Trioplanex International AB is a part of the group Trioplast Industrier AB, which produces packaging materials for the film and hygiene industry. The group is active throughout Europe, where most of the production is located in Sweden, with head office in Smålandsstenar. Operations in Landskrona consist of Trioplanex International AB and Trioplast Landskrona.Semi-finished articles consisting of paper cores, so called bobbins, give rise to a high amount of core waste in any form of core cutting. The objective of the report is to map out all core waste and illustrate the material flow with regard to present layout and equipment.In the beginning of the project an analysis of the current process was carried out with focus on the cutting equipment. A case study in the form of an improvement work took place in order to reduce the causes which had the biggest impact on existing machinery.Improvement proposals were discussed by the author together with supervisor, assigner and other parties involved.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

The main purposes of this study were to 1) quantify bacterial production in winter during ice conditions, and 2) to compare these production measures with values measured from summer and open water conditions in three humic lakes situated in northern Sweden. Another purpose of this study was to 3) examine whether clear-cutting significantly affected bacterial production or water chemistry in two lakes situated in catchments were a large part of the forest had been removed through logging compared to an undisturbed reference lake. In winter (March/April 2014), the bacterial production ranged from 0, 7 - 2, 2 µgC/L/day and in the summer of 2013 the production values was 4 ? 10 times higher. The main reason for lower bacterial production in winter was ascribed to lower water temperatures as well as to older and more recalcitrant DOC, as there were no significant differences in total dissolved nitrogen or DOC concentration or -quality, that could explain a lower production compared to summer.

The aim of this study is to analyze the discourses of activists who work against female genital mutilation/cutting (FGM/C) in Tanzania. The study focus on the discourses that arise during interviews about FGM/C with five activists. To examine this we asked the following questions: What discourses are presented in the interviews? How do these discourses interact together ? are there any discourse conflicts? How do the activists talk about FGM/C in comparison to our western view? The study is based on discourse theory. We also use feminism and postcolonialism as theories in our analyze.

The interest for alternative forest regeneration methods increased significantly during the 1990´s after 50 years dominance of the clear-cutting system (Holgén & Hånell 2000). One reason for this was that clear-cutting was being more and more questioned by different envi-ronmental organizations and because the forest sector for economical reasons wanted to find cheaper ways to regenerate forests. In the beginning of the 1990´s two shelterwood experi-ments were established in a joint effort by Svenska Cellulosa Aktiebolaget (SCA) and the Dept of Silviculture, Swedish University of Agricultural Sciences (SLU). The experiments include various forms of cutting and shelterwood densities and represent productive spruce forests in central and north Sweden (Roggsjön in the province of Medelpad and Skikkis-jöberg in the province of Västerbotten, respectively ). The experiment next to Roggsjön has been reported earlier in three MSc theses, and is also the focus of this thesis.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

Control and comparison of various cleaning methods on restaurants in Södra RoslagenThe purpose of this report is to find out and analyze the efficiency of cleaning methods in restaurant kitchens. The investigation was carried out through unannounced inspections at 89 restaurants in Södra Roslagen (municipality of Danderyd, Täby and Vaxholm). ATP-measuring was done on a plate, a knife, a bench surface and a cutting board. The ATP-method measured the amount of food residue on equipment and working surfaces after cleaning, with a luminometer and swabs. Restaurant staffs were asked to describe in detail how and when the last cleaning was carried out on the surface.

Hammarby Sjöstad is a new district in Stockholm with high environmental standard. Stockholm Water Company evaluates a local wastewater treatment plant with cutting edge technology. The first step is an experimental treatment plant (Sjöstadsverket) with four parallel lines of treatment, each with a capacity to treat wastewater from 150 persons. Within the membrane technology subproject the possibility of using reverse osmosis (usually called RO) to regain nutrients is examined.Reverse osmosis separates the incoming water in a clean permeate and a concentrate that, as the name indicates, is a more concentrated version of the incoming water. Using this method in wastewater treatment, a solution high in nutrients can be obtained without the use of chemical precipitation agent and with no production of sludge.

This essay is an analysis of the objects made of bronze found in an excavation Västergarn parish, Gotland, in 2010, conducted by the University of Gotland. The studied material presented in this essay comes from contexts inside, as well as nearby the foundation of a medieval building which purpose is still not certain. The first purpose of this study is to present the bronze-objects found inside and nearby the foundation of house 6, and to see if there are any datable objects. There is also a discussion whether there has been any bronze-crafting in the area. The second purpose is to make a contextual analysis to see if there are any differences between the material found outside and inside of the building, and what conclusions can be made regarding the function and use of the building.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

Since 2007, I´ve been working in the steel industry in a place called ?SSAB?. That?s why itseemed right to contact them for this thesis.The SSAB concern is global, but SSAB Sweden involves raw steel producing in Luleå, heavyplate producing in Oxelösund, and sheet metal producing in Borlänge..

Since 2007, I´ve been working in the steel industry in a place called ?SSAB?. That?s why itseemed right to contact them for this thesis.The SSAB concern is global, but SSAB Sweden involves raw steel producing in Luleå, heavyplate producing in Oxelösund, and sheet metal producing in Borlänge..

Neoplasm 2.5D, is a project centered around exploring possibilities of combining various digital tools with the use of a lasercutter, to create intricate patterns withillusions of depth and texture, and to combine these studies into a working fullscale model that could be the basis for a future design product..

Since 2007, I´ve been working in the steel industry in a place called ?SSAB?. That?s why itseemed right to contact them for this thesis.The SSAB concern is global, but SSAB Sweden involves raw steel producing in Luleå, heavyplate producing in Oxelösund, and sheet metal producing in Borlänge..

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.