The aims of the practical work carried out for this thesis were to redesign a clinical decision support system for thoracic surgeons, called AssistMe, and to evaluate the concept behind this system. The main objective of the thesis is to give an account of the considerations that were found to be of key importance for designing a clinical decision support system for thoracic surgery. Another aim was to let future users test the system after it had been redesigned and evaluate the concept behind it. The thesis also investigates users? experience of the system and their views on whether it would be applicable in their daily work practice.

Introduction In order to foster innovation of medical devices within the healthcare sector, a collaboration project, PUSH, has been initiated including the hospitals managed by the Stockholm County Council. The collaboration aims to capture ideas from employees and turn them into so called ?high-practice? products as well as facilitate the possibilities for medical device companies to try out their products in the settings of healthcare. Collaborations for innovation, comparable to the PUSH project, can be found in both Swedish and foreign regions, but some of them fail to survive due to obstacles affecting the progress of each collaboration. Avoiding the same destiny will be a challenge to the PUSH project.Purpose The purpose is to search for factors affecting organizational collaboration concerning innovation systems for medical device development.

The aim of this thesis is to investigate the opportunities of classification of web pages. Two classification systems are compared; a library classification system traditional and a system that is developed for use on the web new. UDC is chosen to represent the traditional systems, and Yahoo! represents a so called new system. UDC is used by NISS Directory of networked resources, which is a directory that uses the system for organisation of electronic resources. Both systems are analysed from two different perspectives, a multidisciplinary and a timeperspective.

Physiotherapists treat people with different views of the world and medical beliefs, which require a good understanding of cultural differences. One way to achieve cultural understanding is through self-reflection in a new context. During five weeks the authors, two physiotherapy students, completed a clinical practice at the rehabilitation center Pina Palmera, Zipolite, Oaxaca, Mexico. At the beginning of the period a critical incident was chosen, when the head physiotherapist for the ward Cuidados Especiales intended to sell jewellery to the authors during a treatment of a patient. The authors have by using the reflection framework "Framework to guide reflective process", and Interpretive Phenomenological Analysis (IPA) for analysis, discussed different ways of communication, adherence, education, and self-reflection and critical thinking.

The client, Senselogic, had noticed an increased demand for an e-commerce system integrated into its product, SiteVision, something that did not previously exist. Senselogic wanted to integrate a third-party system to manage e-commerce. The problem was that there were very many e-commerce solutions to choose from. In order to select the best system it was necessary to evaluate the e-commerce systems and compare them to each other. To identify the elements that has to be included in an e-commerce system a study of literature was conducted.

This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material.

SharePoint is a web based platform designed to provide internal communications and file sharing for businesses and organizations.In this project, we created a system consisting of multiple applications to be used together with SharePoint. These applications are meant to simplify the workflow for internal orders of products. The system is targeted towards companies that do not have a flexible approach to digital orders or companies that want to integrate this functionality into their SharePoint platform. The project includes, in addition to the creation of the system, installation of the software and the servers needed to run a SharePoint environment and their configurations.The system consists of four applications where one of these, the store application, is required for the system to be used at all. The other applications are an order management application, a purchase application and an incoming delivery application. Of these four, we have implemented the store application and the order management application. Our hope is that users will find the system easy to use and graphically appealing..

The purpose of this retrospective study was to investigate the prescription of antibiotics to dogs at the small animal clinic at Ecole Nationale Vétérinaire, Nantes, France. The purpose was also to compare the possible prescription patterns in France with those seen in a similar study by Petersson (2003) at the small animal clinic at the Swedish University of Agricultural Sciences, Uppsala. Antibiotics are very important in veterinary medicine and are used both to treat infections and to prevent them. The use of antibiotics however is not without complications and the risk of developing antimicrobial resistance is of most concern. Resistance has been shown to exist against all currently known antibiotics and potentially all pathogenic bacteria could develop resistance to one or more antibiotics. This study analysed the case records for all dogs presented to the small animal clinic at Ecole Nationale Vétérinaire, Nantes, France during October 2001 and March 2002 to identify patients which were treated with systemic antibiotics. For these cases the antibiotic used, classified according to the ATCvet system, and the indication for use was noted. A total of 292 cases (146 per month) resulted in administration of systemic antibiotics.

Ett ERP-system syftar till att ta hand om företagets resurser och skapa ett enhetligt integrerat system för dessa. ERP-system kan också användas för informationsutbyte mellan företaget, kunden och leverantörens system. Behov av ERP-system finns inom de flesta branscher oavsett storlek och inriktning men kritik har riktats mot att systemen inte lever upp till användarnas förväntningar eller tillfredställer användarens behov. Arbetets fokus ligger koncentrerat på hur mindre företags uppfattning om ERP-system är och vad som krävs av en ERP-leverantör för att i framtiden tillfredställa mindre företag. En surveyundersökning har använts för att få fram relevant information för att lösa min problemprecisering.

This document is a summary of my work to create a project management system for a small firm working with computer graphics. The intention is to manage customers, projects, images and invoices in the easiest possible way. To make the system as flexible as possible a web-interface was chosen which makes it possible to access the system from any computer, making it independent of any particular operating system. The only requirement on the user environment is that the computer must have a connection to the Internet to be able to access the system. The different techniques that have been used to develop the project management system is primarily Ruby on Rails and a MySQL database.

This study will shed light on the subject of system management and system management models. It is important that everyone within an administrative organization understand business objectives and needs of the users who work with the systems. It is vital for the activity to form a structured approach for its management, which includes a system management model. Every company has its individual system management model that is tailored to support their management of a business IT systems. According to Brandt (2000), a system management system model is defined as "an idealized image of how you want the system management work is conducted".

S2 CRM is a Customer Relations Management system built in classic ASP that runs on a web server servicing customers with varying needs. The purpose of this thesis work is to convert parts of the system to the web development environment ASP.NET. The purpose is also to gain knowledge of the framework itself. The ASP.NET environment is compared with another framework, JBoss Seam, in order to understand the differences and to evaluate the possibility of using another framework than ASP.NET, when building the new system. The outcome of this comparison is that although JBoss Seam is just as good, and in some aspects better than ASP.NET, the use of ASP.NET simplifies the continuation of development on the S2 CRM product.

The aim of this study is to examine if library and archive will meet professionally in digitization projects. The study has been conducted as a discourse analysis in accordance with the methods of Norman Fairclough, professor of Linguistics at Lancaster University. The texts are seen as linguistic and semiotic elements of social events that can be analyzed as parts of the social process ? discourse. The relationship between events and structures in society will be part of the social practice.The basic data derive from five public documents collected from Swedish government agencies.

This Thesis aims to explore how to integrate an IT-system for facilitating anorganizations work with Continous Impprovements.This is done here by examining and analyzing the process within a handful ofcompanies who seem to have been successful with their own implementations. Thestudy is focused on the implementation of one particular system, "System C2".Simliarities and differences between the companies, and the established rule of thumbfor these kind of activities are focused upon. This to emphasis how another actormight emulate some of the apparent success.Part of the core question is found in the title, since Continous Improvement is oftenseen as a relativly low-risk activity, is it then also possible to take a low-risk slow pathto the implementation of such a system in the entire organization?.

An increasingly globalized market is leading to hard competition among manufacturing companies, which means that they are forced to become more customer focused to survive in the market. A Customer Relationship Management system is a system that will be of assistance to help companies succeed in building long term relationships with their customers. Best of Breed and ERP-based are two types of CRM systems. The study has focused on analyzing and examine the need for CRM systems at manufacturing companies. Our question formulation has been:? What need do businesses want to satisfy with a Best of Breed-based and ERP-based CRM system?? Are there any differences in the use of Best of Breed-based and ERP-based CRM system?In this study, we have chosen to carry out interviews and quantitative surveys with manufacturing companies to get their view of CRM-systems.