Detta examensarbete gjorde jag för att försöka ta reda på vad ett riff kan vara, och vilken roll riffet har inom hårdrocksmusiken..

Today small metal parts are mass-produced as for example rollers in cylinder bearings. At high velocity cutting the metal is cut with a great force in a scissor-like device. Both precision and repeatability is important to be able to guarantee good quality, but from an economical point of view it is also important to keep a great manufacturing capacity. The part of the process that is most time consuming is when the metal bar, that is about to be cut, is fed to the right position. Therefore it is interesting to examine if the time used for positioning can be reduced.

Ensåsengruvan is a mine situated within Ljusdals municipality in central Sweden. Themine was in use from 1984 to 1991 and has since been undergoing a remediation program. Mine tailings from sulfide rich ore is a potential environmental hazard due to its tendency to cause acid waters and heavy metal leakage. Lake Ensjön is situated one kilometer from the mine area. Due to the hydrological conditions it was not expected to receive inflowing water from the mining area.

Lars Höglund AB is one of Scandinavia?s most qualified manufacturers of sheet metal products and provides custom designed products of very detailed precision. One of the main methods of manufacturing is laser cutting. When Lars Höglund AB signed up a new customer, with high demands in tolerances for the products, Lars Höglund AB thought it would be necessary to know the capability of the laser cutting machine. Also the process of how to retrieve this capability was interesting. The capability will be researched for the following elements: Cutting right angles in squares with a corner radius of 1 mmCutting corners which are not right angleCutting of circles with constant radius Measurements were made on 150 pieces of sheet metal details, which had been cut out by the machine.  The data from the measurements where later used to study the capability.

Poly- and perfluoroalkyl substances (PFASs) are a group of environmental contaminants that have gained increasing attention due to their potential to bioaccumulate, environmental persistence and potential toxicity. PFASs have been found in surface water, sediment, air, soil, sludge and ice caps globally, as well as in wildlife and humans. Furthermore, PFASs have also been detected in drinking water, leading to raised concerns for human health, since drinking water is one of the most significant sources of PFASs for the general population. Conventional water treatment techniques have shown to be ineffective removing PFASs, highlighting the importance for further research to develop efficient removal techniques. The aim of this study was to investigate the removal efficiency of PFASs in water using two treatment techniques; granular activated carbon (GAC), type Filtrasorb 400®, and anion exchange (AE), type Purolite A-600. Additionally, the effect of dissolved organic carbon (DOC) on removal efficiency was studied.

Since 2007, I´ve been working in the steel industry in a place called ?SSAB?. That?s why itseemed right to contact them for this thesis.The SSAB concern is global, but SSAB Sweden involves raw steel producing in Luleå, heavyplate producing in Oxelösund, and sheet metal producing in Borlänge..

Since 2007, I´ve been working in the steel industry in a place called ?SSAB?. That?s why itseemed right to contact them for this thesis.The SSAB concern is global, but SSAB Sweden involves raw steel producing in Luleå, heavyplate producing in Oxelösund, and sheet metal producing in Borlänge..

Since 2007, I´ve been working in the steel industry in a place called ?SSAB?. That?s why itseemed right to contact them for this thesis.The SSAB concern is global, but SSAB Sweden involves raw steel producing in Luleå, heavyplate producing in Oxelösund, and sheet metal producing in Borlänge..

AbstractThe research project Liberation, supported by the European Commission under the Environment and Sustainable Development Programme (Fifth RTD Framework Programme) aimed at developing a decision support system for ecological risk assessment of contaminated sites has proposed a tiered system including the triad method. This method integrates contaminant chemistry and bioavailability analyses with observed ecotoxicological effects in soil and groundwater. In this study the triad method was used to perform a risk characterization of a former surface treatment and metal industry, now used for the student union buildings of the Mälardalen University in Eskilstuna, Sweden. On the site, high concentrations of copper, zinc and nickel have been detected in the soil in a preliminary investigation of contaminant levels with XRF. For performing the risk assessment of the site according to the triad method, contaminant bioavailability, soil metal concentrations and soil toxicity were determined and an ecological assessment was carried out on four selected soil samples (one reference soil and three samples with low (B), medium (C) and high (D) contaminant levels). Contaminant bioavailability was measured through leaching (ISO TC 190/S7) and biouptake tests (DGT).

In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.

Highly polluted urban storm water from e.g. highways can contain large amounts of heavy metals that may cause harm if they are discharged into recipients. To remove the heavy metals a possible low-cost method that does not require much maintenance, could be the use of reactive filters with filter materials consisting of industrial residues or other cheap mineral based materials. Dissolved metal ions are removed by reactive filters through the processes of ions binding to active sites on the surface of the filter materials, or by formation of insoluble precipitates.The ability of CaO-treated granulated blast-furnace slag, iron oxide coated sand, olivine and nepheline to remove seven heavy metals (Cr, Cd, Cu, Ni, Zn, Pb and Hg) from urban storm water was studied. Initially batch experiments were performed where the effect of pH, dissolved organic carbon (DOC) and dissolved ions on the adsorption efficiency was studied.

Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.

The Arctic region appears as a pristine remote environment, yet there is increasing evidence that it is greatly impacted by pollution such as lead (Pb) and mercury (Hg). In this environment deposition of Hg has increased threefold since the last industrial revolution. In this study five cryosolic soil profiles within non-sorted circles (NSC) in the Abisko region, northwest of Sweden, has been analyzed to improve our understanding regarding how pollutants are distributed within such type of soil. The soil samples have been analyzed with the use of X-ray fluorescence analysis (XRF), for the measurements of the total concentrations of e.g. lead (Pb) and zirconium (Zr).

Till följd av den hårda utbyggnaden av vårt samhälle åtgår en stor mängd naturresurser. Samtidigt som samhället utveckas sätts allt högre krav på att det ska hushållas med naturresurser, inte minst genom införandet av miljömålet en ?God bebyggd miljö?. Enligt detta miljömål ska användningen av såväl mark som naturresurser ske på ett så hållbart sätt som möjligt. Samtidigt med detta skapar den svenska stålindustrin över en miljon ton slagg årligen, varav en stor del deponeras.

The views on and the knowledge of the introduction of iron to Scandinavia have change by the history of archaeology. The results and discussions are put in the context of time and how that time is reflected in their work and texts. This limits that scholars put up to orientate themselves conceal the complex reality. The limits are changing all the time and is dependent of time and person..