The purpose of this thesis is to inquire how a small town can be affected by some planned changes in the physical structure of the town, and how its inhabitants can benefit from those major changes. The town in question is Ulricehamn, and of the four projects considered, two concerns infrastructure. A new railway and a new locality for the major road, today passing through Ulricehamn. The other two projects are run by the local authorities, that is the planning of a modern town park by the lake, and a new public building for cultural purposes. There are no guarantees that any of the four projects will ever be realized, but in the process with this work, they have been considered as already a fact.

This is a dissertation for a Bachelor Degree Project at the University of Skövde. The project is carried out in cooperation with the company Kinnarps AB.The objective of this project was to develop a new chair for café and lunch rooms, which should satisfy the markets expectations and demands and match Kinnarps AB?s assortment today. The project has contained everything from identification of user and customer needs and requirements to evaluation and building of a prototype.The result is a chair with a frame of tubular steel and there is nothing like it in Kinnarps AB?s assortment today.

Several cities have implemented various projects to improve traffic safety in city centers.During 1970s and 1980s the city centers changed as the suburbs grew and large shopping centers were located outside the center. At the same time, several projects were initiated with construction of pedestrian streets and restriction of traffic in the center. In year 1994,shared-used areas were introduced in Sweden and these areas are often used in center environments.In Sweden, municipalities are responsible for integrating security in public places and in comprehensive plans and detailed development plans. The National Board of Housing,Building and Planning is the authority for administrating planning issues and develop general guidance about planning. Traffic is one of their key issues, although today there are no concrete guidelines from the National Board of Housing, Building and Planningfor the design of traffic safety in city centers.Traffic safety in city centers affects many people because the city center is a public place.It is therefore important that there are current guidelines available that are helpful for changes and improvements in traffic safety in the city center.The purpose of this report is to formulate guidelines for planning city centers from a traffic safety perspective.

Siemens Building Technologies (SBT) tillhandahåller och underhåller byggnadsautomationslösningar. För att serva deras underhållsorganisation har de 51 stycken servicelager runt om i landet. På dessa lager lagerhålls artiklar som behövs för att uppfylla deras serviceavtal gentemot kund. Företaget anser att det finns för mycket kapital bundet i dessa lager och att deras omsättningshastigheter är för låga. Examensarbetets syfte är att utvärdera SBT:s lagerstruktur och utarbeta ett arbetssätt som företaget kan använda vid bestämning av sortiment och lagernivåer för att sänka deras totala lagerkostnad.

The connection between rune stones and churches is a known phenomenon. Unfortunately, very little is known about the previous function of the church sites, and consequently very little is known about what the connection between rune stones and churches means. The purpose of this study is to examine the rune stones connected to churches in the administrative province of Jönköping, in an effort to ascertain their purpose, symbolism and function. The aim is to find out if the rune stones connected to churches were primarily or secondarily placed on the site where the church was later built, and why some rune stones were built into the churches. Further, the inscriptions and iconography of rune stones have been analysed, and also their relation to their immediate surroundings.

During 40 years of industrial production, from the end of the 1890?s until the end of 1930?s, coal and wood distillation products were manufactured in AB Carbo?s tar factory along the River Gimån in Grötingen, in the county of Jämtland, Sweden. In accordance with the Swedish Environmental Protection Agency?s Methods for Inventories of contaminated sites, MIFO, the site in Grötingen has been identified as a potentially contaminated site. In order to determine whether toxic substances pose a threat to human health and ecological systems in the area, there was a need to investigate the presence of contaminants, their levels and potential for migration.

The author of this report has created a Web-based invoice system and CRM at therequest of the company Webhouse.se. The purpose of the System is to makeeveryday tasks in the company easier. The system also needed to prevent mistakesand errors by managing orders and invoices.The system has been created with the company?s requests in focus. During thedevelopment of the system information security and interaction design have beenimportant aspects that have been taken into consideration.The system has been created using techniques such as PHP and MYSQL.

Magnetic resonance imaging (MRI) has the potential to be used for the diagnosis and study of osteoarthrosis in the equine tarsal region. In the development of new diagnostic MRI techniques cadaver specimens are often used. To allow the use of cadaver legs for these types of studies it is important to know the effect of time after death on the MRI image. Since the relaxation times are temperature dependent, it is interesting to examine whether the time after death and the temperature of the cadaver may play a role in the image appearance and quality. The radio pulse sequences that show the different types of tissues are also important to know when pathological evaluation with MRI is used.

If not purified leachate from landfills would cause damages on the environment. At most landfills in Sweden local treatment of leachate is achieved, at the rest the leachate is transported to sewertreatment. While no comprehensive legal provisions for discharge exist in Sweden there is a difference in discharges between the installations for landfill. If no comprehensive legal provisions is produced guidance must improve.Treatment of leachate and self monitoring system at fifteen installations in Sweden has been studied and compared. A study of literature about different treatment solutions has also been performed.

Nowadays naval units are participating in international missions, where new and in many cases tougher conditions will affect their propulsion. This essay deals with some of the now developed nanostructure coatings and gives a presentation of how the coatings could function on some exposed parts of the naval powertrain. The essay investigates the possibility that the coatings can be used as a protective layer that will reduce or prevent wear on selected parts of the naval powertrains. As a basis for the essay, nanotechnology is described, as well as different reasons that wear occurs and application techniques for coatings The conclusion is that nanostructured coatings can be applied and provide a much better result on hardness and wear resistance as of naval powertrains compared to micro-structural coatings, both for manufacturing and renovation. The essay presents a few examples of the military utility of the nanostructure coatings as well as suggestions for further research..

AbstractThis report is about the creation of a test system for development of a control system for a off the shelf RC-helicopter, which can be bought for about two thousand SEK. The test system consists of both electronics for controlling the helicopter and mechanical constrainer. The constrainer is used for mounting the helicopter so that it won´t crash.A circuit board including processor and sensors was manufactured. This was used for doing test of the different control algorithms. In this way were we able to analyze the quality of the sensors chosen, and what other sensors that could contribute to the control of the system.Basic helicopter control have been studied and presented in the report.

The following essay is a study of the theatre-play Min Arm, a translation and performance by Per Lasson for Fria Teatern in Stockholm 2009-2010. Actor, director and playwright Tim Crouch wrote the original script My Arm in English in 2003.With basis in intermedial theory, as defined by Jörgen Bruhn, as well as Hans-Thies Lehmann?s theory on post-dramatic theatre this study investigates the meaning-building processes in Min Arm as a theatrical performance. Concepts of the difference between stage play and performance text are borrowed from and inspired mainly by Eli Rozik?s Generating Theatre Meaning.

This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

When searching for better and more practical interfaces between users and their computers, additional or alternative modes of communication between the two parties would be of great use. This thesis handles the possibilities of using eye and head movements as well as voice input as these alternative modes of communication. One part of this project is devoted to find possible interaction techniques when navigating in a computer interface with movements of the eye or the head. The result of this part is four different controls of an interface, adapted to suit this kind of navigation, combined together in a demo application. Another part of the project is devoted to the development of an application, with voice control as primary input method.

Detta examensarbete har undersökt vilka möjligheter som skapas genom att använda BuildingInformation Modelling (BIM) för Livscykelkostnadsanalyser (LCCA). Arbetet beskriver förstLCCA och sedan hur BIM samt öppna standardiserade dataformat kan användas för LCCAoch för kvalitetssäkring av data. Till sist visas hur ett verktyg som räknar ut LCC direkt frånen byggnadsmodell kan utformas. Genom att kunna synliggöra konsekvenserna av olikalösningsalternativ och göra kvalitativa LCCA erhålls genomtänkta lösningar och medvetenhetom de framtida förvaltningskostnaderna. För en byggherre som också ansvarar för driften kandessa alternativsvärderingar och analyser leda till betydligt lägre förvaltningskostnader.