This is a case study of the planning and building of a new IT education facility when thedepartment of Media Technologymoved its operation to Flemingsberg and the main campus, due tothe termination of Campus Haninge at Södertörn University, Stockholm, Sweden. The study isbased on a case study an on administrative material from the process such as emailscorrespondences, policy documents, contact reports etc. The material is analysed using qualitativecontent analysis and the different observations done are distilled into four recommendations,aimed at being able to contribute to a improved process in similar future situations, whereverneeded..

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

Abstract:This thesis work has been conducted at the Real Estate Department in Halmstad.The department consists of a construction/project management-unit and an operation/management-unit.Like many other towns in Sweden, Halmstad has had a long lasting problem with indoor environment. Not at least at their preschools.Today they are constructing from current building regulations. They have learned from negative experiences which have occurred in the indoor environment in older buildings.Focus is now on healthy materials, like low emission value, energy efficiency and optimization of the building, but still with soft parameters such as cleaning, interior and choice of materials.The fixtures is provides by the real estate department and the furnishings are provides by the children and youth administration. Together they are trying to provide a great indoor environment.I have, together with the real estate department and the children and youth administration of Halmstad, investigated how to provide a good indoor environment in the preschools with small funds.In my thesis there is one theoretical part with a questionnaire survey of how the preschool staff is experiencing their indoor environment to determine where the problems often start. And a practical part with measurements to try and come down to a result that analysis the cause of the problems and also to make sure that the ventilation systems are fulfilling projected values.The measurements and the questionnaire surveys was made at Lokes preschool in Frösakull, Askens preschool in Oskarström and Gullbrandstorps preschool.There were some differences between the staff-responses at the three different preschools.At Askens preschool they feel that the premises are cleaned poorly.At Gullbrandstorps preschool they feel that the indoor-air is bad because they can´t open the windows.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

The purpose of this thesis is to inquire how a small town can be affected by some planned changes in the physical structure of the town, and how its inhabitants can benefit from those major changes. The town in question is Ulricehamn, and of the four projects considered, two concerns infrastructure. A new railway and a new locality for the major road, today passing through Ulricehamn. The other two projects are run by the local authorities, that is the planning of a modern town park by the lake, and a new public building for cultural purposes. There are no guarantees that any of the four projects will ever be realized, but in the process with this work, they have been considered as already a fact.

This essay focuses upon the Kivik monument and its conservation difficulties, since its discovery at 1748 until modern time. The Kivik monument is found in southeast of Scania, and dated within the Bronze Age period. The perspective of the conservation on the monument has merely been on the monuments inner cist of stone and the rock carvings on the cist-slabs. When the monument was first archaeological examined at 1931, its sizeable cairn (75 m in diameter) had almost vanished and the cist was sheltered by a casing of concrete and metal roof. Between 1932 and 1933 the monument has undergone a large-scale restoration, and this criticized restoration resulted in a low antiquarian value with the responsible authority.

This is a dissertation for a Bachelor Degree Project at the University of Skövde. The project is carried out in cooperation with the company Kinnarps AB.The objective of this project was to develop a new chair for café and lunch rooms, which should satisfy the markets expectations and demands and match Kinnarps AB?s assortment today. The project has contained everything from identification of user and customer needs and requirements to evaluation and building of a prototype.The result is a chair with a frame of tubular steel and there is nothing like it in Kinnarps AB?s assortment today.

Several cities have implemented various projects to improve traffic safety in city centers.During 1970s and 1980s the city centers changed as the suburbs grew and large shopping centers were located outside the center. At the same time, several projects were initiated with construction of pedestrian streets and restriction of traffic in the center. In year 1994,shared-used areas were introduced in Sweden and these areas are often used in center environments.In Sweden, municipalities are responsible for integrating security in public places and in comprehensive plans and detailed development plans. The National Board of Housing,Building and Planning is the authority for administrating planning issues and develop general guidance about planning. Traffic is one of their key issues, although today there are no concrete guidelines from the National Board of Housing, Building and Planningfor the design of traffic safety in city centers.Traffic safety in city centers affects many people because the city center is a public place.It is therefore important that there are current guidelines available that are helpful for changes and improvements in traffic safety in the city center.The purpose of this report is to formulate guidelines for planning city centers from a traffic safety perspective.

Bacillus anthracis is the causative agent of anthrax, a serious and globally distributed zoonosis affecting a wide range of wild and domestic animals, invariably also humans. However, although known to humans since biblical times, much remains to be elucidated concerning the ecology and transmission of this bacterium. Of particular interest is the Bacillus anthracis spore, the uptake of which is the predominant way to contract anthrax and which is legendary for its resilience in the environment and thus crucial for persistence and spread of the disease. Hence, the aim of this study is to review the natural transmission of Bacillus anthracis and investigate potential means by which soil persisting Bacillus anthracis spores reach concentrations sufficient to infect susceptible hosts. When reviewing the literature, three different theories can be distinguished. Firstly, ?the incubator area? hypothesis suggests that favourable soil factors, possibly in association with amoebas, may constitute an environment supporting repeated spore-bacterium-spore cycling, thus increasing the local amount of spores.

Idag är Suzuki Garphyttan AB (SG) en del av Suzuki Metal Industry Group vilket är ett Japanskt företag. SG är världsledande inom tillverkningen av avancerad fjädertråd som används till olika fordonsapplikationer. Kärnverksamheten hos SG är tillverkning och försäljning av ventilfjädertråd, plattråd och profiltråd, oljehärdad tråd, rostfri fjädertråd samt fjädrar. SG har tillverkning av bland annat ventilfjädrar till lastbilar i Fjäderfabriken som är beläget inom fabriksområdet i Garphyttan. Fjäderfabriken genomför ett förbättringsarbete med avsikt att lägga om sin funktionella produktion till linjeproduktion.

Siemens Building Technologies (SBT) tillhandahåller och underhåller byggnadsautomationslösningar. För att serva deras underhållsorganisation har de 51 stycken servicelager runt om i landet. På dessa lager lagerhålls artiklar som behövs för att uppfylla deras serviceavtal gentemot kund. Företaget anser att det finns för mycket kapital bundet i dessa lager och att deras omsättningshastigheter är för låga. Examensarbetets syfte är att utvärdera SBT:s lagerstruktur och utarbeta ett arbetssätt som företaget kan använda vid bestämning av sortiment och lagernivåer för att sänka deras totala lagerkostnad.

The following essay is a study of the theatre-play Min Arm, a translation and performance by Per Lasson for Fria Teatern in Stockholm 2009-2010. Actor, director and playwright Tim Crouch wrote the original script My Arm in English in 2003.With basis in intermedial theory, as defined by Jörgen Bruhn, as well as Hans-Thies Lehmann?s theory on post-dramatic theatre this study investigates the meaning-building processes in Min Arm as a theatrical performance. Concepts of the difference between stage play and performance text are borrowed from and inspired mainly by Eli Rozik?s Generating Theatre Meaning.

This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

Detta examensarbete har undersökt vilka möjligheter som skapas genom att använda BuildingInformation Modelling (BIM) för Livscykelkostnadsanalyser (LCCA). Arbetet beskriver förstLCCA och sedan hur BIM samt öppna standardiserade dataformat kan användas för LCCAoch för kvalitetssäkring av data. Till sist visas hur ett verktyg som räknar ut LCC direkt frånen byggnadsmodell kan utformas. Genom att kunna synliggöra konsekvenserna av olikalösningsalternativ och göra kvalitativa LCCA erhålls genomtänkta lösningar och medvetenhetom de framtida förvaltningskostnaderna. För en byggherre som också ansvarar för driften kandessa alternativsvärderingar och analyser leda till betydligt lägre förvaltningskostnader.

Risk assessment is made to determine risks with contaminated areas and to determine which treatment the area requires. In Sweden, risk assessment is divided into three levels: risk analysis, facilitated risk assessment and detailed risk assessment. In detailed risk assessment site-specific guideline values are developed to compare with values of contaminants that are measured in the area.Site-specific guideline values vary with geological and hydrogeological parameters. The purpose of this report is to examine which of these parameters that affect the guideline values. The examination was done using a calculating program for consideration from the Swedish Environmental Protection Agency from the year of 1997.