered and pivotal choices are being made. It is during this period adolescents form their lifestyle, which have an impact for their health for the rest of their life. MI has shown to be an effective and appropriate method for school nurses within school health care, to utilize in approaching by adolescents with risk behavior. This is because it gives adolescence to take responsibility and empowers them to make decisions regarding lifestyle-changes.

Metodik för utmattningsberäkning av svets i vibrationsmiljö

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

<- Föregående sida 15 Nästa sida ->