AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

This report's aim is that by field measurements determine the function of Aprobo soundproofing material dB2 for reducing impact sounds, the measurements is done in ?the school for fine art? in Umeå also known as ?konstnärligt campus building nine?. The construction technique is used in areas sensitive to impact sound between different floors in the building. The measurement?s is also to do a function control of the buildings sound quality compared to Swedish and European standard when it comes to air sound, impact sound and reverberation time .

The aim of this study is to describe and analyse the creation and the design of a new public library. In order to concretize this, the study sets out from two examples, the public libraries in Simrishamn and Landskrona. The material used to attain the purpose of the study consists partly of interviews, partly of literature on the subject. To be able to put these two libraries in their historical context, the essay also provides a short overview of the development of public library buildings in Sweden during the 20th century. Another aspect that is discussed is the actual procedure of planning a public library from scratch.

An emerging trend within the construction industry is the expectation of the customer to experience and sense the product, maybe even in a customized manner. The latter trend would extend the necessity of incorporating not only function and aesthetics, but also perception and sensation. To meet this trend while at the same time improve the productivity the use of information technology such as BIM and technical platforms has increased in construction projects. Nevertheless, in spite of large investments, the construction industry has not managed to increase the effectiveness and productivity as much as other industries. Evident is that successful use of information technology depend on the integration and collaboration of various experts in a continuous and dynamic process.

The swedish national board of housing, Building and Planning,recommends that all stakeholders in the construction industryperform a moisture control design to make sure that the buildingachieves good moisture resistance. Since June 1, 2006 there are nospecific requirements or quantitative values for air leakage.Although the swedish national board of housing does presentrequirement that the building envelope must be sealed so that theclient?s requirements for specific energy consumption and installedelectric power for heating purposes are met. Despite this, studiesfrom SP shows that few buildings meet the client?s requirements inspecific energy, which increases the risk of occurrence ofcondensation-related moisture damage.This study aims to evaluate curtain walls connections from airsecurity and moisture safety.

In many developing countries, among them Vietnam, contamination of agricultural land is a major issue that has public health implications. A fast growing population, rapid urbanization and industrialization have led to air and water emissions of potentially toxic elements (PTEs), such as cadmium (Cd). Earlier studies have shown that individuals with low iron (Fe) and zinc (Zn) status absorb larger quantities of Cd than those of adequate nutritional status. The purpose of this study was to investigate and compare the Fe and Zn intake from the foods consumed by women (15-45 years) in selected households in two agricultural villag-es in the Red River delta in Vietnam. In one of the villages the residents were involved in metal (mainly Fe) recycling activity, whereas in the other village the residents had agricul-tural production as main source of income. Interviews, followed by food intake calcula-tions, were performed.

This study concerns a selection of prehistoric metal objects of animalistic design, published at the internet site of the Swedish Statens Historiska Museum. It seeks to give an impression of the design elements used, and to find likely models for the motifs among live animals. The method used is a qualitative hermenuetic comparative study of objects, where the distinct significant design elements are being identified and interpretated. Several significant design elements are identified, and some are interpretated as representing certain animals. The amalgamation of differentiating design elements in some objects however, leads to interpretations of compound animal motifs, where some motifs are considered ambiguous and some are rendered uninterpretated.

As a result of increased energy prices more and more energy-efficient homes are coveted. An energy-efficient alternative is passive houses, which is characterized by an extremely well insulated building envelope that recovers the heat without the use of radiators or under floor heating. But a passive house requires a higher investment cost than a conventional building project, since it will require more construction materials, training of construction workers, greater land area, and long construction period. But the lower operating cost expects to pay back the higher cost of investment. We therefore question how profitable a passive house is in relation to houses built according to modern conventional building techniques.The aim of our study is to investigate the viability of passive houses compared to convent­ional houses.

Den här uppsatsen tar avstamp i en personlig erfarenhet av när representationen på sociala medierorsakat konsekvenser i den fysiska världen. Uppsatsen undersöker, genom en autoetnografiskmetod, processer för normerande tillhörighet inom speciella diskurser. I texten användsmusikgenren Black Metal som exempel för att visa hur normer styr och kontrollerar socialthandlingsutrymme för kvinnor. Begrepp som används för att beskriva dessa processer kommer frånErving Goffman och har kallats för det dramaturgiska perspektivet. Begreppen används vidare iarbetet som verktyg i det gestaltande arbetet där normer för subjektspositioner undersöks iiscensatta fotografier..

A place that mixes different kind of uses of space. Two main theatres inside and a lot of smaller rooms for different venues. A methaphor the tide have strong impact of shaping the building.

The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.

The purpose of this essay is to examine if the municipality has a real freedom of action to control the use of the land and the shaping of the buildings in a large and prestigious building project.In Karlstad there is now (2006) a large building project in form of a shopping mall. This project is in its final stage of completion and offers me a suitable case to examine. To undertake the purpose of the essay, the following research question is formulated:Do the municipality have a real freedom of action to control the use of the land and the shaping of the buildings in a large and prestigious building project as the Mitt I City project?In an attempt to examine the project and the planning process, three themes are applied. The first theme derives from the hypothesis that the part that initiate the process gets the upper hand as future discussions are taking place in relation to the original ideas.

This essay is written about how the physical environment affects teachers? own learning. The purpose is to see how the teachers? work is affected by various factors, such as the uses and placement of the teachers? offices, common room, or any other places where a meeting may occur. The survey was conducted using both interviews and observations of the teacher?s office.

Everyone has to take a greater responsibility in energy issues, both individuals and companies. There have been some major developments in the construction industry but there is still a lot to be done. This diploma work thesis presents different methods of making existing construction shed establishments to use less energy. What is possible to do and how much energy is there to be saved? A shed establishment consisting of 8 shed units were studied in this project and the building simulation tool VIP-Energy was used to simulate different types of material in the sheds. An infrared camera was used to locate thermal bridges. There are several factors that can be improved to make a construction shed establishment to use less energy.

The municipality of Enköping is presently working out a new layout plan for the town of Enköping and new residences are planned in the harbour area. Because of these plans, the municipal energy company ENA Energi may have to move its location from the harbour to another part of the city.The aim of this degree project is to investigate the possibility of building a new CHP plant in another area of Enköping. The future demand on district heating and infrastructure at the new location have been projected. A new CHP plant has been dimensioned and economic analyses concerning the project have been made.Results show that the future demand of district heating in Enköping will differ a little from the present needs. In 2030, the district heating production is expected to be c.