This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

Control of a diesel engine equipped with Variable Geometry Turbine (VGT) and Exhaust Gas Recirculation (EGR) requires a multivariable control method. One problem is that the engine system is non-linear. Furthermore there are strong cross-connections between inputs and outputs and the inputs have alsoboundaries. To be able to manage these control problems, MPC has been used that is a multivariable method. The MPC-controller consists of an optimization problem and therefore MPC can find the optimum control signals in an easy way.

Since events of September 11 and the subsequent conflicts surrounding the event, the war against terrorism has been constantly present. It has been used several methods and strategies to address these threats, including a method current in use, the targeting method. The method refers to use few but precise attacks to knock out key functions within these organizations, mostly individuals in the higher command and control structures within these organizations. The effectiveness of the method has been put in question when the majority of the terrorist organizations continue their strife, in some cases even increasing its intensity. The purpose of this study is to investigate which role the higher command plays in these organizations ability to wage war.

Aim: The purpose with this study was to examine if there is burnout or symptoms of burnout among Swedish alpine coaches. The study would also investigate if the place of work have any meaning of developing burnout symptom or to become burnout. How the coaches think that their working situation could be any better is also going to be lightened.Method: The participants in this study were all full time paid alpine coaches in Sweden. Total amount of participator was 28. 13 of them worked on ski gymnasium, 4 worked on ski collage and 11 worked in SSF (Swedish Ski Federation).

This study investigates augmented reality using third person perspective and what precision can be achieved by using this method. There have been prior studies in regards to precision using augmented reality, however studies using third person perspective is scarce. This study presents a solution using a static camera capturing the user as well as the plane to augment from behind. This augmented image is then transferred to a handheld device that is held by the user. Using this method the user will be free to manipulate and work with the plane without removing the device that captures the scene, a common problem when using visual reference markers in augmented reality.

Studien bestod av två delstudier. Syftet med delstudie 1var att undersöka kriterievaliditeten hos tre frågor rörandearbetsplatskommunikation (kommunikationsfrågorna) och syftet meddelstudie 2 var att testa dess samband med utmattningssyndrom.Delstudierna baserades på enkätmetodik, där respondenterna för delstudie1 (n=83) var anställda inom primärvård och försäkringskassa ochrespondenterna för delstudie 2 (n=2223) var sjukvårdsanställda.Resultaten för delstudie 1 visade starka positiva samband mellan två avkommunikationsfrågorna och de testade kriterievariablerna från TeamClimate Inventory (TCI), vilket implicerar att dessa kan användas somsurrogatmetoder för TCI. Resultaten från delstudie 2 visade delstvärssnitts- och longitudinella samband mellan kommunikationsfrågornaoch utmattningssyndrom, dels att kommunikationsfrågorna prediceradeframtida utmattningssyndrom. Resultaten implicerar att välfungerandearbetsplatskommunikation motverkar utveckling av utmattningssyndrom..

The report begins with a general inventory of possible technical faults in a hydropower plant and of possible fault indicating measurements. Then an investigation is made concerning a few different faults. Based on this investigation a choice on seal box condition and water leakage is made as problem for a more thorough examination, in which it is concluded that the turbine water leakage is larger when the turbine is put into operation. The examination ultimately results in a computer alarm for faults related to the seal box. Finally a few things are mentioned about flow measurement and pressure measurement in relation to the project as a whole..

The freshwater pearl mussel (Margaritifera margaritifera) is threatened throughout its range. There has been a substantial decline of the species and one major reason is habitat degradation. We investigated how the substrate composition of the bottom floor affects the regeneration of the mussel by analyzing data from the Västerbotten County Board?s inventory of the freshwater pearl mussel. The results implied that fine material such as fine sediment and sand might be detrimental to regeneration whereas gravel and boulders and in particular stone seem to be beneficial.

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER). An improvement is only seen when the BER becomes much lower than what is common in real situations. In conclusion DDCE is complicated, involves many mathematical operations and gives insignificant improvement of SNR when BER takes common values. It is legitimate to question if it is possible to use the method in a real mobile phone system..

The aim with this study was to investigate the effects a change of manufacturing process would have on the mechanical properties of drill bits made of a WC/Co composite used for stone cutting. The method used today is sintering, where the material is heated in a conventional sintering oven. The other method was microwave sintering, where the material is heated by radiation in the microwave region. Also an investigation of the manufacturing cost were made.The main difference between the two heating methods is that the conventional way is a rather slow process and the microwave method is very fast. The material is also heated homogeniously in the method with mirowaves, aposed to the case with the conventional sintering where the material is heated from the outside in.This makes the material harder and more wear resistent.

Purpose/Aim: The aim of this study is to (1) analyze the amount of exposure disability sports get in Swedens biggest newspaper (Aftonbladet), (2) look at how Aftonbladet portraits disability sports and it?s athletes, and finally (3)  to see if there has occurred any change over time (during the last eight years). Material/Method: The first method used is a quantitative analysis to measure exposure.The second method is a quantitative content analysis which is used to analyze how disability sports are portrait.The third method is rhetorical and is also used to analyze how disability sports are portrayed. Main results: The study has shown that disability sports get very little exposure in Aftonbladet. The articles in the newspaper that cover disability sports are portrayed from a personal point of view without much focus on the athletes achievements regarding his or her sport.

This study was conducted in the Master program at The Music Pedagogical Center (MPC) at The Royal College of Music in Stockholm. Korta musikresor (Short Music Journeys) is the Swedish term used for a receptive method of music therapy adapted from the tradition of The Bonny Method of Guided Imagery and Music (BMGIM) and the theory and practice of Expressive Arts Therapy. The KMR method uses carefully selected short pieces of music, lasting between 2 and 5 minutes, to work on various psychological problems and life- crises. The music session is conducted in a slightly altered state of consciousness with a clear focus being established beforehand in a verbal dialogue with the psychotherapist. There is also the possibility of using artwork to process and explore the imagery after the music listening.

The purpose of this report is to investigate and compare the difference between stand-thinning machines and strip-road thinning machines, and how they affect the stand on behalf of future growth, theoretical economic result, wind impact, snow pressure and density of stand. The investigation is regarding the first commercial thinning of pine stands, after pre-commercial thinning that was well conducted. The investigation area was located near Katrineholm, Sweden. The measurements that were measured were strength of thinning and amounts of wind throws, snow-breaks and hauling damages. The results that emerged, was that thinning with strip-road machines had a significantly higher strength of thinning over all, as compared with the stand- thinning machines (45 percent versus 30 percent). Comparisons between wind-throws, snow-breaks and hauling damages of the stand could not establish any significant differences between the two methods that were investigated. Conclusions, over all, were that if forest owners want to have more timber volume left for second thinning and final cut of the stand, the forest owners should choose the method with stand-thinning machines. From the point of view of gentle treatment of the stand and ground damages the choice should be the same. However, the method with strip-road thinning machines is the most common and accessible method in Sweden. Most likely it is the most economical way to manage the stand for forest owners in present time. If the method with stand-thinning machines is becoming more common in Sweden, it is suggested for forest owners to consider the stand-thinning method as a candidate for treatment due to economic aspects..

I en allt mer föränderlig omgivning utgör innovation ett nödvändigt redskap. Syftet med denna studie är att undersöka om arbetskrav och arbetskontroll samt interaktionen dem emellan har en betydelse för ettgruppklimat som främjar innovation. Arbetskrav och arbetskontroll definieras i denna studie utifrån Karaseks teori om krav- och kontrollmodellen. Innovation definieras utifrån Wests teori om de fyra gruppklimatfaktorerna som främjar innovation. Resultatet baseras på en enkätundersökning med 83 respondenter fördelade på 20 arbetsgrupper inom den privata sektorn.

SUMMARY Establish a pasture There is many valuable nature and culture landscapes in Sweden that has developed during a long period of time, throw natural processes or human use. Unfortunately lot of these are disappearing. My thought with this work is to explore the possibility to establish new areas with similar qualities. The motive for this is that attractive countryside biotopes are well worth to use as model to enrich the urban landscape. Another thought has concerned the people that establish, build and manage landscapes and parks. They often have varied views, both coming from a difference in background and previous experiences.