Sök:

Sökresultat:

1335 Uppsatser om Melt Flow Ratio - Sida 28 av 89

Inverkan av tvång i gjutfogar och i betongkonstruktioner på
elastiskt underlag: Influence of Restraint in Casting Joints
and in Concrete Structures on Resilient Foundation

In this report, the risk of cracking in joints and/in adjacent concrete is estimated by checking shear forces in joints and the ratio between the actual maximum principal stress ant the actual strength of the concrete. The shear force has been estimated both by simple methods as well as by two-dimensional calculations. The risk of cracking in the concrete and/or in the joints is estimated with the computer program ConStre. The restraint from a resilient foundation or rock on a young concrete construction is estimated by a simple method that is exemplified. It is shown that the restraint can be neglected in some cases.

Flaskhalshantering genom materialstyrning : En fallstudie på LB-Hus

Title: Bottleneck management through materials administration Course:  4FE05EAuthors:  Mikael Karlsson and Johannes Mueller  Examiner: Helena ForslundKey words:  Bottleneck management, material management, process description, timber, proceduresPurpose:   The objective of this study is divided into three parts, all three parts of the purpose aim for the same goal. Namely, to improve the material management so that this enables the bottleneck in the planing mill to keep a continuous  flow, and thereby minimizing the risk for production stops at LB-Hus.  Part.  1:  Identify  and  analyze the material management  connected to  the planing mill  in order to identify problem areas.Part.2:  Identify  improvement potential  in the material management connected to the planing mill.  Part.3: Suggest improvements in the material management connected to the planing mill. Theoretical framework: Process mapping, inventory accounting, balance safety, inventory availability / service levels, safety stock and reorder point, forecasting and routine descriptions.Empirical foundation:  Interviews carried out at LB-House,  illustrated with the help of process maps and a description of each process.  Conclusions:  To work with  the  suggestions  given  and  to  follow  clear procedures  in  all  processes would  result in  a more  efficient  inventory management,  it would also present  a  solution  to  the problem regarding the planing mill being a bottle neck.Suggestions for further research: Review and map the information flow from demand to production start.

Return Behavior of Initial Public Offerings and Market Efficiency

This paper is an event study on Initial Public Offering?s return behavior after the dot com bubble. Cumulative Abnormal Returns are used to measure the performance against a market index. The results suggest that the market correctly prices IPOs in the long run thus upholding the Market Efficiency hypothesis. Moreover, value weighted CARs show that large IPOs are more likely to outperform smaller IPOs, however in the long run there is an unpredictable pattern.

Enumerating Atlantic salmon smolt production in River Vindelälven based on habitat availability and parr densities : consequences of using different density estimation methods

Habitat mapping was conducted in the main stem of River Vindelälven in the autumn of 2009 along the salmon distribution area. The aim was to estimate the quantity of potential reproduction areas, including spawning and juvenile rearing habitats. The mapping included 61 km of various stream sections along the river length of 269 km. The total area of stream habitats was estimated to 647 ha of which 396 ha (61%) were considered as either potential or optimal juvenile nursery habitats. The area of these two habitat classes were used to estimate the smolt production in the river by using electro fishing densities of juveniles (0+ per 100 m2).

Tillämpning av Toyotas produktionssystem på Electrolux Distriparts AB

Uppgiften som låg till grund för denna uppsats, var att ge förslag på produktivitetshöjande åtgärder på Electrolux Distriparts godsmottagning. Vår avsikt var att tillämpa delar av Toyotas produktionssystem på den befintliga processen. Detta resulterade i en serie förslag som, om de tillämpas, drastiskt kommer höja produktiviteten i den aktuella processen..

Undersökning av modulationsscheman för existerande bredbandsteknologier

In this thesis some different modulation schemes for xDSL-techniques are compared. The investigated techniques are ADSL, G.lite, ADSL2, HDSL, SHDSL and VDSL. The modulation methods used are DMT, CAP and different versions of PAM. Several broadband techniques also use Trellis Coded Modulation (TCM) to increase the coding gain of the transmission. For each one of the different modulation methods the signal-to-noise ratio is calculated for generating a bit error rate probability of 10-7.

Optimering av informationsinsamlingvid prototyptillverkning

This report discusses a method to detect divers in harbour environments usingpassive acoustic detection. The goal was to achieve as high detection as possiblewithout having too high false alarm rate. A short execution time was also desirable.By using the characteristic of an inhalation a band-pass filter was applied to the signalto improve the signal to noise ratio. After the filtering an energy estimation of thesignal was made. This energy estimation was later used in a frequency analysis, whichcould tell us if there were enough energy in the frequencies that correspond to adivers breathing frequency.

En slumpmässig vandring eller genomsnittlig återgång : Råder förutsägbarhet på Stockholmsbörsen?

This study has been conducted in order to determine the existence of predictability for the Stockholm stock exchange. With this purpose the random walk theory has been raised against the theory of mean reversion in order to determine which theory is the most substantial. Data has been collected from Nasdaq OMX Nordic and furtherly been processed using the statistical software EViews. Swedish listed companies? daily share values between 2000-2014 have been analyzed using two tests; an Augmented Dickey Fuller test and a Variance Ratio test.

FÖRBÄTTRAD MONTERING OCH DESIGNAV BAGAGELUCKA

This thesis includes a mechanical engineering design work performed incollaboration between ÅF and Halmstad University. The work is done by FredyOlsson?s methods of Principle- and Primary Construction and David Ullman?stheories of Design for Assembly.The group was commissioned by ÅF to produce a concept to narrow down theassembly time of today?s luggage doors by reducing the numbers of adjustmentoptions. They also wanted it to be easier to mount the assembly by making itpossible to adjust the door in a closed position. Today luggage door takes, with its10 adjustment possibilities, around 4 hours each to assemble and ÅF wanted anassembly time around 10 minutes per door.Initially a preliminary study was made where the group began reviewing today'sconstruction and mounting of rails and doors on buses.

Kemin bakom framtidens avgasrening : En studie av ureasönderfall under kvävgasatmosfär

The purpose of this work was to provide a better understanding of urea?s decomposition and byproduct formation in an SCR system on heavy trucks. In my experimental setup with TGA-DSC-FTIR (a combination of two thermal analysis methods and a method for gas phase detection), an FTIR method for urea in the gas phase was developed for the qualitative and quantitative determination of urea and its decomposition products. Chemicals such as urea, biuret, cyanuric acid and melamine of p.a. quality were used in this method development. Beforehand, there was no FTIR method available to detect these substances; hence, the aim of this work was to develop an FTIR method to understand the degradation chain of urea. The combination of TGA and DSC was used for analysis of different samples, where urea, biuret, cyanuric acid and melamine in varying amounts have been weighted in for various experiments in order to study the temperature at which a phase transition or reaction occurs, i.e.

Famas och Frenchs två faktorer: proxyvariabler för konkursrisk?

The aim of this study is to examine whether the two factors SMB and HML in the Fama-French Three Factor Model proxy for default risk. The study is based on companies noted on the Stockholm Stock Exchange between 2003 and 2008. These companies are used to create the factors SMB and HML, as well as a default risk factor we call RMS. In a first set of regressions, we examine the explanatory power of the original Fama-French model on a set of portfolios consisting of Swedish companies of different size and book-to-market ratio. The default risk factor RMS is then added to the original Fama-French model.

Beräkning av pumpkapacitet samt konstruktion av pumpfundament

Ett undersöknings- och utvecklingsarbete för att lösa ett problem med att dränkbara pumpar i ett vattenavrinningssystem gick sönder med perioder på två år i genomsnitt, utfördes i samarbete med Cementa AB i Skövde. Orsak till pumpars haveri söktes och fanns vara bristande rutiner och kunskap om det underhåll pumparna krävde. För att lösa detta problem utvecklades riktlinjer för nyinköp av torruppställda pumpar för att möjliggöra kontinuerligt underhåll. Då möjligheter för placering av torruppställd pump saknades utvecklades ett pumpfundament för placering av torruppställd pump. Krav för utvecklingsarbetet togs fram i samarbete med Cementas underhållsavdelning och teoretisk dimensionering av dränkbara länspumpars dåvarande volymflödeskapacitet utfördes.

Brunnsviken : Utvärdering av åtgärder för förbättrad vattenkvalitet

Periods of hypoxia are a recurring issue in Brunnsviken. Main factors that trigger hypoxia in Brunnsviken are eutrophication  due to anthropogenic emission of nutrients, stratification in the water column due to salinity and temperature differences  that prevents mixing and a sill inlet that prevents water exchange. As an attempt to improve the oxygen levels, bottom water is pumped from Brunnsviken causing aerated surface water to flow back into the basin.  The objective of this Master?s thesis was to study the change in dissolved oxygen levels due to pumping.

Passive acoustic diver detection

This report discusses a method to detect divers in harbour environments usingpassive acoustic detection. The goal was to achieve as high detection as possiblewithout having too high false alarm rate. A short execution time was also desirable.By using the characteristic of an inhalation a band-pass filter was applied to the signalto improve the signal to noise ratio. After the filtering an energy estimation of thesignal was made. This energy estimation was later used in a frequency analysis, whichcould tell us if there were enough energy in the frequencies that correspond to adivers breathing frequency.

Implied Dividends and Equity Returns

This paper studies the option market?s implied dividend as a predictor of future equity market returns. We introduce this variable in the simple total return framework and discuss some complications of using it as a proxy for the expected dividend. We construct some regressions using the price-dividend ratio and the implied dividend growth, and test them on six years worth of data on the EURO STOXX 50-index. The main result is that implied dividend growth exhibits some forecastability over two-year horizons, but that the dataset is too short to draw any definitive conclusions about long-horizon forecastability.

<- Föregående sida 28 Nästa sida ->