Promoters are genetic elements that facilitate the transcription of a gene and they have been found in front of non-coding RNA (ncRNA) genes in different organ-isms, e.g. the model plant Arabidopsis thaliana. A similar element, DUSE, has been found in front of ncRNAs in the social amoeba Dictyostelium discoideum and a part of this project has been to analyze the function of this putative promoter element through cloning and expression studies. A construct to analyze the func-tion of DUSE was successfully designed and introduced into D. discoideum but full expression studies were not finished because of shortage of time.

Earlier investigations showed that damages on timber from feeding rolls could be within the lower classes of damage according to VMRs classes. Knowledge about differences in productivity between kind types and aggressive types of feeding rolls is necessary because it should influence the question about damages on timber caused by different feeding rolls. In this study the production and timber damage in a harvesting head were evaluated at three levels of pressure (8, 10 and 14 MPa) on the feeding rolls, and with three different types of rolls. One type, the rubber cushioned steel plate roller had 10 mm studs and rubber damping, one ?middle? type made of solid steel with 14 mm studs, and one aggressive type, also made of solid steel with 18 mm studs.

Compressed air is an energy source that is widely used in today's trucks and buses.Compressor located next to the engine supplies the pneumatic system with the compressed air and is lubricated with the engine oil. Some of the oil follows the air flow in both liquid and solid phase. The solid phase, namely the carbon particles are created due to the high temperature in the compression chamber.Oil- and particles carryover softens and destroys the rubber material in the air valves and disturbs the mechanical function of various components in the pneumatic system. In order to reduce oil- and particles carryover is an Air Processing System (APS) set downstream the compressor.No method for establishment of oil- and particles carryover from the compressor exists at the moment. Therefore the filtration efficiency of APS is currently unknown.

The importance of micropropagation has increased to provide the increasing fields with true to type and healthy plants. Traditional plants are growing on solid agar-based medium but lately liquid medium has become a new opportunity. This study has focused on a new bioreactor, developed on large scale micropropagation. Potato (Solanum tuberosum L. ?Semlo?), raspberry (Rubus idaeus L.

Promoters are genetic elements that facilitate the transcription of a gene and they have been found in front of non-coding RNA (ncRNA) genes in different organ-isms, e.g. the model plant Arabidopsis thaliana. A similar element, DUSE, has been found in front of ncRNAs in the social amoeba Dictyostelium discoideum and a part of this project has been to analyze the function of this putative promoter element through cloning and expression studies. A construct to analyze the func-tion of DUSE was successfully designed and introduced into D. discoideum but full expression studies were not finished because of shortage of time.

Promoters are genetic elements that facilitate the transcription of a gene and they have been found in front of non-coding RNA (ncRNA) genes in different organ-isms, e.g. the model plant Arabidopsis thaliana. A similar element, DUSE, has been found in front of ncRNAs in the social amoeba Dictyostelium discoideum and a part of this project has been to analyze the function of this putative promoter element through cloning and expression studies. A construct to analyze the func-tion of DUSE was successfully designed and introduced into D. discoideum but full expression studies were not finished because of shortage of time.

The views on and the knowledge of the introduction of iron to Scandinavia have change by the history of archaeology. The results and discussions are put in the context of time and how that time is reflected in their work and texts. This limits that scholars put up to orientate themselves conceal the complex reality. The limits are changing all the time and is dependent of time and person..

Solid waste management is one of the most essential functions in a country to achieve asustainable development. In India, it has been one of the least prioritized functions during thelast decades. The most common ways to treat waste in India today are open dumping anduncontrolled burning. These methods are causing severe environmental pollution and healthproblems. India is one of the world?s largest emitter of methane gas from waste disposal.Since methane is a strong greenhouse gas, even small emissions have large impact on theclimate.

This bachelor thesis project has been executed at Outotec Sweden AB in Skellefteå. Outotecs main business focus is selling mineral and metal processing technologies. A rest product from the metal process is particle-polluted gas and cyclone designs are today the most commonly used abatement device for particle control. A cyclone provides a simple design with high efficiency particle percolation by using air streams.The purpose of this work is to reduce the time it takes create new cyclone designs in Outotecs projects. An extensive construction work is needed for every new cyclone order due to new designs.

Many companies have historically forced their interests through without any thoughts about the future needs of the humans and the society. In the last few years voices have been raised for a change, companies need to take their responsibility regarding sustainable development.The purpose of the report is to describe and explain possible relations between sustainabil-ity performance of companies and profitability, valuation, industry and size respectively.To be able to judge the sustainability performance of the companies Folksam (2006a) have been used. This is a solid investigation of the companies listed on the A- and O-lists of the Stockholm Stock Exchange by the end of 2005. The sustainability marks have been com-pared with the chosen key values for each hypothesis respectively. With this quantitative data as foundation, a quantitative approach and a deductive method have been used.In the first area of the investigation, profitability, the authors found correlation for the main hypothesis between sustainability performance and ?Return on Total Assets? through a statistical test.

Scandinavian Biogas is involved in the planning of a combined ethanol and biogas factory in Karlskoga, Sweden. Besides biogas and ethanol large amounts of digester residues will be produced, about 450 000 liquid tonnes residue (~7,3 % Dry Substance( DS)). The objective of this thesis was to investigate possible uses of the residue from the biogas production process ScandgasEthanol developed by Scandinavian Biogas, and to derive a methodological approach how to evaluate and compare handling systems. Three systems where proposed and compared in this thesis; spreading of the untreated residue as fertilizer (system 1), dewatering to a higher DS content to reduce transportation before spreading as fertilizer (system 2) and production of a solid fuel by dewatering and drying the residue (system 3). The general conditions for the proposed systems were investigated in terms of practical viability, economical aspects, environmental impact and energy inputs/outputs.

In this study potential health risks for employees in connection with handling of bottom ash and bottom ash water at a Municipal Waste Incineration (MWI) plant have been investigated. Air surrounding the bottom ash and the bottom ash water has been examined. MWI is one of the primary ways to manage solid household waste, and bottom ash is the main solid residue produced by the incineration process. Bottom ash constitutes about 15-20% of the original waste. The bottom ash is extinguished in a water bath (bottom ash water).The study was carried out in a MWI plant in Karlstad, Sweden.

Chlorinated aliphatic hydrocarbons (CAH´s) were used widely within dry cleaning facilities and for metal degreasing until their toxicity was discovered. PCE is still used as dry cleaning liquid. Today CAH´s are found in soil environment at places where they have been used in the past. The CAH-concentration in trees growing on contaminated land has quite recently received attention as a cheap and effective way of assessing the extent of a CAH-contamination. The method has however, not been put into use in Sweden.The aim of the study has been to investigate whether the CAH-concentration in tree cores could be used to delineate the spread of CAH in a soil environment under Swedish conditions in different seasons.

During an excavation at Old Uppsala 571 raw garnets was found. In comparison with similar fragments from other sites in Sweden my aim was to prove a completely domestic production of garnets for cloisonné work. I have chosen to look at the archaeological sites of Old Uppsala, Valsta, Slöinge and Paviken and more closely at the material from Old Uppsala and Valsta. My theoretical framework has been to look at the garnets own agency in the contemporary society.Garnet cloisonné was a popular jewellery form during the Merovingian period on the continent although it came to an end in the early 7th century. It was during this time in Scandinavia a new sort of garnet, technique and paste was introduced and the garnet cloisonné was profoundly used for the gear of the elite and ritual objects.

When models are used to describe physical phenomenon during development or modification of a technical system, it is often possible to reduce both the time needed and the overall development cost. With the use of models it is also possible to investigate the potential of the selected solution, without the need for any expensive details and testrigs. In many cases it is also not possible to test all the aspects regarding the functionality that are desired from the system, without using the complete and final product.In this case a model based approach has been used to optimize the different parameters in the new snubbing mechanism for the Nose Landing Gear Retract Actuator on the JAS39 Gripen.During the simulations, upper and lower boundaries were calculated for the length of the spring and the diameter for the restrictor. The governing constraints were given by the requirements for the retraction time during cold conditions and that the amplitude of the alternating loads in the uplock mechanism were brought to an acceptable level.The most promising results from the simulations were then used in a limited number of trials in the hydraulic rig to verify that the configurations comply with the requirements.The final parameters for the snubbing mechanism were chosen to 35±1mm for the spring and 0.4-0.5 mm diameter for the restrictor..