Lars Höglund AB is one of Scandinavia?s most qualified manufacturers of sheet metal products and provides custom designed products of very detailed precision. One of the main methods of manufacturing is laser cutting. When Lars Höglund AB signed up a new customer, with high demands in tolerances for the products, Lars Höglund AB thought it would be necessary to know the capability of the laser cutting machine. Also the process of how to retrieve this capability was interesting. The capability will be researched for the following elements: Cutting right angles in squares with a corner radius of 1 mmCutting corners which are not right angleCutting of circles with constant radius Measurements were made on 150 pieces of sheet metal details, which had been cut out by the machine.  The data from the measurements where later used to study the capability.

High-precision cutting in metal is very complicated, a lot of parameters affect the result: what geometries to be manufactured, surface roughness and tolerances to be achieved, batch size etcetera. When pull-broaching internal parts this might be even more important, than in any other cutting operation. Everything is machined in one single stroke and the general technology is built in to the tool, therefore big investments must be made to change the process. Milling for an example: one piece at a time is machined away, and a lot of parameters can be changed easily.It is very high pressure on the cutting-edge when the broach is cutting. To achieve the specified product and to avoid unnecessary toolwear it is essential to use the right cuttingfluid and the right cuttingspeed for an example.

In this study, the pre-tension force in an insert screw connection are examined in order to establish a greater understanding of the system and to facilitate the process of making new Metal cutting tools. Certain especially significant design variables such as the offset, the length of the contact thread and the shank length above the threaded hole, are selected to be closely examined. A comparison of the influence on the pre-tension force between threaded holes made with a worn, versus new, threading tool is also involved in the experiment. The study is limited to handling the screw sizes M2,5 and M3,5. The results show that a regression model, with good approximation, can be fitted to the measured values.

PURPOSE: To find out how identity creating and community utter within the Black Metal culture, to get an insight of why people are drawn to Black Metal, and what function it fills to the adherents/practicians.METHOD: Analyses of interviews done by the authors. In addition to them literature, mainly in book form, is used for theories.RESULT: We have seen that there are shared Black Metal values, despite a strong individualism within the culture. And death is important for the survival of the culture and the individuals..

Laser for material processing possesses a number of advantages which mean that it has been and will be an important component for a wide range of industries' future development. Cutting materials processing is the dominant use of laser technology and has revolutionized the manufacturing industry. The aim of this thesis is to describe the principles of Metal cutting by laser, how laser cutting is applied in practice and to identify how Swedish companies are using laser cutting. For the theoretical and technical description of laser cutting literature studies are the primary source of information. The empirical basis for the mapping of the Swedish industry for laser cutting is grounded on a survey; this includes Swedish companies that use laser cutting in their production.

This study is an attempt to investigate religious perceptions and its development, function and connection to religious practise within the Swedish extreme metal scene. This is performed mainly by a qualitative method of investigation, studying lyrical content published on a number of extreme metal albums, thereafter relating the lyrical progression to the progession of the scene as a whole and also to the development of individual religious belief and practise.The lyrically expressed manifestations of religiosity within the extreme metal scene prove to be related to religious practise in some cases, most visibly in the Christian parts of the scene.The study also indicates that development of religious expression often is evident regardless of religious preference. This development also regularly relates to an increase in musical evolution and prowess often achieved with increased age and maturity.Musically and lyrically, the extreme metal scene displays transgressive attributes which assist both individual and group in the process of creating identity, meaning and individuality.Experiencing extreme metal, in concert or in the privacy of one´s own home, can be one way of perceiving spirituality in this modern age..

The purpose of this paper has been to examine the heavy metal band Sabatons use of history and to relate it to societal trends in today?s Sweden. I have examined Sabatons music, album covers and music videos in order to define a certain use of history. To do this I have used a use of history theory and a heavy metal theory. My results showed that some of Sabatons use of history could be defined as commercial and that the societal trends in today`s Sweden have in some cases affected the selection and presentation of events and characters that`s been portrayed by Sabaton.

Min uppsats har visat på black metal-stilens betydelse för fyra ungdomars identitetsskapande. Jag har med koppling till teoretiska infallsvinkar och begrepp rörande stilars och kulturers betydelse diskuterat black metal-kulturen med fokus på dess stilmässiga uttryck, dess symbolanvändande och dess innebörd för ungdomarnas självbild.I min studie har jag diskuterat och redogjort för hur black metal-kulturen kan te sig genom att förklara hur musiken låter och hur stilens uttryck i form av kläder och frisyrer kan se ut. Uppsatsen har visat på hur symboler och kodsystem används av ungdomarna inom ramen för kulturen för att markera och positionera sin identitet. Jag har i min studie även visat hur black metal-stilen kan vara ett existentiellt ställningstagande mot kommersialism och mainstreamkultur..

The aim for this essay is to identify and distinguish the metal casting of Uppåkra during late Iron Age by examine related material that primarily consist of finds made with a metal detector. I intend to, by analysing maps, concentrations in the detector material and probable constructions within the settlement, find patterns that can indicate a metal casting activity. The results of the essay show that a number of concentrations can be seen and that they both indicate metalworking activities and to some degree a structural specialization in the settlement. The exclusive artefacts also indicate that Uppåkra was a settlement with over-regional functions when it comes to traditions dealing with metal casting..

Bildsemiotik, semiotik, Metal, musikvideo, referenstolkning, subkultur, hårdrock.

Kristen metal? Kan man verkligen kalla något kristen metal?Heavy metal är ju en rebellisk reaktion mot en samhällsstruktur av människor som inte känner sig hemma där. Och kristendomen är ju en religiös rörelse som står för ordning, reda, renhet och kärlek.Eller?Syftet med denna studie är har varit att studera likheter och skillnader i låtstruktur, dynamik och klangfärg mellan kristna och sekulära metalband och se om de används på samma sätt i förhållande till texten.Jag har gjort en komparativ analys av låtar av kristna och sekulära metalband och tittat på möjliga likheter och skillnader. Detta innefattar även en konstnärlig del där jag, i relation till det analyserade materialet, skrivit två låtar själv och dokumenterat dessa i klingande form.Som material till denna studie har jag använt mig av vetenskapliga artiklar, låtmaterial samt intervjuat pastor Bob Beeman från Nashville, som är en av pionjärerna bakom kristen metal..

A change towards using more biofuels than fossil fuels is taking place in Sweden, and in many other parts of the world. This makes the use of fuel pellets increasingly popular, causing a greater demand for sawmill sawdust products. There is a trend towards the use of multiple types of shredders, instead of a single type in each sawmill. The purpose of the study was to characterize the different flows of saw particles that can be found at Sävar såg when cutting thick or thin wood with different cutting techniques. The saw particles size, shape, moisture content and heat value were analysed by the cutting stations: first cutting fast and slow, second cutting fast and slow, grading fast and slow and planning.

Fortifikationsverket which is the landlord for the Swedish national defence has a great problem in their forestry due to the relatively large amount of metal objects in their timber. These metal objects cause different types of economical losses in the timber refinement chain. To enable out sorting of logs containing metal objects already in the harvesting phase, Fortifikationsverket is interested of the possibility to utilize some type of metal detector in a harvesting head for that purpose.The goal of this study was to, with help of a case study, enlighten the problem that metal objects in timber cause for Fortifikationsverket and their customers of timber and to investigate conditions of to mount and utilize some kind of metal detector in a harvesting head at present.The saw timber deliveries by Fortifikationsverket during the time period 2003-2005 was used as a reference volume for calculations of economical losses. In this case study was included two sawmills where timber from Fortifikationsverket were delivered to for further refinement. Factors investigated were the type of damage metal objects caused in these two sawmills and the economical signification of these damages.

This study was conducted to test the hypotheses that a forest managed by selective cutting can store more carbon than a forest managed by clearcutting. The study was carried out as a meta-analysis. The data that was found was analyzed by performing t-tests on the proportional effect that the two silvicultural methods had on the driving factors of CO2-efflux and carbon stores in coniferous boreal forest. In all areas tested, an effect in favor of selective cutting was found, but not all of them significant however. The soil respiration following selective cutting was significantly lower than that of clearcutting, and the primary production of a clearcut area cannot according to reason exceed that of an area post-selective cutting.

The study is made on behalf of SCA Skog Jämtlands förvaltning which is one of five administration units that SCA Skog consists of. The purpose of the study is to investigate which reduced expenses there are according to spatial concentration of cutting areas. By increasing the spatial concentration of cutting areas it will reduce the need of movements by trailer, also reduce the number of roads that you use during the activities. To be able to perform the study, access to a annual cuttings in nine years have been made available. From this volume new annual cuttings has been created but more concentrated. The two different results have been compared and the results show that concentration of cutting areas generates reduced need for trailer transports and less km road that has to be maintained. But then, if it´s practical viable can be discussed.